lkml.org 
[lkml]   [2008]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [Bug 11388] New: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of memory is usable
    Both hunks in the patch applied with an offset of -36 but the show_msr
    flag doesn't seem to have any effect. The dmesg is still the same
    number of lines accord to wc.

    I'm attaching the new dmesg anyways.

    $ cat /proc/cmdline
    root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0
    console=ttyS0,115200n8

    -J

    --
    On Wed, Aug 20, 2008 at 06:49:11PM -0700, Yinghai Lu wrote:
    > On Wed, Aug 20, 2008 at 6:20 PM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
    > > On Wed, Aug 20, 2008 at 6:04 PM, Andrew Morton
    > > <akpm@linux-foundation.org> wrote:
    > >>
    > >> (switched to email. Please respond via emailed reply-to-all, not via the
    > >> bugzilla web interface).
    > >>
    > >> On Wed, 20 Aug 2008 17:38:59 -0700 (PDT)
    > >> bugme-daemon@bugzilla.kernel.org wrote:
    > >>
    > >>> http://bugzilla.kernel.org/show_bug.cgi?id=11388
    > >>>
    > >>> Summary: 2.6.27-rc3 warns about MTRR range; only 3 of 16gb of
    > >>> memory is usable
    > >>> Product: Memory Management
    > >>> Version: 2.5
    > >>> KernelVersion: 2.6.27-rc3
    > >>> Platform: All
    > >>> OS/Version: Linux
    > >>> Tree: Mainline
    > >>> Status: NEW
    > >>> Severity: normal
    > >>> Priority: P1
    > >>> Component: MTTR
    > >>> AssignedTo: akpm@osdl.org
    > >>> ReportedBy: j_kernel@hoblitt.com
    > >>>
    > >>>
    > >>> Latest working kernel version: 2.4.24.2 (possibly later)
    > >>> Earliest failing kernel version: 2.6.27-rc3-21328-ga7f5aaf (from netdev-2.6)
    > >>> Distribution: Gentoo
    > >>> Hardware Environment: 2x Intel X5482
    > >>> Software Environment:
    > >>> Problem Description:
    > >>>
    > >>> [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing
    > >>> 13056MB of RAM.
    > >>> [ 0.000000] ------------[ cut here ]------------
    > >>> [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561
    > >>> mtrr_trim_uncached_memory+0x508/0x550()
    > >>> [ 0.000000] Modules linked in:
    > >>> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8
    > >>> [ 0.000000]
    > >>> [ 0.000000] Call Trace:
    > >>> [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77
    > >>> [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56
    > >>> [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c
    > >>> [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6
    > >>> [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550
    > >>> [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d
    > >>> [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be
    > >>> [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341
    > >>> [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7
    > >>> [ 0.000000]
    > >>> [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
    > >>>
    > >>>
    > >>> Steps to reproduce:
    > >>>
    > >>> This warning isn't present under 2.6.24.2 and the full range of physical memory
    > >>> is usable.
    > >>
    > >> Looks like a post-2.6.26 regression caused by
    > >> 12031a624af7816ec7660b82be648aa3703b4ebe.
    > > reg00: base=0xd0000000 (3328MB), size=196864MB: uncachable, count=1
    > > reg01: base=0xe0000000 (3584MB), size=197120MB: uncachable, count=1
    > > reg02: base=0x00000000 ( 0MB), size=212992MB: write-back, count=1
    > > reg03: base=0x400000000 (16384MB), size=197120MB: write-back, count=1
    > > reg04: base=0x420000000 (16896MB), size=196864MB: write-back, count=1
    > >
    > > the size mtrr looks crazy.
    >
    > please apply attached patch and boot with show_msr=1 to dump the msr
    > (including mtrr)
    >
    > YH

    > [PATCH] x86_64: printout msr
    >
    > commandline show_msr=1 for bsp, show_msr=32 for all 32 cpus.
