lkml.org 
[lkml]   [2008]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] x86: rename discontig_32.c to numa_32.c
Date
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 69774ca..f4edb6e 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -15,12 +15,8 @@ obj-$(CONFIG_MMIOTRACE) += mmiotrace.o
mmiotrace-y := pf_in.o mmio-mod.o
obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o

-ifeq ($(CONFIG_X86_32),y)
-obj-$(CONFIG_NUMA) += discontig_32.o
-else
-obj-$(CONFIG_NUMA) += numa_64.o
+obj-$(CONFIG_NUMA) += numa_$(BITS).o
obj-$(CONFIG_K8_NUMA) += k8topology_64.o
-endif
obj-$(CONFIG_ACPI_NUMA) += srat_$(BITS).o

obj-$(CONFIG_MEMTEST) += memtest.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
deleted file mode 100644
index 847c164..0000000
--- a/arch/x86/mm/discontig_32.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * Written by: Patricia Gaughen <gone@us.ibm.com>, IBM Corporation
- * August 2002: added remote node KVA remap - Martin J. Bligh
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/mmzone.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/nodemask.h>
-#include <linux/module.h>
-#include <linux/kexec.h>
-#include <linux/pfn.h>
-#include <linux/swap.h>
-#include <linux/acpi.h>
-
-#include <asm/e820.h>
-#include <asm/setup.h>
-#include <asm/mmzone.h>
-#include <asm/bios_ebda.h>
-#include <asm/proto.h>
-
-struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-
-/*
- * numa interface - we expect the numa architecture specific code to have
- * populated the following initialisation.
- *
- * 1) node_online_map - the map of all nodes configured (online) in the system
- * 2) node_start_pfn - the starting page frame number for a node
- * 3) node_end_pfn - the ending page fram number for a node
- */
-unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
-unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
-
-
-#ifdef CONFIG_DISCONTIGMEM
-/*
- * 4) physnode_map - the mapping between a pfn and owning node
- * physnode_map keeps track of the physical memory layout of a generic
- * numa node on a 64Mb break (each element of the array will
- * represent 64Mb of memory and will be marked by the node id. so,
- * if the first gig is on node 0, and the second gig is on node 1
- * physnode_map will contain:
- *
- * physnode_map[0-15] = 0;
- * physnode_map[16-31] = 1;
- * physnode_map[32- ] = -1;
- */
-s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
-EXPORT_SYMBOL(physnode_map);
-
-void memory_present(int nid, unsigned long start, unsigned long end)
-{
- unsigned long pfn;
-
- printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
- nid, start, end);
- printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
- printk(KERN_DEBUG " ");
- for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
- physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
- printk(KERN_CONT "%lx ", pfn);
- }
- printk(KERN_CONT "\n");
-}
-
-unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
- unsigned long end_pfn)
-{
- unsigned long nr_pages = end_pfn - start_pfn;
-
- if (!nr_pages)
- return 0;
-
- return (nr_pages + 1) * sizeof(struct page);
-}
-#endif
-
-extern unsigned long find_max_low_pfn(void);
-extern unsigned long highend_pfn, highstart_pfn;
-
-#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
-
-unsigned long node_remap_size[MAX_NUMNODES];
-static void *node_remap_start_vaddr[MAX_NUMNODES];
-void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
-
-static unsigned long kva_start_pfn;
-static unsigned long kva_pages;
-/*
- * FLAT - support for basic PC memory model with discontig enabled, essentially
- * a single node with all available processors in it with a flat
- * memory map.
- */
-int __init get_memcfg_numa_flat(void)
-{
- printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
-
- node_start_pfn[0] = 0;
- node_end_pfn[0] = max_pfn;
- e820_register_active_regions(0, 0, max_pfn);
- memory_present(0, 0, max_pfn);
- node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
-
- /* Indicate there is one node available. */
- nodes_clear(node_online_map);
- node_set_online(0);
- return 1;
-}
-
-/*
- * Find the highest page frame number we have available for the node
- */
-static void __init propagate_e820_map_node(int nid)
-{
- if (node_end_pfn[nid] > max_pfn)
- node_end_pfn[nid] = max_pfn;
- /*
- * if a user has given mem=XXXX, then we need to make sure
- * that the node _starts_ before that, too, not just ends
- */
- if (node_start_pfn[nid] > max_pfn)
- node_start_pfn[nid] = max_pfn;
- BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
-}
-
-/*
- * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
- * method. For node zero take this from the bottom of memory, for
- * subsequent nodes place them at node_remap_start_vaddr which contains
- * node local data in physically node local memory. See setup_memory()
- * for details.
