lkml.org 
[lkml]   [2008]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Kconfig cleanup including spelling and grammar touchups.
On Sun, 31 Aug 2008 21:24:45 -0700
Randy Dunlap <randy.dunlap@oracle.com> wrote:

>
>
> Ack for the others.
>
> ---
> ~Randy
> Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA
> http://linuxplumbersconf.org/

+fixes for randy

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
---
arch/arm/mach-omap1/Kconfig | 2 +-
arch/arm/mach-pxa/Kconfig | 2 +-
arch/blackfin/Kconfig | 6 +++---
arch/cris/Kconfig | 6 +++---
arch/cris/arch-v32/Kconfig | 2 +-
arch/cris/arch-v32/drivers/Kconfig | 2 +-
arch/cris/arch-v32/mach-fs/Kconfig | 2 +-
arch/mips/Kconfig | 2 +-
arch/powerpc/Kconfig | 2 +-
arch/powerpc/platforms/Kconfig | 2 +-
arch/powerpc/sysdev/bestcomm/Kconfig | 4 ++--
arch/sh/Kconfig | 4 ++--
arch/x86/Kconfig | 4 ++--
drivers/ata/Kconfig | 2 +-
drivers/base/Kconfig | 2 +-
drivers/gpio/Kconfig | 6 +++---
drivers/hwmon/Kconfig | 2 +-
drivers/i2c/chips/Kconfig | 4 ++--
drivers/input/Kconfig | 2 +-
drivers/leds/Kconfig | 6 +++---
drivers/media/dvb/frontends/Kconfig | 2 +-
drivers/misc/Kconfig | 8 ++++----
drivers/mmc/host/Kconfig | 2 +-
drivers/serial/Kconfig | 2 +-
drivers/usb/core/Kconfig | 2 +-
drivers/usb/serial/Kconfig | 4 ++--
fs/Kconfig | 2 +-
init/Kconfig | 4 ++--
net/Kconfig | 2 +-
net/ipv6/Kconfig | 18 +++++++++---------
net/mac80211/Kconfig | 2 +-
net/netfilter/Kconfig | 2 +-
32 files changed, 57 insertions(+), 57 deletions(-)

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 79f0b1f..eb46445 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -95,7 +95,7 @@ config MACH_OMAP_PALMZ71
help
Support for the Palm Zire71 PDA. To boot the kernel,
you'll need a PalmOS compatible bootloader; check out
- http://hackndev.com/palm/z71 for more informations.
+ http://hackndev.com/palm/z71 for more information.
Say Y here if you have such a PDA, say N otherwise.

config MACH_OMAP_PALMTT
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e8ee7ec..1faf87c 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,7 +27,7 @@ config ARCH_GUMSTIX
bool "Gumstix XScale boards"
help
Say Y here if you intend to run this kernel on a
- Gumstix Full Function Minature Computer.
+ Gumstix Full Function Miniature Computer.

config MACH_GUMSTIX_F
bool "Basix, Connex, ws-200ax, ws-400ax systems"
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 4154ff1..85ac43a 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -603,7 +603,7 @@ config CACHELINE_ALIGNED_L1
default n if BF54x
depends on !BF531
help
- If enabled, cacheline_anligned data is linked
+ If enabled, cacheline_aligned data is linked
into L1 data memory. (less latency)

config SYSCALL_TAB_L1
@@ -763,7 +763,7 @@ config MPU
memory they do not own. This comes at a performance penalty
and is recommended only for debugging.

-comment "Asynchonous Memory Configuration"
+comment "Asynchronous Memory Configuration"

menu "EBIU_AMGCTL Global Control"
config C_AMCKEN
@@ -795,7 +795,7 @@ config C_B3PEN
default n

choice
- prompt"Enable Asynchonous Memory Banks"
+ prompt "Enable Asynchronous Memory Banks"
default C_AMBEN_ALL

config C_AMBEN
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 9389d38..9713196 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -436,7 +436,7 @@ config ETRAX_SERIAL_PORT0_DMA1_IN
help
Enables the DMA1 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.

@@ -563,7 +563,7 @@ config ETRAX_SERIAL_PORT2_DMA7_IN
help
Enables the DMA7 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.

