Messages in this thread | | | Subject | Re: [2.6.27-rc6-mm1] Boot hangs while initializing SCSI disk. | From | Tetsuo Handa <> | Date | Mon, 22 Sep 2008 21:22:52 +0900 |
| |
Hello.
I tried with different config.
Using http://I-love.SAKURA.ne.jp/tmp/config-2.6.27-rc6-mm1-2 , I got below output.
---------------------------------------- Linux version 2.6.27-rc6-mm1 (root@tomoyo) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #6 SMP Mon Sep 22 13:31:47 JST 2008 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Cyrix CyrixInstead NSC Geode by NSC Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data) BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) last_pfn = 0x40000 max_arch_pfn = 0x100000 RAMDISK: 3fb35000 - 3fee0000 Allocated new RAMDISK: 01186000 - 01531000 Move RAMDISK from 000000003fb35000 - 000000003fedffff to 01186000 - 01530fff DMI present. ACPI: RSDP 000F6C60, 0014 (r0 PTLTD ) ACPI: RSDT 3FEFAB5A, 0030 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 3FEFEF06, 0074 (r1 INTEL 440BX 6040000 PTL F4240) ACPI: DSDT 3FEFAB8A, 437C (r1 PTLTD Custom 6040000 MSFT 100000D) ACPI: FACS 3FEFFFC0, 0040 ACPI: APIC 3FEFEF7A, 005E (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 3FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) 140MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 00000000 - 373fe000 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000116f8c8] TEXT DATA BSS ==> [0000400000 - 000116f8c8] #4 [0001170000 - 0001186000] INIT_PG_TABLE ==> [0001170000 - 0001186000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0001186000 - 0001531000] NEW RAMDISK ==> [0001186000 - 0001531000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f6cd0] 000f6cd0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x00040000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003fef0 0: 0x0003ff00 -> 0x00040000 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) PERCPU: Allocating 1212416 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255886 Kernel command line: root=/dev/sda1 ro console=ttyS0,115200n8 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1992.960 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 2463 kB per task-struct memory footprint: 1920 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1002260k/1048576k available (2819k kernel code, 45512k reserved, 4180k data, 1464k init, 143304k highmem) virtual kernel memory layout: fixmap : 0xffc58000 - 0xfffff000 (3740 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0ada000 - 0xc0c48000 (1464 kB) .data : 0xc06c0c19 - 0xc0ad5d1c (4180 kB) .text : 0xc0400000 - 0xc06c0c19 (2819 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. kmemtrace: early init successful. Calibrating delay loop (skipped), value calculated using timer frequency.. 3985.92 BogoMIPS (lpj=1992960) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. ACPI: Core revision 20080729 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 14129 hash entries in 55 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08 lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.37 BogoMIPS (lpj=1995185) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7976.29 BogoMIPS). khelper used greatest stack depth: 2980 bytes left net_namespace: 912 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2 PCI: Using configuration type 1 for base access khelper used greatest stack depth: 2960 bytes left ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:505 sysfs_add_one+0x48/0x66() sysfs: duplicate filename 'acpi' can not be created Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.27-rc6-mm1 #6 [<c0432b67>] warn_slowpath+0x50/0x6f [<c0453c3a>] ? trace_hardirqs_off_caller+0x3e/0xe0 [<c0453ce7>] ? trace_hardirqs_off+0xb/0xd [<c0408bf8>] ? native_sched_clock+0xb8/0xcf [<c0452b20>] ? check_chain_key+0xc0/0x1e4 [<c04bdaf0>] ? ifind+0x99/0xa3 [<c0455e25>] ? __lock_release+0x4b/0x51 [<c04bdaf0>] ? ifind+0x99/0xa3 [<c053de16>] ? _raw_spin_unlock+0x96/0xba [<c04f40ea>] ? sysfs_find_dirent+0x25/0x3b [<c04f3deb>] ? __sysfs_add_one+0x27/0xa9 [<c04f3eb5>] sysfs_add_one+0x48/0x66 [<c04f41c2>] create_dir+0x46/0x8a [<c04f4262>] sysfs_create_dir+0x41/0x55 [<c0535047>] create_dir+0x13/0x33 [<c0535345>] kobject_add_internal+0x117/0x177 [<c053548e>] kobject_add_varg+0x36/0x3e [<c05354fd>] kobject_init_and_add+0x22/0x27 [<c0aefad2>] kernel_param_sysfs_setup+0xa5/0xee [<c0aefbe8>] param_sysfs_builtin+0xcd/0x13c [<c0aefc9e>] param_sysfs_init+0x47/0x4b [<c040112a>] _stext+0x42/0x10e [<c0aefc57>] ? param_sysfs_init+0x0/0x4b [<c042afaa>] ? wake_up_process+0xf/0x11 [<c04428f6>] ? start_workqueue_thread+0x22/0x25 [<c04429fb>] ? __create_workqueue_key+0x102/0x19a [<c0ada8ed>] do_initcalls+0x89/0xb4 [<c0ada961>] ? kernel_init+0x0/0x8e [<c0ada939>] do_basic_setup+0x21/0x23 [<c0ada9b4>] kernel_init+0x53/0x8e [<c0404ae7>] kernel_thread_helper+0x7/0x10 ======================= ---[ end trace 4eaa2a86a8e2da22 ]--- kobject_add_internal failed for acpi with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1, comm: swapper Tainted: G W 2.6.27-rc6-mm1 #6 [<c0535395>] kobject_add_internal+0x167/0x177 [<c053548e>] kobject_add_varg+0x36/0x3e [<c05354fd>] kobject_init_and_add+0x22/0x27 [<c0aefad2>] kernel_param_sysfs_setup+0xa5/0xee [<c0aefbe8>] param_sysfs_builtin+0xcd/0x13c [<c0aefc9e>] param_sysfs_init+0x47/0x4b [<c040112a>] _stext+0x42/0x10e [<c0aefc57>] ? param_sysfs_init+0x0/0x4b [<c042afaa>] ? wake_up_process+0xf/0x11 [<c04428f6>] ? start_workqueue_thread+0x22/0x25 [<c04429fb>] ? __create_workqueue_key+0x102/0x19a [<c0ada8ed>] do_initcalls+0x89/0xb4 [<c0ada961>] ? kernel_init+0x0/0x8e [<c0ada939>] do_basic_setup+0x21/0x23 [<c0ada9b4>] kernel_init+0x53/0x8e [<c0404ae7>] kernel_thread_helper+0x7/0x10 ======================= Module 'acpi' failed to be added to sysfs, error number -17 The system will be unstable now. ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB pci 0000:00:11.0: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default tracer: 211 pages allocated for 16384 entries of 52 bytes actual entries 16458 system 00:01: ioport range 0x1000-0x103f has been reserved system 00:01: ioport range 0x1040-0x104f has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:11.0: PCI bridge, secondary bus 0000:02 pci 0000:00:11.0: IO window: 0x2000-0x2fff pci 0000:00:11.0: MEM window: disabled pci 0000:00:11.0: PREFETCH window: 0x00000050000000-0x000000500fffff pci 0000:00:11.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [0, 0] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [50000000, 500fffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd debug: unmapping init memory c1186000..c1531000 pci 0000:00:00.0: Limiting direct PCI/PCI transfers Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1222090593.601:1): initialized Testing tracer sched_switch: PASSED Testing tracer sysprof: PASSED Testing tracer ftrace: PASSED Testing dynamic ftrace: PASSED Testing tracer irqsoff: PASSED Testing tracer wakeup: PASSED highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1678 cryptomgr_test used greatest stack depth: 2476 bytes left alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x0 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01) piix 0000:00:07.1: IDE port disabled piix 0000:00:07.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1058-0x105f hda: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive hda: UDMA/33 mode selected ide0 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-floppy driver 1.00 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 kmemtrace: fully up. input: ImPS/2 Generic Wheel Mouse as /class/input/input1 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3756KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done. VFS: Mounted root (cramfs filesystem) readonly. mount used greatest stack depth: 2420 bytes left linuxrc used greatest stack depth: 2068 bytes left debug: unmapping init memory c0ada000..c0c48000 Write protecting the kernel read-only data: 2228k Testing CPA: undo c06c1000-c08ee000 Testing CPA: write protecting again initrd-tools: 0.1.81.1 mount: unknown filesystem type 'devfs' BUG: sleeping function called from invalid context at mm/memory.c:3060 in_atomic(): 0, irqs_disabled(): 1, pid: 430, name: modprobe INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<00000000>] 0x0 hardirqs last disabled at (0): [<c0431186>] copy_process+0x24c/0xbac softirqs last enabled at (0): [<c0431186>] copy_process+0x24c/0xbac softirqs last disabled at (0): [<00000000>] 0x0 Pid: 430, comm: modprobe Tainted: G W 2.6.27-rc6-mm1 #6 [<c042fbcb>] __might_sleep+0xdf/0xe4 [<c041ae24>] ? ftrace_test_p6nop+0x0/0xa [<c0494148>] might_fault+0x1a/0x76 [<c047e3b6>] ? time_hardirqs_off+0x4a/0xea [<c041acf2>] ftrace_modify_code+0x19/0xfc [<c041ae24>] ? ftrace_test_p6nop+0x0/0xa [<c0453c3a>] ? trace_hardirqs_off_caller+0x3e/0xe0 [<c0477036>] ftrace_code_disable+0x31/0x19c [<c041ae24>] ? ftrace_test_p6nop+0x0/0xa [<c0477501>] __ftrace_update_code+0xe3/0x1d3 [<c0478205>] ftrace_convert_nops+0x49/0x6c [<c047823d>] ftrace_init_module+0x15/0x17 [<c045f34e>] load_module+0x962/0xae5 [<c045f543>] sys_init_module+0x46/0x19c [<c0403cfa>] syscall_call+0x7/0xb ======================= BUG: unable to handle kernel paging request at c08837b8 IP: [<c04a5b13>] kmem_cache_create+0xa8/0x486 *pde = 34ff0163 *pte = 00883161 Oops: 0003 [#1] SMP DEBUG_PAGEALLOC last sysfs file: Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: scsi_mod(+)
Pid: 430, comm: modprobe Tainted: G W (2.6.27-rc6-mm1 #6) EIP: 0060:[<c04a5b13>] EFLAGS: 00010246 CPU: 0 EIP is at kmem_cache_create+0xa8/0x486 EAX: f4b8c000 EBX: c08837b8 ECX: 00000000 EDX: 00000000 ESI: f55a56c0 EDI: 00000068 EBP: f4b8cf1c ESP: f4b8cef8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 430, ti=f4b8c000 task=f5746830 task.ti=f4b8c000) Stack: 00000000 c0000000 00000000 00000000 f90940a4 00000038 f90aa600 080529e0 b8038f40 f4b8cf38 f86050a1 00000000 00000000 f90aa600 080529e0 b8038f40 f4b8cf44 f8605009 f90aa600 f4b8cfa0 c040112a 00000000 f8605000 00000000 Call Trace: [<f86050a1>] ? scsi_init_queue+0x1b/0x126 [scsi_mod] [<f8605009>] ? init_scsi+0x9/0x86 [scsi_mod] [<c040112a>] ? _stext+0x42/0x10e [<f8605000>] ? init_scsi+0x0/0x86 [scsi_mod] [<c047ebb6>] ? stack_trace_call+0x4e/0x171 [<c0404b06>] ? ftrace_call+0x5/0x8 [<c045f5a3>] ? sys_init_module+0xa6/0x19c [<c0403cfa>] ? syscall_call+0x7/0xb ======================= Code: c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 <c0> c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 c0 EIP: [<c04a5b13>] kmem_cache_create+0xa8/0x486 SS:ESP 0068:f4b8cef8 ---[ end trace 4eaa2a86a8e2da22 ]--- note: modprobe[430] exited with preempt_count 1 Segmentation fault CPA self-test: 4k 15358 large 206 gb 0 x 15564[c0000000-f73fd000] miss 0 4k 194558 large 31 gb 0 x 194589[c0000000-f73fd000] miss 0 4k 194558 large 31 gb 0 x 194589[c0000000-f73fd000] miss 0 ok. sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_mode_sense sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_device_get sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_setup_blk_pc_cmnd sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_print_result sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_get_sense_info_fld sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol sdev_evt_send_simple sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsicam_bios_param sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_command_normalize_sense sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_test_unit_ready sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_block_when_processing_errors sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_register_driver sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_ioctl sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_nonblockable_ioctl sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_show_sense_hdr sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_device_put sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_logging_level sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_show_result sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_setup_fs_cmnd sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_execute_req sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_mode_select sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_print_sense sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_show_extd_sense sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_prep_return sd_mod: gave up waiting for init of module scsi_mod. sd_mod: Unknown symbol scsi_set_medium_removal FATAL: Error inserting sd_mod (/lib/modules/2.6.27-rc6-mm1/kernel/drivers/scsi/sd_mod.ko): Unknown symbol in module, or unknown parameter (see dmesg) pciehp: PCI Express Hot Plug Controller Driver version: 0.4 FATAL: Could not open '/lib/modules/2.6.27-rc6-mm1/kernel/drivers/net/pcnet32.ko': No such file or directory ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ----------------------------------------
Different messages, but may be something related because loading kernel modules is failing.