- */
-static void __init allocate_pgdat(int nid)
-{
- char buf[16];
-
- if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
- NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
- else {
- unsigned long pgdat_phys;
- pgdat_phys = find_e820_area(min_low_pfn<<PAGE_SHIFT,
- max_pfn_mapped<<PAGE_SHIFT,
- sizeof(pg_data_t),
- PAGE_SIZE);
- NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
- memset(buf, 0, sizeof(buf));
- sprintf(buf, "NODE_DATA %d", nid);
- reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
- }
- printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
- nid, (unsigned long)NODE_DATA(nid));
-}
-
-/*
- * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
- * virtual address space (KVA) is reserved and portions of nodes are mapped
- * using it. This is to allow node-local memory to be allocated for
- * structures that would normally require ZONE_NORMAL. The memory is
- * allocated with alloc_remap() and callers should be prepared to allocate
- * from the bootmem allocator instead.
- */
-static unsigned long node_remap_start_pfn[MAX_NUMNODES];
-static void *node_remap_end_vaddr[MAX_NUMNODES];
-static void *node_remap_alloc_vaddr[MAX_NUMNODES];
-static unsigned long node_remap_offset[MAX_NUMNODES];
-
-void *alloc_remap(int nid, unsigned long size)
-{
- void *allocation = node_remap_alloc_vaddr[nid];
-
- size = ALIGN(size, L1_CACHE_BYTES);
-
- if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
- return 0;
-
- node_remap_alloc_vaddr[nid] += size;
- memset(allocation, 0, size);
-
- return allocation;
-}
-
-static void __init remap_numa_kva(void)
-{
- void *vaddr;
- unsigned long pfn;
- int node;
-
- for_each_online_node(node) {
- printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
- for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
- vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
- printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
- (unsigned long)vaddr,
- node_remap_start_pfn[node] + pfn);
- set_pmd_pfn((ulong) vaddr,
- node_remap_start_pfn[node] + pfn,
- PAGE_KERNEL_LARGE);
- }
- }
-}
-
-static unsigned long calculate_numa_remap_pages(void)
-{
- int nid;
- unsigned long size, reserve_pages = 0;
-
- for_each_online_node(nid) {
- u64 node_kva_target;
- u64 node_kva_final;
-
- /*
- * The acpi/srat node info can show hot-add memroy zones
- * where memory could be added but not currently present.
- */
- printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
- nid, node_start_pfn[nid], node_end_pfn[nid]);
- if (node_start_pfn[nid] > max_pfn)
- continue;
- if (!node_end_pfn[nid])
- continue;
- if (node_end_pfn[nid] > max_pfn)
- node_end_pfn[nid] = max_pfn;
-
- /* ensure the remap includes space for the pgdat. */
- size = node_remap_size[nid] + sizeof(pg_data_t);
-
- /* convert size to large (pmd size) pages, rounding up */
- size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
- /* now the roundup is correct, convert to PAGE_SIZE pages */
- size = size * PTRS_PER_PTE;
-
- node_kva_target = round_down(node_end_pfn[nid] - size,
- PTRS_PER_PTE);
- node_kva_target <<= PAGE_SHIFT;
- do {
- node_kva_final = find_e820_area(node_kva_target,
- ((u64)node_end_pfn[nid])<<PAGE_SHIFT,
- ((u64)size)<<PAGE_SHIFT,
- LARGE_PAGE_BYTES);
- node_kva_target -= LARGE_PAGE_BYTES;
- } while (node_kva_final == -1ULL &&
- (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
-
- if (node_kva_final == -1ULL)
- panic("Can not get kva ram\n");
-
- node_remap_size[nid] = size;
- node_remap_offset[nid] = reserve_pages;
- reserve_pages += size;
- printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
- " node %d at %llx\n",
- size, nid, node_kva_final>>PAGE_SHIFT);
-
- /*
- * prevent kva address below max_low_pfn want it on system
- * with less memory later.
- * layout will be: KVA address , KVA RAM
- *
- * we are supposed to only record the one less then max_low_pfn
- * but we could have some hole in high memory, and it will only
- * check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
- * to use it as free.