@@ -602,7 +602,7 @@ config ETRAX_SERIAL_PORT3_DMA3_IN
help
Enables the DMA3 input channel for ser3 (ttyS3).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.

diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 005ed2b..21bbd93 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -28,7 +28,7 @@ config ETRAX_NBR_LED_GRP_ONE
help
Select this if you want one Ethernet LED group. This LED group
can be used for one or more Ethernet interfaces. However, it is
- recomended that each Ethernet interface use a dedicated LED group.
+ recommended that each Ethernet interface use a dedicated LED group.

config ETRAX_NBR_LED_GRP_TWO
bool "Use two LED groups"
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 7a64fce..b9e328e 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -342,7 +342,7 @@ config ETRAX_SERIAL_PORT4_DMA9_IN
help
Enables the DMA9 input channel for ser4 (ttyS4).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.

diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig
index f6d7447..774de82 100644
--- a/arch/cris/arch-v32/mach-fs/Kconfig
+++ b/arch/cris/arch-v32/mach-fs/Kconfig
@@ -59,7 +59,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
depends on ETRAX_ARCH_V32
default "0"
help
- SDRAM configuration for group 1. The defult value is 0
+ SDRAM configuration for group 1. The default value is 0
because group 1 is not used in the default configuration,
described in the help for SDRAM_GRP0_CONFIG.

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4da736e..86688ae 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -135,7 +135,7 @@ config MACH_JAZZ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
- Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
Olivetti M700-10 workstations.

config LASAT
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 587da5e..02c705d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -335,7 +335,7 @@ config PHYP_DUMP
help
Hypervisor-assisted dump is meant to be a kdump replacement
offering robustness and speed not possible without system
- hypervisor assistence.
+ hypervisor assistance.

If unsure, say "N"

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 4c900ef..c5a1c0f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -288,7 +288,7 @@ config CPM
config OF_RTC
bool
help
- Uses information from the OF or flattened device tree to instatiate
+ Uses information from the OF or flattened device tree to instantiate
platform devices for direct mapped RTC chips like the DS1742 or DS1743.

source "arch/powerpc/sysdev/bestcomm/Kconfig"
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 57cc565..0254862 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -9,8 +9,8 @@ config PPC_BESTCOMM
select PPC_LIB_RHEAP
help
BestComm is the name of the communication coprocessor found
- on the Freescale MPC5200 family of processor. It's usage is
- optionnal for some drivers (like ATA), but required for
+ on the Freescale MPC5200 family of processor. Its usage is
+ optional for some drivers (like ATA), but required for
others (like FEC).

If you want to use drivers that require DMA operations,
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5131d50..e6d796a 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -562,10 +562,10 @@ config GUSA_RB
depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
help
Enabling this option will allow the kernel to implement some
- atomic operations using a software implemention of load-locked/
+ atomic operations using a software implementation of load-locked/
store-conditional (LLSC). On machines which do not have hardware
LLSC, this should be more efficient than the other alternative of
- disabling insterrupts around the atomic sequence.
+ disabling interrupts around the atomic sequence.

endmenu

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ed92864..d8266c7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1000,7 +1000,7 @@ config NODES_SHIFT
depends on NEED_MULTIPLE_NODES
help
Specify the maximum number of NUMA Nodes available on the target
- system. Increases memory reserved to accomodate various tables.
+ system. Increases memory reserved to accommodate various tables.

config HAVE_ARCH_BOOTMEM_NODE
def_bool y
@@ -1128,7 +1128,7 @@ config MTRR_SANITIZER
add writeback entries.

Can be disabled with disable_mtrr_cleanup on the kernel command line.
- The largest mtrr entry size for a continous block can be set with
+ The largest mtrr entry size for a continuous block can be set with
mtrr_chunk_size.

If unsure, say N.
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae84949..062e469 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -87,7 +87,7 @@ config ATA_SFF

For users with exclusively modern controllers like AHCI,
Silicon Image 3124, or Marvell 6440, you may choose to
- disable this uneeded SFF support.
+ disable this unneeded SFF support.

If unsure, say Y.

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 6318f6b..8f006f9 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -54,7 +54,7 @@ config FIRMWARE_IN_KERNEL
such firmware, and do not wish to use an initrd.

This single option controls the inclusion of firmware for
- every driver which usees request_firmare() and ships its
+ every driver which uses request_firmware() and ships its
firmware in the kernel source tree, to avoid a proliferation
of 'Include firmware for xxx device' options.

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index dbd42d6..4819545 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -42,9 +42,9 @@ config DEBUG_GPIO
depends on DEBUG_KERNEL
help
Say Y here to add some extra checks and diagnostics to GPIO calls.
- The checks help ensure that GPIOs have been properly initialized
- before they are used and that sleeping calls aren not made from
- nonsleeping contexts. They can make bitbanged serial protocols
+ These checks help ensure that GPIOs have been properly initialized
+ before they are used, and that sleeping calls are not made from
+ non-sleeping contexts. They can make bitbanged serial protocols
slower. The diagnostics help catch the type of setup errors
that are most common when setting up new platforms or boards.

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d402e8d..7616f32 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -321,7 +321,7 @@ config SENSORS_FSCHMD
Computers sensor chips.