Next, I chose CONFIG_FTRACE=n and retried. Using http://I-love.SAKURA.ne.jp/tmp/config-2.6.27-rc6-mm1-3 , I got below output.
---------------------------------------- Linux version 2.6.27-rc6-mm1 (root@tomoyo) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #7 SMP Mon Sep 22 14:45:43 JST 2008 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Cyrix CyrixInstead NSC Geode by NSC Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data) BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) last_pfn = 0x40000 max_arch_pfn = 0x100000 RAMDISK: 3fb48000 - 3fee0000 Allocated new RAMDISK: 0115e000 - 014f6000 Move RAMDISK from 000000003fb48000 - 000000003fedffff to 0115e000 - 014f5fff DMI present. ACPI: RSDP 000F6C60, 0014 (r0 PTLTD ) ACPI: RSDT 3FEFAB5A, 0030 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 3FEFEF06, 0074 (r1 INTEL 440BX 6040000 PTL F4240) ACPI: DSDT 3FEFAB8A, 437C (r1 PTLTD Custom 6040000 MSFT 100000D) ACPI: FACS 3FEFFFC0, 0040 ACPI: APIC 3FEFEF7A, 005E (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 3FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) 140MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 00000000 - 373fe000 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0001147048] TEXT DATA BSS ==> [0000400000 - 0001147048] #4 [0001148000 - 000115e000] INIT_PG_TABLE ==> [0001148000 - 000115e000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [000115e000 - 00014f6000] NEW RAMDISK ==> [000115e000 - 00014f6000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f6cd0] 000f6cd0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x00040000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003fef0 0: 0x0003ff00 -> 0x00040000 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) PERCPU: Allocating 1212416 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255886 Kernel command line: root=/dev/sda1 ro console=ttyS0,115200n8 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1992.963 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 2463 kB per task-struct memory footprint: 1920 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1002516k/1048576k available (2732k kernel code, 45276k reserved, 4114k data, 1460k init, 143304k highmem) virtual kernel memory layout: fixmap : 0xffc58000 - 0xfffff000 (3740 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0ab4000 - 0xc0c21000 (1460 kB) .data : 0xc06ab3e5 - 0xc0aafc1c (4114 kB) .text : 0xc0400000 - 0xc06ab3e5 (2732 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. kmemtrace: early init successful. Calibrating delay loop (skipped), value calculated using timer frequency.. 3985.92 BogoMIPS (lpj=1992963) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. ACPI: Core revision 20080729 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08 lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.12 BogoMIPS (lpj=1995061) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 08 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7976.04 BogoMIPS). khelper used greatest stack depth: 2944 bytes left net_namespace: 912 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2 PCI: Using configuration type 1 for base access ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:505 sysfs_add_one+0x43/0x61() sysfs: duplicate filename 'acpi' can not be created Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.27-rc6-mm1 #7 [<c0432484>] warn_slowpath+0x4b/0x64 [<c045230e>] ? trace_hardirqs_off_caller+0x3e/0xe0 [<c04523bb>] ? trace_hardirqs_off+0xb/0xd [<c0408894>] ? native_sched_clock+0xb8/0xcf [<c04511f4>] ? check_chain_key+0xc0/0x1e4 [<c04b6c61>] ? ifind+0x94/0x9e [<c04544f9>] ? __lock_release+0x4b/0x51 [<c04b6c61>] ? ifind+0x94/0x9e [<c05331ae>] ? _raw_spin_unlock+0x96/0xba [<c04eb874>] ? sysfs_find_dirent+0x20/0x36 [<c04eb58e>] ? __sysfs_add_one+0x22/0xa4 [<c04eb653>] sysfs_add_one+0x43/0x61 [<c04eb942>] create_dir+0x41/0x85 [<c04eb9d8>] sysfs_create_dir+0x3c/0x50 [<c052a49b>] create_dir+0x13/0x33 [<c052a799>] kobject_add_internal+0x117/0x177 [<c052a8e2>] kobject_add_varg+0x36/0x3e [<c052a951>] kobject_init_and_add+0x22/0x27 [<c0ac9a5e>] kernel_param_sysfs_setup+0xa5/0xee [<c0ac9b74>] param_sysfs_builtin+0xcd/0x13c [<c0ac9c2a>] param_sysfs_init+0x47/0x4b [<c0401125>] _stext+0x3d/0x109 [<c0ac9be3>] ? param_sysfs_init+0x0/0x4b [<c042a9f2>] ? wake_up_process+0xf/0x11 [<c0441864>] ? start_workqueue_thread+0x1d/0x20 [<c0441964>] ? __create_workqueue_key+0xfd/0x195 [<c0ab48e8>] do_initcalls+0x89/0xb4 [<c0ab495c>] ? kernel_init+0x0/0x8e [<c0ab4934>] do_basic_setup+0x21/0x23 [<c0ab49af>] kernel_init+0x53/0x8e [<c0404a17>] kernel_thread_helper+0x7/0x10 ======================= ---[ end trace 4eaa2a86a8e2da22 ]--- kobject_add_internal failed for acpi with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1, comm: swapper Tainted: G W 2.6.27-rc6-mm1 #7 [<c052a7e9>] kobject_add_internal+0x167/0x177 [<c052a8e2>] kobject_add_varg+0x36/0x3e [<c052a951>] kobject_init_and_add+0x22/0x27 [<c0ac9a5e>] kernel_param_sysfs_setup+0xa5/0xee [<c0ac9b74>] param_sysfs_builtin+0xcd/0x13c [<c0ac9c2a>] param_sysfs_init+0x47/0x4b [<c0401125>] _stext+0x3d/0x109 [<c0ac9be3>] ? param_sysfs_init+0x0/0x4b [<c042a9f2>] ? wake_up_process+0xf/0x11 [<c0441864>] ? start_workqueue_thread+0x1d/0x20 [<c0441964>] ? __create_workqueue_key+0xfd/0x195 [<c0ab48e8>] do_initcalls+0x89/0xb4 [<c0ab495c>] ? kernel_init+0x0/0x8e [<c0ab4934>] do_basic_setup+0x21/0x23 [<c0ab49af>] kernel_init+0x53/0x8e [<c0404a17>] kernel_thread_helper+0x7/0x10 ======================= Module 'acpi' failed to be added to sysfs, error number -17 The system will be unstable now. ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB pci 0000:00:11.0: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default tracer: 211 pages allocated for 16384 entries of 52 bytes actual entries 16458 system 00:01: ioport range 0x1000-0x103f has been reserved system 00:01: ioport range 0x1040-0x104f has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:11.0: PCI bridge, secondary bus 0000:02 pci 0000:00:11.0: IO window: 0x2000-0x2fff pci 0000:00:11.0: MEM window: disabled pci 0000:00:11.0: PREFETCH window: 0x00000050000000-0x000000500fffff pci 0000:00:11.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [0, 0] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [50000000, 500fffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd debug: unmapping init memory c115e000..c14f6000 pci 0000:00:00.0: Limiting direct PCI/PCI transfers Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1222095151.674:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1678 cryptomgr_test used greatest stack depth: 2932 bytes left alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x0 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01) piix 0000:00:07.1: IDE port disabled piix 0000:00:07.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1058-0x105f hda: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive hda: UDMA/33 mode selected ide0 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-floppy driver 1.00 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 kmemtrace: fully up. input: ImPS/2 Generic Wheel Mouse as /class/input/input1 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3680KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done. VFS: Mounted root (cramfs filesystem) readonly. mount used greatest stack depth: 2420 bytes left linuxrc used greatest stack depth: 2068 bytes left debug: unmapping init memory c0ab4000..c0c21000 Write protecting the kernel text: 2736k Testing CPA: Reverting c0400000-c06ac000 Testing CPA: write protecting again Write protecting the kernel read-only data: 2168k Testing CPA: undo c06ac000-c08ca000 Testing CPA: write protecting again initrd-tools: 0.1.81.1 mount: unknown filesystem type 'devfs' PANIC: double fault, gdt at c2d09000 [255 bytes] double fault, tss at c2e2c080 eip = c06a9026, esp = f44f9f64 eax = f44f8dc0, ebx = 00000000, ecx = c090ad44, edx = 00000001 esi = c041eea9, edi = f53749f0 ----------------------------------------
So, I haven't succeeded to boot...
I'm using Debian Sarge (i386) on VMware.
| |