- * So reserve_early here, hope we don't run out of that array
- */
- reserve_early(node_kva_final,
- node_kva_final+(((u64)size)<<PAGE_SHIFT),
- "KVA RAM");
-
- node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
- remove_active_range(nid, node_remap_start_pfn[nid],
- node_remap_start_pfn[nid] + size);
- }
- printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
- reserve_pages);
- return reserve_pages;
-}
-
-static void init_remap_allocator(int nid)
-{
- node_remap_start_vaddr[nid] = pfn_to_kaddr(
- kva_start_pfn + node_remap_offset[nid]);
- node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
- (node_remap_size[nid] * PAGE_SIZE);
- node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
- ALIGN(sizeof(pg_data_t), PAGE_SIZE);
-
- printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
- (ulong) node_remap_start_vaddr[nid],
- (ulong) node_remap_end_vaddr[nid]);
-}
-
-void __init initmem_init(unsigned long start_pfn,
- unsigned long end_pfn)
-{
- int nid;
- long kva_target_pfn;
-
- /*
- * When mapping a NUMA machine we allocate the node_mem_map arrays
- * from node local memory. They are then mapped directly into KVA
- * between zone normal and vmalloc space. Calculate the size of
- * this space and use it to adjust the boundary between ZONE_NORMAL
- * and ZONE_HIGHMEM.
- */
-
- get_memcfg_numa();
-
- kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE);
-
- kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
- do {
- kva_start_pfn = find_e820_area(kva_target_pfn<<PAGE_SHIFT,
- max_low_pfn<<PAGE_SHIFT,
- kva_pages<<PAGE_SHIFT,
- PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
- kva_target_pfn -= PTRS_PER_PTE;
- } while (kva_start_pfn == -1UL && kva_target_pfn > min_low_pfn);
-
- if (kva_start_pfn == -1UL)
- panic("Can not get kva space\n");
-
- printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
- kva_start_pfn, max_low_pfn);
- printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
-
- /* avoid clash with initrd */
- reserve_early(kva_start_pfn<<PAGE_SHIFT,
- (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
- "KVA PG");
-#ifdef CONFIG_HIGHMEM
- highstart_pfn = highend_pfn = max_pfn;
- if (max_pfn > max_low_pfn)
- highstart_pfn = max_low_pfn;
- printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
- pages_to_mb(highend_pfn - highstart_pfn));
- num_physpages = highend_pfn;
- high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
-#else
- num_physpages = max_low_pfn;
- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
-#endif
- printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
- pages_to_mb(max_low_pfn));
- printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n",
- max_low_pfn, highstart_pfn);
-
- printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
- (ulong) pfn_to_kaddr(max_low_pfn));
- for_each_online_node(nid) {
- init_remap_allocator(nid);
-
- allocate_pgdat(nid);
- }
- remap_numa_kva();
-
- printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
- (ulong) pfn_to_kaddr(highstart_pfn));
- for_each_online_node(nid)
- propagate_e820_map_node(nid);
-
- for_each_online_node(nid)
- memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-
- NODE_DATA(0)->bdata = &bootmem_node_data[0];
- setup_bootmem_allocator();
-}
-
-void __init set_highmem_pages_init(void)
-{
-#ifdef CONFIG_HIGHMEM
- struct zone *zone;
- int nid;
-
- for_each_zone(zone) {
- unsigned long zone_start_pfn, zone_end_pfn;
-
- if (!is_highmem(zone))
- continue;
-
- zone_start_pfn = zone->zone_start_pfn;
- zone_end_pfn = zone_start_pfn + zone->spanned_pages;
-
- nid = zone_to_nid(zone);
- printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
- zone->name, nid, zone_start_pfn, zone_end_pfn);
-
- add_highpages_with_active_regions(nid, zone_start_pfn,
- zone_end_pfn);
- }
- totalram_pages += totalhigh_pages;
-#endif
-}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-static int paddr_to_nid(u64 addr)
-{
- int nid;
- unsigned long pfn = PFN_DOWN(addr);
-
- for_each_node(nid)
- if (node_start_pfn[nid] <= pfn &&
- pfn < node_end_pfn[nid])
- return nid;
-
- return -1;
-}
-
-/*
- * This function is used to ask node id BEFORE memmap and mem_section's
- * initialization (pfn_to_nid() can't be used yet).
- * If _PXM is not defined on ACPI's DSDT, node id must be found by this.