This is a new merged driver for FSC sensor chips which is intended
- as a replacment for the fscpos, fscscy and fscher drivers and adds
+ as a replacement for the fscpos, fscscy, and fscher drivers, and adds
support for several other FCS sensor chips.

This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index a95cb94..bf92f3e 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -167,8 +167,8 @@ config MENELAUS
depends on I2C=y && ARCH_OMAP24XX
help
If you say yes here you get support for the Texas Instruments
- TWL92330/Menelaus Power Management chip. This include voltage
- regulators, Dual slot memory card tranceivers, real-time clock
+ TWL92330/Menelaus Power Management chip. This includes voltage
+ regulators, dual slot memory card transceivers, real-time clock,
and other features that are often used in portable devices like
cell phones and PDAs.

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 5f9d860..cd50c00 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -143,7 +143,7 @@ config INPUT_APMPOWER
---help---
Say Y here if you want suspend key events to trigger a user
requested suspend through APM. This is useful on embedded
- systems where such behviour is desired without userspace
+ systems where such behaviour is desired without userspace
interaction. If unsure, say N.

To compile this driver as a module, choose M here: the
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9556262..b2eedfa 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -100,7 +100,7 @@ config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
depends on LEDS_CLASS && SH_HP6XX
help
- This option enables led support for the handheld
+ This option enables LED support for the handheld
HP Jornada 620/660/680/690.

config LEDS_PCA9532
@@ -108,7 +108,7 @@ config LEDS_PCA9532
depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
- led controller. It is generally only usefull
+ LED controller. It is generally only useful
as a platform driver

config LEDS_GPIO
@@ -150,7 +150,7 @@ config LEDS_CLEVO_MAIL
Positivo Mobile (Clevo M5x0V)

If your model is not listed here you can try the "nodetect"
- module paramter.
+ module parameter.

To compile this driver as a module, choose M here: the
module will be called leds-clevo-mail.
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 7dbb4a2..9b1f774 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -358,7 +358,7 @@ config DVB_TUNER_DIB0070
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon baseband tuner DiB0070 from DiBcom.
- This device is only used inside a SiP called togther with a
+ This device is only used inside a SiP called together with a
demodulator for now.

comment "SEC control devices for DVB-S"
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a726f3b..5fe2a35 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -18,8 +18,8 @@ config ATMEL_PWM
depends on AVR32 || ARCH_AT91
help
This option enables device driver support for the PWM channels
- on certain Atmel prcoessors. Pulse Width Modulation is used for
- purposes including software controlled power-efficent backlights
+ on certain Atmel processors. Pulse Width Modulation is used for
+ purposes including software controlled power-efficient backlights
on LCD displays, motor control, and waveform generation.

config ATMEL_TCLIB
@@ -364,7 +364,7 @@ config THINKPAD_ACPI_HOTKEY_POLL
depends on THINKPAD_ACPI
default y
---help---
- Some thinkpad models benefit from NVRAM polling to detect a few of
+ Some ThinkPad models benefit from NVRAM polling to detect a few of
the hot key press events. If you know your ThinkPad model does not
need to do NVRAM polling to support any of the hot keys you use,
unselecting this option will save about 1kB of memory.
@@ -383,7 +383,7 @@ config ATMEL_SSC
tristate "Device driver for Atmel SSC peripheral"
depends on AVR32 || ARCH_AT91
---help---
- This option enables device driver support for Atmel Syncronized
+ This option enables device driver support for Atmel Synchronized
Serial Communication peripheral (SSC).

The SSC peripheral supports a wide variety of serial frame based
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index ea8d7a3..7b8ad12 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -146,7 +146,7 @@ config MMC_SPI
select CRC7
select CRC_ITU_T
help
- Some systems accss MMC/SD cards using a SPI controller instead of
+ Some systems access MMC/SD cards using a SPI controller instead of
using a "native" MMC/SD controller. This has a disadvantage of
being relatively high overhead, but a compensating advantage of
working on many systems without dedicated MMC/SD controllers.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 77cb342..2aaeb71 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1383,7 +1383,7 @@ config SERIAL_BFIN_SPORT
depends on BLACKFIN && EXPERIMENTAL
select SERIAL_CORE
help
- Enble support SPORT emulate UART on Blackfin series.
+ Enable SPORT emulate UART on Blackfin series.

To compile this driver as a module, choose M here: the
module will be called bfin_sport_uart.
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index cc9f397..e1759d1 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -134,5 +134,5 @@ config USB_OTG_BLACKLIST_HUB
If you say Y here, then Linux will refuse to enumerate
external hubs. OTG hosts are allowed to reduce hardware
and software costs by not supporting external hubs. So
- are "Emedded Hosts" that don't offer OTG support.
+ are "Embedded Hosts" that don't offer OTG support.

