[lkml]   [2008]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: GA-MA790FX-DS5 SATA ahci NCQ erros on Jmicron 20360/20363 (JMB363) kernel 2.6.25-2 Debian/Lenny
Sergey Spiridonov wrote:
> Hi
> Jeff Garzik wrote:
>> So... suspect bad cables, bad port connectors, cable interference,
>> motherboard-caused interference or grounding problems, power supply
>> problems.
> I did exchange power supply and I did exchange hard drives. The same
> hard drive with the same cable works with SB600 and produces errors with
> JMB363. So looks like it is not cable or hard drive problem. May be the
> problem is JMB363 port connector on the motherboard. How can I check it?

Try new motherboard of same brand and model :/

In general, tons of ATA bus errors and SError complaints indicate some
sort of problem at the physical layer/level. Its always possible that
software is to blame, but bug report patterns so far tend to point to


 \ /
  Last update: 2008-08-24 06:43    [W:0.097 / U:0.192 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site