- */
-int memory_add_physaddr_to_nid(u64 addr)
-{
- int nid = paddr_to_nid(addr);
- return (nid >= 0) ? nid : 0;
-}
-
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
-
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
new file mode 100644
index 0000000..847c164
--- /dev/null
+++ b/arch/x86/mm/numa_32.c
@@ -0,0 +1,444 @@
+/*
+ * Written by: Patricia Gaughen <gone@us.ibm.com>, IBM Corporation
+ * August 2002: added remote node KVA remap - Martin J. Bligh
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/highmem.h>
+#include <linux/initrd.h>
+#include <linux/nodemask.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+#include <linux/acpi.h>
+
+#include <asm/e820.h>
+#include <asm/setup.h>
+#include <asm/mmzone.h>
+#include <asm/bios_ebda.h>
+#include <asm/proto.h>
+
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+
+/*
+ * numa interface - we expect the numa architecture specific code to have
+ * populated the following initialisation.
+ *
+ * 1) node_online_map - the map of all nodes configured (online) in the system
+ * 2) node_start_pfn - the starting page frame number for a node
+ * 3) node_end_pfn - the ending page fram number for a node
+ */
+unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
+unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
+
+
+#ifdef CONFIG_DISCONTIGMEM
+/*
+ * 4) physnode_map - the mapping between a pfn and owning node
+ * physnode_map keeps track of the physical memory layout of a generic
+ * numa node on a 64Mb break (each element of the array will
+ * represent 64Mb of memory and will be marked by the node id. so,
+ * if the first gig is on node 0, and the second gig is on node 1
+ * physnode_map will contain:
+ *
+ * physnode_map[0-15] = 0;
+ * physnode_map[16-31] = 1;
+ * physnode_map[32- ] = -1;
+ */
+s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
+EXPORT_SYMBOL(physnode_map);
+
+void memory_present(int nid, unsigned long start, unsigned long end)
+{
+ unsigned long pfn;
+
+ printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
+ nid, start, end);
+ printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
+ printk(KERN_DEBUG " ");
+ for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
+ physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
+ printk(KERN_CONT "%lx ", pfn);
+ }
+ printk(KERN_CONT "\n");
+}
+
+unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ unsigned long nr_pages = end_pfn - start_pfn;
+
+ if (!nr_pages)
+ return 0;
+
+ return (nr_pages + 1) * sizeof(struct page);
+}
+#endif
+
+extern unsigned long find_max_low_pfn(void);
+extern unsigned long highend_pfn, highstart_pfn;
+
+#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
+
+unsigned long node_remap_size[MAX_NUMNODES];
+static void *node_remap_start_vaddr[MAX_NUMNODES];
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
+
+static unsigned long kva_start_pfn;
+static unsigned long kva_pages;
+/*
+ * FLAT - support for basic PC memory model with discontig enabled, essentially
+ * a single node with all available processors in it with a flat
+ * memory map.
+ */
+int __init get_memcfg_numa_flat(void)
+{
+ printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
+
+ node_start_pfn[0] = 0;
+ node_end_pfn[0] = max_pfn;
+ e820_register_active_regions(0, 0, max_pfn);
+ memory_present(0, 0, max_pfn);
+ node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
+
+ /* Indicate there is one node available. */
+ nodes_clear(node_online_map);
+ node_set_online(0);
+ return 1;
+}
+
+/*
+ * Find the highest page frame number we have available for the node
+ */
+static void __init propagate_e820_map_node(int nid)
+{
+ if (node_end_pfn[nid] > max_pfn)
+ node_end_pfn[nid] = max_pfn;
+ /*
+ * if a user has given mem=XXXX, then we need to make sure
+ * that the node _starts_ before that, too, not just ends
+ */
+ if (node_start_pfn[nid] > max_pfn)
+ node_start_pfn[nid] = max_pfn;
+ BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
+}
+
+/*
+ * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
+ * method. For node zero take this from the bottom of memory, for
+ * subsequent nodes place them at node_remap_start_vaddr which contains
+ * node local data in physically node local memory. See setup_memory()
+ * for details.