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 70338f4..4f51c9e 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -501,8 +501,8 @@ config USB_SERIAL_SIERRAWIRELESS
help
Say M here if you want to use Sierra Wireless devices.

- Many deviecs have a feature known as TRU-Install, for those devices
- to work properly the USB Storage Sierra feature must be enabled.
+ Many devices have a feature known as TRU-Install. For those devices
+ to work properly, the USB Storage Sierra feature must be enabled.

To compile this driver as a module, choose M here: the
module will be called sierra.
diff --git a/fs/Kconfig b/fs/Kconfig
index abccb5d..97ef13d 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1795,7 +1795,7 @@ config RPCSEC_GSS_SPKM3
select CRYPTO_CBC
help
Choose Y here to enable Secure RPC using the SPKM3 public key
- GSS-API mechansim (RFC 2025).
+ GSS-API mechanism (RFC 2025).

Secure RPC calls with SPKM3 require an auxiliary userspace
daemon which may be found in the Linux nfs-utils package
diff --git a/init/Kconfig b/init/Kconfig
index c11da38..716f707 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -487,7 +487,7 @@ config PID_NS
depends on NAMESPACES && EXPERIMENTAL
help
Support process id namespaces. This allows having multiple
- process with the same pid as long as they are in different
+ processes with the same pid as long as they are in different
pid namespaces. This is a building block of containers.

Unless you want to work with an experimental feature
@@ -639,7 +639,7 @@ config COMPAT_BRK
Randomizing heap placement makes heap exploits harder, but it
also breaks ancient binaries (including anything libc5 based).
This option changes the bootup default to heap randomization
- disabled, and can be overriden runtime by setting
+ disabled, and can be overridden at runtime by setting
/proc/sys/kernel/randomize_va_space to 2.

On non-ancient distros (post-2000 ones) N is usually a safe choice.
diff --git a/net/Kconfig b/net/Kconfig
index 7612cc8..3700443 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -147,7 +147,7 @@ config NETFILTER_ADVANCED
default y
help
If you say Y here you can select between all the netfilter modules.
- If you say N the more ununsual ones will not be shown and the
+ If you say N the more unusual ones will not be shown and the
basic ones needed by most people will default to 'M'.

If unsure, say Y.
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ec99215..ca8cb32 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -22,17 +22,17 @@ menuconfig IPV6
if IPV6

config IPV6_PRIVACY
- bool "IPv6: Privacy Extensions support"
+ bool "IPv6: Privacy Extensions (RFC 3041) support"
---help---
Privacy Extensions for Stateless Address Autoconfiguration in IPv6
- support. With this option, additional periodically-alter
- pseudo-random global-scope unicast address(es) will assigned to
+ support. With this option, additional periodically-altered
+ pseudo-random global-scope unicast address(es) will be assigned to
your interface(s).

- We use our standard pseudo random algorithm to generate randomized
- interface identifier, instead of one described in RFC 3041.
+ We use our standard pseudo-random algorithm to generate the
+ randomized interface identifier, instead of one described in RFC 3041.

- By default, kernel do not generate temporary addresses.
+ By default the kernel does not generate temporary addresses.
To use temporary addresses, do

echo 2 >/proc/sys/net/ipv6/conf/all/use_tempaddr
@@ -43,9 +43,9 @@ config IPV6_ROUTER_PREF
bool "IPv6: Router Preference (RFC 4191) support"
---help---
Router Preference is an optional extension to the Router
- Advertisement message to improve the ability of hosts
- to pick more appropriate router, especially when the hosts
- is placed in a multi-homed network.
+ Advertisement message which improves the ability of hosts
+ to pick an appropriate router, especially when the hosts
+ are placed in a multi-homed network.

If unsure, say N.

diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 80d6933..0375b17 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -28,7 +28,7 @@ choice
---help---
This option selects the default rate control algorithm
mac80211 will use. Note that this default can still be
- overriden through the ieee80211_default_rc_algo module
+ overridden through the ieee80211_default_rc_algo module
parameter if different algorithms are available.

config MAC80211_RC_DEFAULT_PID
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index ee898e7..784f3d9 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -51,7 +51,7 @@ config NF_CT_ACCT

Please note that currently this option only sets a default state.
You may change it at boot time with nf_conntrack.acct=0/1 kernel
- paramater or by loading the nf_conntrack module with acct=0/1.
+ parameter or by loading the nf_conntrack module with acct=0/1.

You may also disable/enable it on a running system with:
sysctl net.netfilter.nf_conntrack_acct=0/1
--
1.5.4.3


\
 
 \ /
  Last update: 2008-09-02 04:17    [W:0.133 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site