lkml.org 
[lkml]   [2008]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 4/6] kmsg: convert xpram messages to kmsg api.
From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

Documentation/kmsg/s390/xpram | 61 ++++++++++++++++++++++++++++++++++++++++++
drivers/s390/block/xpram.c | 41 +++++++++++++---------------
2 files changed, 80 insertions(+), 22 deletions(-)

Index: kmsg-2.6/Documentation/kmsg/s390/xpram
===================================================================
--- /dev/null
+++ kmsg-2.6/Documentation/kmsg/s390/xpram
@@ -0,0 +1,61 @@
+/*?
+ * Tag: xpram.ab9aa4
+ * Text: "%d is not a valid number of XPRAM devices\n"
+ * Severity: Error
+ * Parameter:
+ * @1: number of partitions
+ * Description:
+ * The number of XPRAM partitions specified for the 'devs' module parameter
+ * or with the 'xpram.parts' kernel parameter must be an integer in the
+ * range 1 to 32. The XPRAM device driver created a maximum of 32 partitions
+ * that are probably not configured as intended.
+ * User action:
+ * If the XPRAM device driver has been compiled as a separate module,
+ * unload the module and load it again with a correct value for the
+ * 'devs' module parameter. If the XPRAM device driver has been compiled
+ * into the kernel, correct the 'xpram.parts' parameter in the kernel
+ * command line and restart Linux.
+ */
+
+/*?
+ * Tag: xpram.f004d1
+ * Text: "Not enough expanded memory available\n"
+ * Severity: Error
+ * Description:
+ * The amount of expanded memory required to set up your XPRAM partitions
+ * depends on the 'sizes' parameter specified for the xpram module or on
+ * the specifications for the 'xpram.parts' parameter if the XPRAM device
+ * driver has been compiled into the kernel. Your
+ * current specification exceed the amount of available expanded memory.
+ * Your XPRAM partitions are probably not configured as intended.
+ * User action:
+ * If the XPRAM device driver has been compiled as a separate module,
+ * unload the xpram module and load it again with an appropriate value
+ * for the 'sizes' module parameter. If the XPRAM device driver has been
+ * compiled into the kernel, adjust the 'xpram.parts' parameter in the
+ * kernel command line and restart Linux. If you need more than the
+ * available expanded memory, increase the expanded memory allocation for
+ * your virtual hardware or LPAR.
+ */
+
+/*?
+ * Tag: xpram.f6ae78
+ * Text: "No expanded memory available\n"
+ * Severity: Error
+ * Description:
+ * The XPRAM device driver has been loaded in a Linux instance that runs
+ * in an LPAR or virtual hardware without expanded memory.
+ * are created.
+ * User action:
+ * Allocate expanded memory for your LPAR or virtual hardware or do not
+ * load the xpram module. You can ignore this message, if you do not want
+ * to create XPRAM partitions.
+ */
+
+/*? Tag: xpram.fc5e30 Text: " number of devices (partitions): %d \n" */
+/*? Tag: xpram.9a3d44 Text: " size of partition %d: %u kB\n" */
+/*? Tag: xpram.d1b9da Text: " size of partition %d to be set automatically\n" */
+/*? Tag: xpram.758fd6 Text: " memory needed (for sized partitions): %lu kB\n" */
+/*? Tag: xpram.3fc92b Text: " partitions to be sized automatically: %d\n" */
+/*? Tag: xpram.6cdcc1 Text: " automatically determined partition size: %lu kB\n" */
+/*? Tag: xpram.546055 Text: " %u pages expanded memory found (%lu KB).\n" */
Index: kmsg-2.6/drivers/s390/block/xpram.c
===================================================================
--- kmsg-2.6.orig/drivers/s390/block/xpram.c
+++ kmsg-2.6/drivers/s390/block/xpram.c
@@ -25,6 +25,8 @@
* generic hard disk support to replace ad-hoc partitioning
*/

+#define KMSG_COMPONENT "xpram"
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ctype.h> /* isdigit, isxdigit */
@@ -36,18 +38,13 @@
#include <linux/hdreg.h> /* HDIO_GETGEO */
#include <linux/sysdev.h>
#include <linux/bio.h>
+#include <linux/kmsg.h>
#include <asm/uaccess.h>

