lkml.org 
[lkml]   [2008]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectMisc fixes for 2.6.27
From
Date
Linus, please pull from
git://git.infradead.org/users/dwmw2/random-2.6.git

It contains the following fixes for 2.6.27:

Adrian Bunk (1):
dabusb_fpga_download(): fix a memory leak

David Woodhouse (3):
intel-iommu.c: Blacklist Intel DG33BU motherboard.
Fix modules_install on RO nfs-exported trees.
Remove '#include <stddef.h>' from mm/page_isolation.c

Zev Weiss (1):
[MTD] mtdchar.c: Fix regression in MEMGETREGIONINFO ioctl()

drivers/media/video/dabusb.c | 1 +
drivers/mtd/mtdchar.c | 16 ++++++++++------
drivers/pci/intel-iommu.c | 23 +++++++++++++++++++++++
firmware/Makefile | 16 ++++++++++++++--
mm/page_isolation.c | 1 -
5 files changed, 48 insertions(+), 9 deletions(-)
Full patch follows...

diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 48f4b92..79faedf 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -403,6 +403,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname)
ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
if (ret) {
err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
+ kfree(b);
return ret;
}

diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index d2f3318..e00d424 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -410,16 +410,20 @@ static int mtd_ioctl(struct inode *inode, struct file *file,

case MEMGETREGIONINFO:
{
- struct region_info_user ur;
+ uint32_t ur_idx;
+ struct mtd_erase_region_info *kr;
+ struct region_info_user *ur = (struct region_info_user *) argp;

- if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
+ if (get_user(ur_idx, &(ur->regionindex)))
return -EFAULT;

- if (ur.regionindex >= mtd->numeraseregions)
- return -EINVAL;
- if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
- sizeof(struct mtd_erase_region_info)))
+ kr = &(mtd->eraseregions[ur_idx]);
+
+ if (put_user(kr->offset, &(ur->offset))
+ || put_user(kr->erasesize, &(ur->erasesize))
+ || put_user(kr->numblocks, &(ur->numblocks)))
return -EFAULT;
+
break;
}

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 8d0e60a..c3edcdc 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -2348,11 +2348,34 @@ static void __init iommu_exit_mempool(void)

}

+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO "%s detected; disabling IOMMU\n",
+ id->ident);
+ dmar_disabled = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+ { /* Some DG33BU BIOS revisions advertised non-existent VT-d */
+ .callback = blacklist_iommu,
+ .ident = "Intel DG33BU",
+ { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+ }
+ },
+ { }
+};
+
+
void __init detect_intel_iommu(void)
{
if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
return;
if (early_dmar_detect()) {
+ dmi_check_system(intel_iommu_dmi_table);
+ if (dmar_disabled)
+ return;
iommu_detected = 1;
}
}
diff --git a/firmware/Makefile b/firmware/Makefile
index 9fe8604..da75a6f 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -146,15 +146,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex)

+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
# .HEX is also Intel HEX, but where the offset and length in each record
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)

# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)

$(firmware-dirs):
diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index 3444b58..c69f84f 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -2,7 +2,6 @@
* linux/mm/page_isolation.c
*/

-#include <stddef.h>
#include <linux/mm.h>
#include <linux/page-isolation.h>
#include <linux/pageblock-flags.h>

--
David Woodhouse Open Source Technology Centre
David.Woodhouse@intel.com Intel Corporation





\
 
 \ /
  Last update: 2008-09-01 22:17    [W:0.339 / U:0.160 seconds]
©2003-2014 Jasper Spaans. Advertise on this site