+ */
+static void __init allocate_pgdat(int nid)
+{
+ char buf[16];
+
+ if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
+ NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
+ else {
+ unsigned long pgdat_phys;
+ pgdat_phys = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+ max_pfn_mapped<<PAGE_SHIFT,
+ sizeof(pg_data_t),
+ PAGE_SIZE);
+ NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
+ memset(buf, 0, sizeof(buf));
+ sprintf(buf, "NODE_DATA %d", nid);
+ reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
+ }
+ printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
+ nid, (unsigned long)NODE_DATA(nid));
+}
+
+/*
+ * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
+ * virtual address space (KVA) is reserved and portions of nodes are mapped
+ * using it. This is to allow node-local memory to be allocated for
+ * structures that would normally require ZONE_NORMAL. The memory is
+ * allocated with alloc_remap() and callers should be prepared to allocate
+ * from the bootmem allocator instead.
+ */
+static unsigned long node_remap_start_pfn[MAX_NUMNODES];
+static void *node_remap_end_vaddr[MAX_NUMNODES];
+static void *node_remap_alloc_vaddr[MAX_NUMNODES];
+static unsigned long node_remap_offset[MAX_NUMNODES];
+
+void *alloc_remap(int nid, unsigned long size)
+{
+ void *allocation = node_remap_alloc_vaddr[nid];
+
+ size = ALIGN(size, L1_CACHE_BYTES);
+
+ if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
+ return 0;
+
+ node_remap_alloc_vaddr[nid] += size;
+ memset(allocation, 0, size);
+
+ return allocation;
+}
+
+static void __init remap_numa_kva(void)
+{
+ void *vaddr;
+ unsigned long pfn;
+ int node;
+
+ for_each_online_node(node) {
+ printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
+ for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
+ vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
+ printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
+ (unsigned long)vaddr,
+ node_remap_start_pfn[node] + pfn);
+ set_pmd_pfn((ulong) vaddr,
+ node_remap_start_pfn[node] + pfn,
+ PAGE_KERNEL_LARGE);
+ }
+ }
+}
+
+static unsigned long calculate_numa_remap_pages(void)
+{
+ int nid;
+ unsigned long size, reserve_pages = 0;
+
+ for_each_online_node(nid) {
+ u64 node_kva_target;
+ u64 node_kva_final;
+
+ /*
+ * The acpi/srat node info can show hot-add memroy zones
+ * where memory could be added but not currently present.
+ */
+ printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
+ nid, node_start_pfn[nid], node_end_pfn[nid]);
+ if (node_start_pfn[nid] > max_pfn)
+ continue;
+ if (!node_end_pfn[nid])
+ continue;
+ if (node_end_pfn[nid] > max_pfn)
+ node_end_pfn[nid] = max_pfn;
+
+ /* ensure the remap includes space for the pgdat. */
+ size = node_remap_size[nid] + sizeof(pg_data_t);
+
+ /* convert size to large (pmd size) pages, rounding up */
+ size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
+ /* now the roundup is correct, convert to PAGE_SIZE pages */
+ size = size * PTRS_PER_PTE;
+
+ node_kva_target = round_down(node_end_pfn[nid] - size,
+ PTRS_PER_PTE);
+ node_kva_target <<= PAGE_SHIFT;
+ do {
+ node_kva_final = find_e820_area(node_kva_target,
+ ((u64)node_end_pfn[nid])<<PAGE_SHIFT,
+ ((u64)size)<<PAGE_SHIFT,
+ LARGE_PAGE_BYTES);
+ node_kva_target -= LARGE_PAGE_BYTES;
+ } while (node_kva_final == -1ULL &&
+ (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
+
+ if (node_kva_final == -1ULL)
+ panic("Can not get kva ram\n");
+
+ node_remap_size[nid] = size;
+ node_remap_offset[nid] = reserve_pages;
+ reserve_pages += size;
+ printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
+ " node %d at %llx\n",
+ size, nid, node_kva_final>>PAGE_SHIFT);
+
+ /*
+ * prevent kva address below max_low_pfn want it on system
+ * with less memory later.
+ * layout will be: KVA address , KVA RAM
+ *
+ * we are supposed to only record the one less then max_low_pfn
+ * but we could have some hole in high memory, and it will only
+ * check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
+ * to use it as free.