    >
    > Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
    >
    > ---
    > arch/x86/kernel/cpu/common_64.c | 46 ++++++++++++++++++++++++++++++++++++++++
    > include/asm-x86/msr.h | 23 ++++++++++++++++++++
    > 2 files changed, 69 insertions(+)
    >
    > Index: linux-2.6/arch/x86/kernel/cpu/common_64.c
    > ===================================================================
    > --- linux-2.6.orig/arch/x86/kernel/cpu/common_64.c
    > +++ linux-2.6/arch/x86/kernel/cpu/common_64.c
    > @@ -430,6 +430,49 @@ static __init int setup_noclflush(char *
    > }
    > __setup("noclflush", setup_noclflush);
    >
    > +struct msr_range {
    > + unsigned min;
    > + unsigned max;
    > +};
    > +
    > +static struct msr_range msr_range_array[] __cpuinitdata = {
    > + { 0x00000000, 0x00000418},
    > + { 0xc0000000, 0xc000040b},
    > + { 0xc0010000, 0xc0010142},
    > + { 0xc0011000, 0xc001103b},
    > +};
    > +
    > +static void __cpuinit print_cpu_msr(void)
    > +{
    > + unsigned index;
    > + u64 val;
    > + int i;
    > + unsigned index_min, index_max;
    > +
    > + for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
    > + index_min = msr_range_array[i].min;
    > + index_max = msr_range_array[i].max;
    > + for (index = index_min; index < index_max; index++) {
    > + if (rdmsrl_amd_safe(index, &val))
    > + continue;
    > + printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
    > + }
    > + }
    > +}
    > +
    > +static int show_msr __cpuinitdata;
    > +static __init int setup_show_msr(char *arg)
    > +{
    > + int num;
    > +
    > + get_option(&arg, &num);
    > +
    > + if (num > 0)
    > + show_msr = num;
    > + return 1;
    > +}
    > +__setup("show_msr=", setup_show_msr);
    > +
    > void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
    > {
    > if (c->x86_model_id[0])
    > @@ -439,6 +482,9 @@ void __cpuinit print_cpu_info(struct cpu
    > printk(KERN_CONT " stepping %02x\n", c->x86_mask);
    > else
    > printk(KERN_CONT "\n");
    > +
    > + if (c->cpu_index < show_msr)
    > + print_cpu_msr();
    > }
    >
    > static __init int setup_disablecpuid(char *arg)
    > Index: linux-2.6/include/asm-x86/msr.h
    > ===================================================================
    > --- linux-2.6.orig/include/asm-x86/msr.h
    > +++ linux-2.6/include/asm-x86/msr.h
    > @@ -63,6 +63,22 @@ static inline unsigned long long native_
    > return EAX_EDX_VAL(val, low, high);
    > }
    >
    > +static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
    > + int *err)
    > +{
    > + DECLARE_ARGS(val, low, high);
    > +
    > + asm volatile("2: rdmsr ; xor %0,%0\n"
    > + "1:\n\t"
    > + ".section .fixup,\"ax\"\n\t"
    > + "3: mov %3,%0 ; jmp 1b\n\t"
    > + ".previous\n\t"
    > + _ASM_EXTABLE(2b, 3b)
    > + : "=r" (*err), EAX_EDX_RET(val, low, high)
    > + : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
    > + return EAX_EDX_VAL(val, low, high);
    > +}
    > +
    > static inline void native_write_msr(unsigned int msr,
    > unsigned low, unsigned high)
    > {
    > @@ -158,6 +174,13 @@ static inline int rdmsrl_safe(unsigned m
    > *p = native_read_msr_safe(msr, &err);
    > return err;
    > }
    > +static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
    > +{
    > + int err;
    > +
    > + *p = native_read_msr_amd_safe(msr, &err);
    > + return err;
    > +}
    >
    > #define rdtscl(low) \
    > ((low) = (u32)native_read_tsc())

    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Linux version 2.6.27-rc3-21328-ga7f5aaf (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #8 SMP Wed Aug 20 14:17:51 HST 2008
    [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
    [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff00000 (usable)
    [ 0.000000] BIOS-e820: 00000000cff00000 - 00000000cff0a000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cff0b000 - 00000000d0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
    [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x3ffffffff
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 13056MB of RAM.
