Messages in this thread | | | Date | Wed, 24 Sep 2008 11:41:43 +0100 | Subject | fastboot: usbmon WARNING | From | Alan Jenkins <> |
| |
Arjan van de Ven wrote: > The fastboot.git tree has a set of patches (all posted and reviewed on lkml before) > that speed up the kernel boot process of the kernel. > > There's 3 major pieces of this > 1) The creation of an asynchronous initcall level (6a) that runs asynchronous from > the regular driver init, and is for non-boot critical initcalls only > 2) A rework of the non-initrd boot code to try mounting /, and if that fails, > only THEN wait for all the various driver probings to finish (and then retry) > 3) A tool "bootgraph.pl" that outputs a SVG graphic of where the kernel boot spends > its time
Enabling fastboot makes usbmon (CONFIG_USB_MON) squawk, trying to create duplicate sysfs files.
I see mon_init is run in parallel with uhci_hcd_init (see attached bootgraph.pl output). Maybe it would go away if mon_init was also moved to the asynchronous runlevel - it should be non-boot critical.
And maybe this was a latent bug that needs fixing regardless.
Yours Alan
[ 1.030041] usb 1-8: new high speed USB device using ehci_hcd and address 3 [ 1.030359] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3 [ 1.030512] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.030522] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.030736] initcall piix_init+0x0/0x20 returned 0 after 525 msecs [ 1.030844] calling mon_init+0x0/0xd1 @ 1 [ 1.031038] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.031218] uhci_hcd 0000:00:1d.0: irq 3, io base 0x0000e400 [ 1.031731] usb usb2: configuration #1 chosen from 1 choice [ 1.031997] hub 2-0:1.0: USB hub found [ 1.032109] hub 2-0:1.0: 2 ports detected [ 1.133721] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 1.133871] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.133879] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.134224] ------------[ cut here ]------------ [ 1.134320] WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x27/0x2f() [ 1.134422] sysfs: duplicate filename 'usbmon3' can not be created [ 1.134522] Modules linked in: [ 1.134656] Pid: 1, comm: swapper Not tainted 2.6.27-rc6eeepc #30 [ 1.134760] [<c0119215>] warn_slowpath+0x61/0x85 [ 1.134908] [<c01ae295>] number+0x13d/0x217 [ 1.135050] [<c0114819>] __dequeue_entity+0x1f/0x71 [ 1.135197] [<c01aacd0>] idr_get_empty_slot+0x122/0x1e6 [ 1.135341] [<c01aae63>] ida_get_new_above+0xcf/0x148 [ 1.135483] [<c018cf4e>] sysfs_new_dirent+0x24/0xc7 [ 1.135625] [<c018cc1f>] sysfs_ilookup_test+0x0/0xd [ 1.135769] [<c016c9e2>] ifind+0xa/0x49 [ 1.135909] [<c018ce10>] sysfs_find_dirent+0x13/0x23 [ 1.136052] [<c018cea2>] sysfs_add_one+0x27/0x2f [ 1.136193] [<c018d279>] create_dir+0x3c/0x6b [ 1.136332] [<c018d2d1>] sysfs_create_dir+0x29/0x3b [ 1.136474] [<c01ab6a8>] kobject_get+0xf/0x13 [ 1.136613] [<c01ab787>] kobject_add_internal+0x9b/0x134 [ 1.136777] [<c01abb0d>] kobject_add+0x4a/0x4e [ 1.136916] [<c01fa6a0>] device_add+0x75/0x4b6 [ 1.137058] [<c01fa3ec>] device_initialize+0x77/0x9f [ 1.137199] [<c01fab69>] device_create_vargs+0x78/0x99 [ 1.137342] [<c03da27c>] mon_init+0x0/0xd1 [ 1.137484] [<c01fabae>] device_create+0x24/0x28 [ 1.137625] [<c022e2a8>] mon_bin_add+0x3b/0x54 [ 1.137769] [<c022c69b>] mon_bus_init+0x45/0x77 [ 1.137909] [<c03da30d>] mon_init+0x91/0xd1 [ 1.138047] [<c010112b>] _stext+0x43/0x111 [ 1.138188] [<c0113c00>] __sched_fork+0x4b/0x6f [ 1.138329] [<c011671e>] __wake_up+0xf/0x15 [ 1.138469] [<c0124298>] insert_work+0x40/0x44 [ 1.138611] [<c03c2719>] kernel_init+0xcb/0x12e [ 1.138757] [<c03c264e>] kernel_init+0x0/0x12e [ 1.138895] [<c010415f>] kernel_thread_helper+0x7/0x10 [ 1.139040] ======================= [ 1.139142] ---[ end trace 32b8bb2cd8e5acac ]--- [ 1.139240] kobject_add_internal failed for usbmon3 with -EEXIST, don't try to register things with the same name in the same directory. [ 1.139401] Pid: 1, comm: swapper Tainted: G W 2.6.27-rc6eeepc #30 [ 1.139504] [<c01ab7ea>] kobject_add_internal+0xfe/0x134 [ 1.139650] [<c01abb0d>] kobject_add+0x4a/0x4e [ 1.139789] [<c01fa6a0>] device_add+0x75/0x4b6 [ 1.139928] [<c01fa3ec>] device_initialize+0x77/0x9f [ 1.140077] [<c01fab69>] device_create_vargs+0x78/0x99 [ 1.140219] [<c03da27c>] mon_init+0x0/0xd1 [ 1.140357] [<c01fabae>] device_create+0x24/0x28 [ 1.140497] [<c022e2a8>] mon_bin_add+0x3b/0x54 [ 1.140637] [<c022c69b>] mon_bus_init+0x45/0x77 [ 1.140777] [<c03da30d>] mon_init+0x91/0xd1 [ 1.140916] [<c010112b>] _stext+0x43/0x111 [ 1.141053] [<c0113c00>] __sched_fork+0x4b/0x6f [ 1.141193] [<c011671e>] __wake_up+0xf/0x15 [ 1.141333] [<c0124298>] insert_work+0x40/0x44 [ 1.141473] [<c03c2719>] kernel_init+0xcb/0x12e [ 1.141612] [<c03c264e>] kernel_init+0x0/0x12e [ 1.141751] [<c010415f>] kernel_thread_helper+0x7/0x10 [ 1.141893] ======================= [ 1.142142] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.142334] uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000e480 [ 1.142699] initcall mon_init+0x0/0xd1 returned 0 after 106 msecs
[image] | |