+ * So reserve_early here, hope we don't run out of that array
+ */
+ reserve_early(node_kva_final,
+ node_kva_final+(((u64)size)<<PAGE_SHIFT),
+ "KVA RAM");
+
+ node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
+ remove_active_range(nid, node_remap_start_pfn[nid],
+ node_remap_start_pfn[nid] + size);
+ }
+ printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
+ reserve_pages);
+ return reserve_pages;
+}
+
+static void init_remap_allocator(int nid)
+{
+ node_remap_start_vaddr[nid] = pfn_to_kaddr(
+ kva_start_pfn + node_remap_offset[nid]);
+ node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
+ (node_remap_size[nid] * PAGE_SIZE);
+ node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
+ ALIGN(sizeof(pg_data_t), PAGE_SIZE);
+
+ printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
+ (ulong) node_remap_start_vaddr[nid],
+ (ulong) node_remap_end_vaddr[nid]);
+}
+
+void __init initmem_init(unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ int nid;
+ long kva_target_pfn;
+
+ /*
+ * When mapping a NUMA machine we allocate the node_mem_map arrays
+ * from node local memory. They are then mapped directly into KVA
+ * between zone normal and vmalloc space. Calculate the size of
+ * this space and use it to adjust the boundary between ZONE_NORMAL
+ * and ZONE_HIGHMEM.
+ */
+
+ get_memcfg_numa();
+
+ kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE);
+
+ kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
+ do {
+ kva_start_pfn = find_e820_area(kva_target_pfn<<PAGE_SHIFT,
+ max_low_pfn<<PAGE_SHIFT,
+ kva_pages<<PAGE_SHIFT,
+ PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
+ kva_target_pfn -= PTRS_PER_PTE;
+ } while (kva_start_pfn == -1UL && kva_target_pfn > min_low_pfn);
+
+ if (kva_start_pfn == -1UL)
+ panic("Can not get kva space\n");
+
+ printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
+ kva_start_pfn, max_low_pfn);
+ printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
+
+ /* avoid clash with initrd */
+ reserve_early(kva_start_pfn<<PAGE_SHIFT,
+ (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
+ "KVA PG");
+#ifdef CONFIG_HIGHMEM
+ highstart_pfn = highend_pfn = max_pfn;
+ if (max_pfn > max_low_pfn)
+ highstart_pfn = max_low_pfn;
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+ pages_to_mb(highend_pfn - highstart_pfn));
+ num_physpages = highend_pfn;
+ high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+ num_physpages = max_low_pfn;
+ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
+#endif
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+ pages_to_mb(max_low_pfn));
+ printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n",
+ max_low_pfn, highstart_pfn);
+
+ printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
+ (ulong) pfn_to_kaddr(max_low_pfn));
+ for_each_online_node(nid) {
+ init_remap_allocator(nid);
+
+ allocate_pgdat(nid);
+ }
+ remap_numa_kva();
+
+ printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
+ (ulong) pfn_to_kaddr(highstart_pfn));
+ for_each_online_node(nid)
+ propagate_e820_map_node(nid);
+
+ for_each_online_node(nid)
+ memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+ NODE_DATA(0)->bdata = &bootmem_node_data[0];
+ setup_bootmem_allocator();
+}
+
+void __init set_highmem_pages_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+ struct zone *zone;
+ int nid;
+
+ for_each_zone(zone) {
+ unsigned long zone_start_pfn, zone_end_pfn;
+
+ if (!is_highmem(zone))
+ continue;
+
+ zone_start_pfn = zone->zone_start_pfn;
+ zone_end_pfn = zone_start_pfn + zone->spanned_pages;
+
+ nid = zone_to_nid(zone);
+ printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
+ zone->name, nid, zone_start_pfn, zone_end_pfn);
+
+ add_highpages_with_active_regions(nid, zone_start_pfn,
+ zone_end_pfn);
+ }
+ totalram_pages += totalhigh_pages;
+#endif
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int paddr_to_nid(u64 addr)
+{
+ int nid;
+ unsigned long pfn = PFN_DOWN(addr);
+
+ for_each_node(nid)
+ if (node_start_pfn[nid] <= pfn &&
+ pfn < node_end_pfn[nid])
+ return nid;
+
+ return -1;
+}
+
+/*
+ * This function is used to ask node id BEFORE memmap and mem_section's
+ * initialization (pfn_to_nid() can't be used yet).
+ * If _PXM is not defined on ACPI's DSDT, node id must be found by this.
+ */
+int memory_add_physaddr_to_nid(u64 addr)
+{
+ int nid = paddr_to_nid(addr);
+ return (nid >= 0) ? nid : 0;
+}
+
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
+

\
 
 \ /
  Last update: 2008-09-10 08:37    [W:0.045 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site