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1561 mtrr_trim_uncached_memory+0x508/0x550()
    [ 0.000000] Modules linked in:
    [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc3-21328-ga7f5aaf #8
    [ 0.000000]
    [ 0.000000] Call Trace:
    [ 0.000000] [<ffffffff80234c3e>] warn_on_slowpath+0x51/0x77
    [ 0.000000] [<ffffffff8023570a>] printk+0x4e/0x56
    [ 0.000000] [<ffffffff803add02>] sort+0xfa/0x18c
    [ 0.000000] [<ffffffff808283d3>] cmp_range+0x0/0x6
    [ 0.000000] [<ffffffff80828a47>] mtrr_trim_uncached_memory+0x508/0x550
    [ 0.000000] [<ffffffff802178e1>] post_set+0x20/0x3d
    [ 0.000000] [<ffffffff80824f99>] setup_arch+0x39d/0x6be
    [ 0.000000] [<ffffffff8081e962>] start_kernel+0x74/0x341
    [ 0.000000] [<ffffffff8081e394>] x86_64_start_kernel+0xe3/0xe7
    [ 0.000000]
    [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
    [ 0.000000] update e820 for mtrr
    [ 0.000000] modified physical RAM map:
    [ 0.000000] modified: 0000000000000000 - 000000000009e400 (usable)
    [ 0.000000] modified: 000000000009e400 - 00000000000a0000 (reserved)
    [ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved)
    [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] modified: 0000000000100000 - 00000000cff00000 (usable)
    [ 0.000000] modified: 00000000cff00000 - 00000000cff0a000 (ACPI data)
    [ 0.000000] modified: 00000000cff0a000 - 00000000cff0b000 (ACPI NVS)
    [ 0.000000] modified: 00000000cff0b000 - 00000000d0000000 (reserved)
    [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] modified: 00000000ff000000 - 0000000430000000 (reserved)
    [ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x3ffffffff
    [ 0.000000] init_memory_mapping
    [ 0.000000] 0000000000 - 00cfe00000 page 2M
    [ 0.000000] 00cfe00000 - 00cff00000 page 4k
    [ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000
    [ 0.000000] last_map_addr: cff00000 end: cff00000
    [ 0.000000] RAMDISK: 37e11000 - 37feff22
    [ 0.000000] DMI present.
    [ 0.000000] ACPI: RSDP 000F7020, 0024 (r2 PTLTD )
    [ 0.000000] ACPI: XSDT CFF0395D, 005C (r1 PTLTD XSDT 6040000 LTP 0)
    [ 0.000000] ACPI: FACP CFF09D60, 00F4 (r3 INTEL TUMWATER 6040000 PTL 3)
    [ 0.000000] ACPI: DSDT CFF0599D, 434F (r1 Intel SEABURG 6040000 MSFT 3000000)
    [ 0.000000] ACPI: FACS CFF0AFC0, 0040
    [ 0.000000] ACPI: _MAR CFF09E54, 0030 (r1 Intel OEMDMAR 6040000 LOHR 1)
    [ 0.000000] ACPI: APIC CFF09E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0)
    [ 0.000000] ACPI: MCFG CFF09F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0)
    [ 0.000000] ACPI: BOOT CFF09F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    [ 0.000000] ACPI: SPCR CFF09FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
    [ 0.000000] ACPI: SSDT CFF039B9, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-00000000cff00000
    [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff00000
    [ 0.000000] NODE_DATA [000000000000c000 - 0000000000016fff]
    [ 0.000000] bootmap [0000000000017000 - 0000000000030fdf] pages 1a
    [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00cff00000]
    [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    [ 0.000000] #2 [0000200000 - 00009eff70] TEXT DATA BSS ==> [0000200000 - 00009eff70]
    [ 0.000000] #3 [0037e11000 - 0037feff22] RAMDISK ==> [0037e11000 - 0037feff22]
    [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000]
    [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
    [ 0.000000] found SMP MP-table at [ffff8800000f7050] 000f7050
    [ 0.000000] [ffffe20000000000-ffffe200033fffff] PMD -> [ffff880001200000-ffff8800045fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000000 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00100000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000000 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x000cff00
    [ 0.000000] On node 0 totalpages: 851614
    [ 0.000000] DMA zone: 1797 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 834372 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
    [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec88000, GSI 24-47
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Setting APIC routing to flat
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
    [ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
    [ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
    [ 0.000000] PERCPU: Allocating 51624 bytes of per cpu data
    [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8, nr_node_ids 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 836169
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc show_msr=1 console=tty0 console=ttyS0,115200n8
    [ 0.000000] Initializing CPU#0
    [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] TSC calibrated against PM_TIMER
    [ 0.000000] Detected 3192.011 MHz processor.
