lkml.org 
[lkml]   [2008]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: sdhci: Loads of scary messages during suspend/resume with SD card inserted
More to the point, how about this one? It should also handle the resume 
case, but I haven't tested it yet.

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index ea8d7a3..806bcd8 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -48,23 +48,6 @@ config MMC_SDHCI_PCI

If unsure, say N.

-config MMC_RICOH_MMC
- tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
- depends on MMC_SDHCI_PCI
- help
- This selects the disabler for the Ricoh MMC Controller. This
- proprietary controller is unnecessary because the SDHCI driver
- supports MMC cards on the SD controller, but if it is not
- disabled, it will steal the MMC cards away - rendering them
- useless. It is safe to select this driver even if you don't
- have a Ricoh based card reader.
-
-
- To compile this driver as a module, choose M here:
- the module will be called ricoh_mmc.
-
- If unsure, say Y.
-
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index c794cc5..0676890 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
-obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c
deleted file mode 100644
index a16d760..0000000
--- a/drivers/mmc/host/ricoh_mmc.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * ricoh_mmc.c - Dummy driver to disable the Rioch MMC controller.
- *
- * Copyright (C) 2007 Philip Langdale, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-/*
- * This is a conceptually ridiculous driver, but it is required by the way
- * the Ricoh multi-function R5C832 works. This chip implements firewire
- * and four different memory card controllers. Two of those controllers are
- * an SDHCI controller and a proprietary MMC controller. The linux SDHCI
- * driver supports MMC cards but the chip detects MMC cards in hardware
- * and directs them to the MMC controller - so the SDHCI driver never sees
- * them. To get around this, we must disable the useless MMC controller.
- * At that point, the SDHCI controller will start seeing them. As a bonus,
- * a detection event occurs immediately, even if the MMC card is already
- * in the reader.
- *
- * The relevant registers live on the firewire function, so this is unavoidably
- * ugly. Such is life.
- */
-
-#include <linux/pci.h>
-
-#define DRIVER_NAME "ricoh-mmc"
-
-static const struct pci_device_id pci_ids[] __devinitdata = {
- {
- .vendor = PCI_VENDOR_ID_RICOH,
- .device = PCI_DEVICE_ID_RICOH_R5C843,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },
- { /* end: all zeroes */ },
-};
-
-MODULE_DEVICE_TABLE(pci, pci_ids);
-
-static int ricoh_mmc_disable(struct pci_dev *fw_dev)
-{
- u8 write_enable;
- u8 write_target;
- u8 disable;
-
- if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) {
- /* via RL5C476 */
-
- pci_read_config_byte(fw_dev, 0xB7, &disable);
- if (disable & 0x02) {
- printk(KERN_INFO DRIVER_NAME
- ": Controller already disabled. " \
- "Nothing to do.\n");
- return -ENODEV;
- }
-
- pci_read_config_byte(fw_dev, 0x8E, &write_enable);
- pci_write_config_byte(fw_dev, 0x8E, 0xAA);
- pci_read_config_byte(fw_dev, 0x8D, &write_target);
- pci_write_config_byte(fw_dev, 0x8D, 0xB7);
- pci_write_config_byte(fw_dev, 0xB7, disable | 0x02);
- pci_write_config_byte(fw_dev, 0x8E, write_enable);
- pci_write_config_byte(fw_dev, 0x8D, write_target);
- } else {
- /* via R5C832 */
-
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- if (disable & 0x02) {
- printk(KERN_INFO DRIVER_NAME
- ": Controller already disabled. " \
- "Nothing to do.\n");
- return -ENODEV;
- }
-
- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
- }
-
- printk(KERN_INFO DRIVER_NAME
- ": Controller is now disabled.\n");
-
- return 0;
-}
-
-static int ricoh_mmc_enable(struct pci_dev *fw_dev)
-{
- u8 write_enable;
- u8 write_target;
- u8 disable;
-
- if (fw_dev->device == PCI_DEVICE_ID_RICOH_RL5C476) {
- /* via RL5C476 */
-
- pci_read_config_byte(fw_dev, 0x8E, &write_enable);
- pci_write_config_byte(fw_dev, 0x8E, 0xAA);
- pci_read_config_byte(fw_dev, 0x8D, &write_target);
- pci_write_config_byte(fw_dev, 0x8D, 0xB7);
- pci_read_config_byte(fw_dev, 0xB7, &disable);
- pci_write_config_byte(fw_dev, 0xB7, disable & ~0x02);
- pci_write_config_byte(fw_dev, 0x8E, write_enable);
- pci_write_config_byte(fw_dev, 0x8D, write_target);
- } else {
- /* via R5C832 */
-
- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
- }
-
- printk(KERN_INFO DRIVER_NAME
- ": Controller is now re-enabled.\n");
-
- return 0;
-}
-
-static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- u8 rev;
- u8 ctrlfound = 0;
-
- struct pci_dev *fw_dev = NULL;
-
- BUG_ON(pdev == NULL);
- BUG_ON(ent == NULL);
-
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
-
- printk(KERN_INFO DRIVER_NAME
- ": Ricoh MMC controller found at %s [%04x:%04x] (rev %x)\n",
- pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
- (int)rev);
-
- while ((fw_dev =
- pci_get_device(PCI_VENDOR_ID_RICOH,
- PCI_DEVICE_ID_RICOH_RL5C476, fw_dev))) {
- if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
- pdev->bus == fw_dev->bus) {
- if (ricoh_mmc_disable(fw_dev) != 0)
- return -ENODEV;
-
- pci_set_drvdata(pdev, fw_dev);
-
- ++ctrlfound;
- break;
- }
- }
-
- fw_dev = NULL;
-
- while (!ctrlfound &&
- (fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH,
- PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
- if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
- pdev->bus == fw_dev->bus) {
- if (ricoh_mmc_disable(fw_dev) != 0)
- return -ENODEV;
-
- pci_set_drvdata(pdev, fw_dev);
-
- ++ctrlfound;
- }
- }
-
- if (!ctrlfound) {
- printk(KERN_WARNING DRIVER_NAME
- ": Main firewire function not found. Cannot disable controller.\n");
- return -ENODEV;
- }
-
- return 0;
-}
-
-static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
-{
- struct pci_dev *fw_dev = NULL;
-
- fw_dev = pci_get_drvdata(pdev);
- BUG_ON(fw_dev == NULL);
-
- ricoh_mmc_enable(fw_dev);
-
- pci_set_drvdata(pdev, NULL);
-}
-
-static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct pci_dev *fw_dev = NULL;
-
- fw_dev = pci_get_drvdata(pdev);
- BUG_ON(fw_dev == NULL);
-
- printk(KERN_INFO DRIVER_NAME ": Suspending.\n");
-
- ricoh_mmc_enable(fw_dev);
-
- return 0;
-}
-
-static int ricoh_mmc_resume(struct pci_dev *pdev)
-{
- struct pci_dev *fw_dev = NULL;
-
- fw_dev = pci_get_drvdata(pdev);
- BUG_ON(fw_dev == NULL);
-
- printk(KERN_INFO DRIVER_NAME ": Resuming.\n");
-
- ricoh_mmc_disable(fw_dev);
-
- return 0;
-}
-
-static struct pci_driver ricoh_mmc_driver = {
- .name = DRIVER_NAME,
- .id_table = pci_ids,
- .probe = ricoh_mmc_probe,
- .remove = __devexit_p(ricoh_mmc_remove),
- .suspend = ricoh_mmc_suspend,
- .resume = ricoh_mmc_resume,
-};
-
-/*****************************************************************************\
- * *
- * Driver init/exit *
- * *
-\*****************************************************************************/
-
-static int __init ricoh_mmc_drv_init(void)
-{
- printk(KERN_INFO DRIVER_NAME
- ": Ricoh MMC Controller disabling driver\n");
- printk(KERN_INFO DRIVER_NAME ": Copyright(c) Philip Langdale\n");
-
- return pci_register_driver(&ricoh_mmc_driver);
-}
-
-static void __exit ricoh_mmc_drv_exit(void)
-{
- pci_unregister_driver(&ricoh_mmc_driver);
-}
-
-module_init(ricoh_mmc_drv_init);
-module_exit(ricoh_mmc_drv_exit);
-
-MODULE_AUTHOR("Philip Langdale <philipl@alumni.utexas.net>");
-MODULE_DESCRIPTION("Ricoh MMC Controller disabling driver");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 9236e7f..4557fa3 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1790,6 +1790,74 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
PCI_DEVICE_ID_NX2_5709S,
quirk_brcm_570x_limit_vpd);

