lkml.org 
[lkml]   [2008]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: bad DMAR interaction with iwlagn and SATA
Andres Freund wrote:
> Hi Jeff,
>
> On Friday 26 September 2008, you wrote in "Re: bad DMAR interaction with
> iwlagn and SATA":
>> Andres Freund wrote:
>>> sleeping I activated DMAR...
>>> ..
>>> Second:
>>> [ 2937.484251] DMAR:[DMA Read] Request device [00:1f.2] fault addr
>>> fffbf000 [ 2937.484255] DMAR:[fault reason 06] PTE Read access is not set
>>> [ 2937.484297] ata1.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action
>>> 0x6 frozen
>>> [ 2937.484303] ata1.00: irq_stat 0x20000000, host bus error
>>> [ 2937.484309] ata1: SError: { HostInt }
>>> [ 2937.484319] ata1.00: cmd 61/08:00:c0:1d:6b/00:00:07:00:00/40 tag 0 ncq
>>> 4096 out
>>> [ 2937.484321] res 40/00:00:c0:1d:6b/00:00:07:00:00/40 Emask
>>> 0x60 (host bus error)
>> Ouch, a host bus error is serious nastiness...
> I only hit that with DMAR activated (hit it twice, different boots), so it
> seems to be related to that. Is there anything I can help to debug that?

No idea about DMAR. On the ATA side, it pretty diagnoses itself as you
see here. Unfortunately, ATA controller is behaving exactly as it
should, when a major system error is thrown its way.

Jeff





\
 
 \ /
  Last update: 2008-09-26 04:43    [W:0.055 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site