    [ 0.003333] Console: colour VGA+ 80x25
    [ 0.003333] console [tty0] enabled
    [ 0.003333] console [ttyS0] enabled
    [ 0.003333] Checking aperture...
    [ 0.003333] No AGP bridge found
    [ 0.003333] Memory: 3342244k/3406848k available (3799k kernel code, 64212k reserved, 2164k data, 672k init)
    [ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
    [ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.006666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.02 BogoMIPS (lpj=10640036)
    [ 0.013085] Security Framework initialized
    [ 0.016665] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.021467] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.026664] Mount-cache hash table entries: 256
    [ 0.029998] Initializing cgroup subsys ns
    [ 0.033331] Initializing cgroup subsys cpuacct
    [ 0.036664] Initializing cgroup subsys memory
    [ 0.039997] Initializing cgroup subsys devices
    [ 0.043330] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.048288] CPU: L2 cache: 6144K
    [ 0.051710] CPU 0/0 -> Node 0
    [ 0.054867] CPU: Physical Processor ID: 0
    [ 0.059061] CPU: Processor Core ID: 0
    [ 0.062918] CPU0: Thermal monitoring enabled (TM2)
    [ 0.066662] using mwait in idle threads.
    [ 0.069995] ACPI: Core revision 20080609
    [ 0.082860] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.119582] CPU0: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.124747] Using local APIC timer interrupts.
    [ 0.133324] APIC timer calibration result 24937571
    [ 0.133324] Detected 24.937 MHz APIC timer.
    [ 0.136657] Booting processor 1/4 ip 6000
    [ 0.149990] Initializing CPU#1
    [ 0.149990] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640186)
    [ 0.149990] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.149990] CPU: L2 cache: 6144K
    [ 0.149990] CPU 1/4 -> Node 0
    [ 0.149990] CPU: Physical Processor ID: 1
    [ 0.149990] CPU: Processor Core ID: 0
    [ 0.149990] CPU1: Thermal monitoring enabled (TM2)
    [ 0.149990] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    [ 0.233318] CPU1: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.239984] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [ 0.243317] Booting processor 2/1 ip 6000
    [ 0.256649] Initializing CPU#2
    [ 0.256649] Calibrating delay using timer specific routine.. 6386.10 BogoMIPS (lpj=10640161)
    [ 0.256649] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.256649] CPU: L2 cache: 6144K
    [ 0.256649] CPU 2/1 -> Node 0
    [ 0.256649] CPU: Physical Processor ID: 0
    [ 0.256649] CPU: Processor Core ID: 1
    [ 0.256649] CPU2: Thermal monitoring enabled (TM2)
    [ 0.256649] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
    [ 0.339977] CPU2: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.348077] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    [ 0.353310] Booting processor 3/5 ip 6000
    [ 0.366642] Initializing CPU#3
    [ 0.366642] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640183)
    [ 0.366642] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.366642] CPU: L2 cache: 6144K
    [ 0.366642] CPU 3/5 -> Node 0
    [ 0.366642] CPU: Physical Processor ID: 1
    [ 0.366642] CPU: Processor Core ID: 1
    [ 0.366642] CPU3: Thermal monitoring enabled (TM2)
