lkml.org 
[lkml]   [2008]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] fsl-dma: allow Freescale Elo DMA driver to be compiled as a module
On Thu, Sep 25, 2008 at 5:59 AM, Timur Tabi <timur@freescale.com> wrote:
> Modify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as
> a module.
>
> The primary change is to stop treating the DMA controller as a bus, and the
> DMA channels as devices on the bus. This is because the Open Firmware (OF)
> kernel code does not allow busses to be removed, so although we can call
> of_platform_bus_probe() to probe the DMA channels, there is no
> of_platform_bus_remove(). Instead, the DMA channels are manually probed,
> similar to what fsl_elbc_nand.c does.
>
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---
>
> v2: updated per comments
>
> This patch is for the 2.6.28 kernel. This patch exposes a bug in the dmatest
> module, so my other patch "dmatest: properly handle duplicate DMA channels"
> should be applied if this patch is applied.
[snip]
> +static void __exit of_fsl_dma_exit(void)
> +{
> + of_unregister_platform_driver(&of_fsl_dma_driver);
> }
>
> -subsys_initcall(of_fsl_dma_chan_init);
> subsys_initcall(of_fsl_dma_init);

Not a critical problem. But module_init() are preferred for modules.

> +module_exit(of_fsl_dma_exit);
> +
> +MODULE_DESCRIPTION("Freescale Elo / Elo Plus DMA driver");
> +MODULE_LICENSE("GPL");

Acked-by: Li Yang <leoli@freescale.com>

- Leo


\
 
 \ /
  Last update: 2008-09-25 08:57    [W:2.144 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site