+/*
+ * This is a conceptually ridiculous quirk, but it is required by the
+ * way the Ricoh multi-function R5C832 works. This chip implements
+ * firewire and four different memory card controllers. Two of those
+ * controllers are an SDHCI controller and a proprietary MMC
+ * controller. The linux SDHCI driver supports MMC cards but the chip
+ * detects MMC cards in hardware and directs them to the MMC
+ * controller - so the SDHCI driver never sees them. To get around
+ * this, we must disable the useless MMC controller. At that point,
+ * the SDHCI controller will start seeing them. As a bonus, a
+ * detection event occurs immediately, even if the MMC card is already
+ * in the reader.
+ *
+ * The relevant registers live on the firewire function, so this is
+ * unavoidably ugly. Such is life.
+ */
+
+static void quirk_ricoh_rl5c476_mmc_disable(struct pci_dev *dev)
+{
+ u8 write_enable;
+ u8 write_target;
+ u8 disable;
+
+ pci_read_config_byte(dev, 0xB7, &disable);
+
+ if (disable & 0x02)
+ /* Already disabled */
+ return;
+
+ pci_read_config_byte(dev, 0x8E, &write_enable);
+ pci_write_config_byte(dev, 0x8E, 0xAA);
+ pci_read_config_byte(dev, 0x8D, &write_target);
+ pci_write_config_byte(dev, 0x8D, 0xB7);
+ pci_write_config_byte(dev, 0xB7, disable | 0x02);
+ pci_write_config_byte(dev, 0x8E, write_enable);
+ pci_write_config_byte(dev, 0x8D, write_target);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH,
+ PCI_DEVICE_ID_RICOH_RL5C476,
+ quirk_ricoh_rl5c476_mmc_disable);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH,
+ PCI_DEVICE_ID_RICOH_RL5C476,
+ quirk_ricoh_rl5c476_mmc_disable);
+
+static void quirk_ricoh_rl5c832_mmc_disable(struct pci_dev *dev)
+{
+ u8 disable;
+ u8 write_enable;
+
+ pci_read_config_byte(dev, 0xCB, &disable);
+
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0xCA, &write_enable);
+ pci_write_config_byte(dev, 0xCA, 0x57);
+ pci_write_config_byte(dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(dev, 0xCA, write_enable);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH,
+ PCI_DEVICE_ID_RICOH_RL5C476,
+ quirk_ricoh_rl5c832_mmc_disable);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH,
+ PCI_DEVICE_ID_RICOH_RL5C476,
+ quirk_ricoh_rl5c832_mmc_disable);
+
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
--
Matthew Garrett | mjg59@srcf.ucam.org

\
 
 \ /
  Last update: 2008-09-29 14:15    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site