    [ 0.366642] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
    [ 0.449857] CPU3: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.456636] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    [ 0.459970] Booting processor 4/2 ip 6000
    [ 0.473302] Initializing CPU#4
    [ 0.473302] Calibrating delay using timer specific routine.. 6386.08 BogoMIPS (lpj=10640133)
    [ 0.473302] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.473302] CPU: L2 cache: 6144K
    [ 0.473302] CPU 4/2 -> Node 0
    [ 0.473302] CPU: Physical Processor ID: 0
    [ 0.473302] CPU: Processor Core ID: 2
    [ 0.473302] CPU4: Thermal monitoring enabled (TM2)
    [ 0.473302] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
    [ 0.556633] CPU4: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.563300] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
    [ 0.566633] Booting processor 5/6 ip 6000
    [ 0.579962] Initializing CPU#5
    [ 0.579962] Calibrating delay using timer specific routine.. 6386.09 BogoMIPS (lpj=10640155)
    [ 0.579962] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.579962] CPU: L2 cache: 6144K
    [ 0.579962] CPU 5/6 -> Node 0
    [ 0.579962] CPU: Physical Processor ID: 1
    [ 0.579962] CPU: Processor Core ID: 2
    [ 0.579962] CPU5: Thermal monitoring enabled (TM2)
    [ 0.579962] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
    [ 0.663300] CPU5: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.669967] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
    [ 0.673300] Booting processor 6/3 ip 6000
    [ 0.686621] Initializing CPU#6
    [ 0.686621] Calibrating delay using timer specific routine.. 6386.08 BogoMIPS (lpj=10640131)
    [ 0.686621] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.686621] CPU: L2 cache: 6144K
    [ 0.686621] CPU 6/3 -> Node 0
    [ 0.686621] CPU: Physical Processor ID: 0
    [ 0.686621] CPU: Processor Core ID: 3
    [ 0.686621] CPU6: Thermal monitoring enabled (TM2)
    [ 0.686621] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
    [ 0.769967] CPU6: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.776633] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
    [ 0.779967] Booting processor 7/7 ip 6000
    [ 0.793281] Initializing CPU#7
    [ 0.793281] Calibrating delay using timer specific routine.. 6386.11 BogoMIPS (lpj=10640183)
    [ 0.793281] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.793281] CPU: L2 cache: 6144K
    [ 0.793281] CPU 7/7 -> Node 0
    [ 0.793281] CPU: Physical Processor ID: 1
    [ 0.793281] CPU: Processor Core ID: 3
    [ 0.793281] CPU7: Thermal monitoring enabled (TM2)
    [ 0.793281] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
    [ 0.876633] CPU7: Intel(R) Xeon(R) CPU X5482 @ 3.20GHz stepping 06
    [ 0.883300] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
    [ 0.886633] Brought up 8 CPUs
    [ 0.889809] Total of 8 processors activated (51093.73 BogoMIPS).
    [ 0.893300] net_namespace: 864 bytes
    [ 0.896633] xor: automatically using best checksumming function: generic_sse
    [ 0.916224] generic_sse: 11872.800 MB/sec
    [ 0.919967] xor: using function: generic_sse (11872.800 MB/sec)
    [ 0.923300] NET: Registered protocol family 16
    [ 0.926633] No dock devices found.
