lkml.org 
[lkml]   [2009]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: USB memory card reader and 64MB SD card - 2.6.28-git14
rhubbell wrote:
> Darn, I meant to respond to the list also.
> Anyway there is no dmesg output for the card.
> The dmesg output looks correct with the 128MB card.
>
> Here's for the 128:
> scsi0 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> scsi 0:0:0:0: Direct-Access USB Card Reader 1.01 PQ: 0 ANSI: 0 CCS
> sd 0:0:0:0: [sda] 251904 512-byte hardware sectors: (128 MB/123 MiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> sd 0:0:0:0: [sda] 251904 512-byte hardware sectors: (128 MB/123 MiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
> sd 0:0:0:0: [sda] Attached SCSI removable disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> usb-storage: device scan complete

That output seems rather normal.. If you're not getting anything like
that with the other card though, I would tend to suspect some kind of
issue with the card, the reader or some kind of incompatibility between
them. Certainly all the USB resets from the other output would tend to
suggest the reader isn't responding properly with that card installed..


\
 
 \ /
  Last update: 2009-01-14 04:57    [W:0.073 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site