#define XPRAM_NAME "xpram"
#define XPRAM_DEVS 1 /* one partition */
#define XPRAM_MAX_DEVS 32 /* maximal number of devices (partitions) */

-#define PRINT_DEBUG(x...) printk(KERN_DEBUG XPRAM_NAME " debug:" x)
-#define PRINT_INFO(x...) printk(KERN_INFO XPRAM_NAME " info:" x)
-#define PRINT_WARN(x...) printk(KERN_WARNING XPRAM_NAME " warning:" x)
-#define PRINT_ERR(x...) printk(KERN_ERR XPRAM_NAME " error:" x)
-
-
typedef struct {
unsigned int size; /* size of xpram segment in pages */
unsigned int offset; /* start page of xpram segment */
@@ -263,7 +260,7 @@ static int __init xpram_setup_sizes(unsi

/* Check number of devices. */
if (devs <= 0 || devs > XPRAM_MAX_DEVS) {
- PRINT_ERR("invalid number %d of devices\n",devs);
+ kmsg_err("%d is not a valid number of XPRAM devices\n",devs);
return -EINVAL;
}
xpram_devs = devs;
@@ -294,22 +291,22 @@ static int __init xpram_setup_sizes(unsi
mem_auto_no++;
}

- PRINT_INFO(" number of devices (partitions): %d \n", xpram_devs);
+ kmsg_info(" number of devices (partitions): %d \n", xpram_devs);
for (i = 0; i < xpram_devs; i++) {
if (xpram_sizes[i])
- PRINT_INFO(" size of partition %d: %u kB\n",
- i, xpram_sizes[i]);
+ kmsg_info(" size of partition %d: %u kB\n",
+ i, xpram_sizes[i]);
else
- PRINT_INFO(" size of partition %d to be set "
- "automatically\n",i);
+ kmsg_info(" size of partition %d to be set "
+ "automatically\n",i);
}
- PRINT_DEBUG(" memory needed (for sized partitions): %lu kB\n",
- mem_needed);
- PRINT_DEBUG(" partitions to be sized automatically: %d\n",
- mem_auto_no);
+ kmsg_info(" memory needed (for sized partitions): %lu kB\n",
+ mem_needed);
+ kmsg_info(" partitions to be sized automatically: %d\n",
+ mem_auto_no);

if (mem_needed > pages * 4) {
- PRINT_ERR("Not enough expanded memory available\n");
+ kmsg_err("Not enough expanded memory available\n");
return -EINVAL;
}

@@ -321,8 +318,8 @@ static int __init xpram_setup_sizes(unsi
*/
if (mem_auto_no) {
mem_auto = ((pages - mem_needed / 4) / mem_auto_no) * 4;
- PRINT_INFO(" automatically determined "
- "partition size: %lu kB\n", mem_auto);
+ kmsg_info(" automatically determined "
+ "partition size: %lu kB\n", mem_auto);
for (i = 0; i < xpram_devs; i++)
if (xpram_sizes[i] == 0)
xpram_sizes[i] = mem_auto;
@@ -412,12 +409,12 @@ static int __init xpram_init(void)

/* Find out size of expanded memory. */
if (xpram_present() != 0) {
- PRINT_WARN("No expanded memory available\n");
+ kmsg_err("No expanded memory available\n");
return -ENODEV;
}
xpram_pages = xpram_highest_page_index() + 1;
- PRINT_INFO(" %u pages expanded memory found (%lu KB).\n",
- xpram_pages, (unsigned long) xpram_pages*4);
+ kmsg_info(" %u pages expanded memory found (%lu KB).\n",
+ xpram_pages, (unsigned long) xpram_pages*4);
rc = xpram_setup_sizes(xpram_pages);
if (rc)
return rc;
--
blue skies,
Martin.

"Reality continues to ruin my life." - Calvin.



\
 
 \ /
  Last update: 2008-09-25 18:51    [W:0.108 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site