    [ 0.929967] ACPI: bus type pci registered
    [ 0.933300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
    [ 0.936633] PCI: MCFG area at e0000000 reserved in E820
    [ 0.939967] PCI: Using MMCONFIG at e0000000 - e08fffff
    [ 0.943300] PCI: Using configuration type 1 for base access
    [ 0.949967] ACPI: EC: Look up EC in DSDT
    [ 0.953300] ACPI: Interpreter enabled
    [ 0.956633] ACPI: (supports S0 S3 S4 S5)
    [ 0.959967] ACPI: Using IOAPIC for interrupt routing
    [ 0.966633] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 0.969967] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
    [ 0.973300] pci 0000:00:00.0: PME# disabled
    [ 0.976633] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.979967] pci 0000:00:01.0: PME# disabled
    [ 0.983300] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.986633] pci 0000:00:05.0: PME# disabled
    [ 0.989967] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    [ 0.993300] pci 0000:00:09.0: PME# disabled
    [ 0.996633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.999967] pci 0000:00:1b.0: PME# disabled
    [ 1.003300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.006633] pci 0000:00:1c.0: PME# disabled
    [ 1.009967] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 1.013300] pci 0000:00:1d.7: PME# disabled
    [ 1.016633] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [ 1.016633] pci 0000:01:00.0: supports D1
    [ 1.016633] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 1.019967] pci 0000:03:00.0: PME# disabled
    [ 1.023300] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
    [ 1.026633] pci 0000:03:00.3: PME# disabled
    [ 1.029967] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    [ 1.033300] pci 0000:04:00.0: PME# disabled
    [ 1.036633] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
    [ 1.039967] pci 0000:04:02.0: PME# disabled
    [ 1.043300] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
    [ 1.046633] pci 0000:06:00.0: PME# disabled
    [ 1.049967] pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
    [ 1.053300] pci 0000:06:00.1: PME# disabled
    [ 1.056633] pci 0000:09:05.0: supports D1
    [ 1.056633] pci 0000:09:05.0: supports D2
    [ 1.056633] pci 0000:09:06.0: supports D2
    [ 1.056633] pci 0000:09:06.0: PME# supported from D2 D3hot D3cold
    [ 1.059967] pci 0000:09:06.0: PME# disabled
    [ 1.063300] pci 0000:00:1e.0: transparent bridge
    [ 1.066633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.067095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 1.067267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
    [ 1.067520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [ 1.067855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0._PRT]
    [ 1.068362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD0._PRT]
    [ 1.068952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMD0.BPD2._PRT]
    [ 1.069622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT]
    [ 1.069967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 1.069967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 1.079967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
    [ 1.086417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
    [ 1.093100] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
    [ 1.096633] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
    [ 1.103092] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
    [ 1.109748] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
    [ 1.116209] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 14 15)
    [ 1.123091] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
    [ 1.129967] Linux Plug and Play Support v0.97 (c) Adam Belay
    [ 1.133300] pnp: PnP ACPI init
    [ 1.136606] ACPI: bus type pnp registered
    [ 1.143300] pnp: PnP ACPI: found 11 devices
    [ 1.146633] ACPI: ACPI bus type pnp unregistered
    [ 1.149967] SCSI subsystem initialized
    [ 1.153300] libata version 3.00 loaded.
    [ 1.153300] usbcore: registered new interface driver usbfs
    [ 1.156633] usbcore: registered new interface driver hub
    [ 1.159967] usbcore: registered new device driver usb
    [ 1.163300] PCI: Using ACPI for IRQ routing
    [ 1.182453] PCI-GART: No AMD northbridge found.
    [ 1.186633] hpet clockevent registered
    [ 1.186633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 1.191225] hpet0: 3 64-bit timers, 14318180 Hz
    [ 1.196633] ACPI: RTC can wake from S4
    [ 1.206787] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    [ 1.210124] system 00:01: ioport range 0x800-0x80f has been reserved
    [ 1.216660] system 00:01: ioport range 0x1000-0x107f has been reserved
    [ 1.223304] system 00:01: ioport range 0x1180-0x11bf has been reserved
    [ 1.230025] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
    [ 1.236751] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
    [ 1.244580] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
    [ 1.252406] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
    [ 1.260230] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
    [ 1.267562] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved
    [ 1.274894] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
    [ 1.282225] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
    [ 1.294506] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    [ 1.296791] pci 0000:00:01.0: IO window: disabled
    [ 1.301858] pci 0000:00:01.0: MEM window: 0xdc100000-0xdc1fffff
    [ 1.308140] pci 0000:00:01.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
    [ 1.316064] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
    [ 1.322185] pci 0000:00:05.0: IO window: disabled
    [ 1.327259] pci 0000:00:05.0: MEM window: disabled
    [ 1.332419] pci 0000:00:05.0: PREFETCH window: disabled
    [ 1.338019] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
    [ 1.344139] pci 0000:04:00.0: IO window: disabled
    [ 1.349215] pci 0000:04:00.0: MEM window: disabled
    [ 1.354382] pci 0000:04:00.0: PREFETCH window: disabled
    [ 1.359982] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06
    [ 1.366655] pci 0000:04:02.0: IO window: 0x2000-0x2fff
    [ 1.372163] pci 0000:04:02.0: MEM window: 0xdc200000-0xdc2fffff
    [ 1.378460] pci 0000:04:02.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
    [ 1.386390] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
    [ 1.392505] pci 0000:03:00.0: IO window: 0x2000-0x2fff
    [ 1.398019] pci 0000:03:00.0: MEM window: 0xdc200000-0xdc2fffff
    [ 1.404312] pci 0000:03:00.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
    [ 1.412230] pci 0000:03:00.3: PCI bridge, secondary bus 0000:07
    [ 1.418350] pci 0000:03:00.3: IO window: disabled
    [ 1.423427] pci 0000:03:00.3: MEM window: disabled
    [ 1.428588] pci 0000:03:00.3: PREFETCH window: disabled
    [ 1.434184] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
    [ 1.440304] pci 0000:00:09.0: IO window: 0x2000-0x2fff
    [ 1.445813] pci 0000:00:09.0: MEM window: 0xdc200000-0xdc3fffff
    [ 1.456277] pci 0000:00:09.0: PREFETCH window: 0x000000d1100000-0x000000d11fffff
    [ 1.464201] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
    [ 1.470313] pci 0000:00:1c.0: IO window: disabled
    [ 1.475395] pci 0000:00:1c.0: MEM window: disabled
    [ 1.480557] pci 0000:00:1c.0: PREFETCH window: disabled
    [ 1.486173] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
    [ 1.492293] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
    [ 1.497803] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
    [ 1.504090] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
    [ 1.512011] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.518911] pci 0000:00:01.0: setting latency timer to 64
    [ 1.518917] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.525809] pci 0000:00:05.0: setting latency timer to 64
    [ 1.525815] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.532718] pci 0000:00:09.0: setting latency timer to 64
    [ 1.532725] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.539636] pci 0000:03:00.0: setting latency timer to 64
    [ 1.539643] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.546542] pci 0000:04:00.0: setting latency timer to 64
    [ 1.546551] pci 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 1.553447] pci 0000:04:02.0: setting latency timer to 64
    [ 1.553455] pci 0000:03:00.3: setting latency timer to 64
    [ 1.556782] pci 0000:00:1c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [ 1.560356] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.560363] pci 0000:00:1e.0: setting latency timer to 64
    [ 1.560380] NET: Registered protocol family 2
    [ 1.598362] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.605434] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.616791] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.623135] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.630426] TCP reno registered
    [ 1.643899] NET: Registered protocol family 1
    [ 1.648674] checking if image is initramfs... it is
    [ 1.749046] Freeing initrd memory: 1915k freed
    [ 1.756055] Simple Boot Flag at 0x40 set to 0x80
    [ 1.766066] audit: initializing netlink socket (disabled)
    [ 1.766526] type=2000 audit(1219350940.763:1): initialized
    [ 1.779499] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.789241] VFS: Disk quotas dquot_6.5.1
    [ 1.796059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.802377] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [ 1.809394] msgmni has been set to 6531
    [ 1.812727] async_tx: api initialized (async)
    [ 1.817410] io scheduler noop registered
    [ 1.820520] io scheduler anticipatory registered
    [ 1.824640] io scheduler deadline registered
    [ 1.832001] io scheduler cfq registered (default)
    [ 1.834045] pci 0000:09:05.0: Boot video device
    [ 1.836062] pcieport-driver 0000:00:01.0: setting latency timer to 64
    [ 1.836062] pcieport-driver 0000:00:01.0: found MSI capability
    [ 1.842343] pci_express 0000:00:01.0:pcie00: allocate port service
    [ 1.842729] pci_express 0000:00:01.0:pcie01: allocate port service
    [ 1.842729] pcieport-driver 0000:00:05.0: setting latency timer to 64
    [ 1.842729] pcieport-driver 0000:00:05.0: found MSI capability
    [ 1.848664] pci_express 0000:00:05.0:pcie00: allocate port service
    [ 1.849397] pci_express 0000:00:05.0:pcie01: allocate port service
    [ 1.849397] pcieport-driver 0000:00:09.0: setting latency timer to 64
    [ 1.849397] pcieport-driver 0000:00:09.0: found MSI capability
    [ 1.854900] pci_express 0000:00:09.0:pcie00: allocate port service
    [ 1.856064] pci_express 0000:00:09.0:pcie01: allocate port service
    [ 1.856064] pcieport-driver 0000:00:1c.0: setting latency timer to 64
    [ 1.856064] pcieport-driver 0000:00:1c.0: found MSI capability
    [ 1.861124] pci_express 0000:00:1c.0:pcie00: allocate port service
    [ 1.862731] pci_express 0000:00:1c.0:pcie02: allocate port service
    [ 1.862731] pci_express 0000:00:1c.0:pcie03: allocate port service
    [ 1.862731] pcieport-driver 0000:03:00.0: setting latency timer to 64
    [ 1.862731] pci_express 0000:03:00.0:pcie11: allocate port service
    [ 1.862731] pcieport-driver 0000:04:00.0: setting latency timer to 64
    [ 1.862731] pcieport-driver 0000:04:00.0: found MSI capability
    [ 1.867353] Switched to high resolution mode on CPU 7
    [ 1.867353] pci_express 0000:04:00.0:pcie21: allocate port service
    [ 1.867070] Switched to high resolution mode on CPU 2
    [ 1.869398] pcieport-driver 0000:04:02.0: setting latency timer to 64
    [ 1.869398] pcieport-driver 0000:04:02.0: found MSI capability
    [ 1.869398] Switched to high resolution mode on CPU 3
    [ 1.866687] Switched to high resolution mode on CPU 1
    [ 1.869398] Switched to high resolution mode on CPU 6
    [ 1.869336] Switched to high resolution mode on CPU 4
    [ 1.869764] Switched to high resolution mode on CPU 5
    [ 1.869987] Switched to high resolution mode on CPU 0
    [ 1.870468] pci_express 0000:04:02.0:pcie21: allocate port service
    [ 2.057905] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
    [ 2.057905] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
    [ 2.057905] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support
    [ 2.057905] input: Power Button (FF) as /class/input/input0
    [ 2.057905] ACPI: Power Button (FF) [PWRF]
    [ 2.057905] input: Power Button (CM) as /class/input/input1
    [ 2.057905] ACPI: Power Button (CM) [PWRB]
    [ 2.057905] ACPI: SSDT CFF04DBE, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228)
    [ 2.057905] processor ACPI0007:00: registered as cooling_device0
    [ 2.057905] ACPI: Processor [CPU0] (supports 8 throttling states)
    [ 2.057905] ACPI: SSDT CFF04F9B, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228)
    [ 2.057905] processor ACPI0007:01: registered as cooling_device1
    [ 2.057905] ACPI: Processor [CPU1] (supports 8 throttling states)
    [ 2.057905] ACPI: SSDT CFF05109, 016E (r1 PmRef Cpu2Ist 3000 INTL 20050228)
    [ 2.057905] processor ACPI0007:02: registered as cooling_device2
    [ 2.057905] ACPI: Processor [CPU2] (supports 8 throttling states)
    [ 2.057905] ACPI: SSDT CFF05277, 016E (r1 PmRef Cpu3Ist 3000 INTL 20050228)
    [ 2.057905] processor ACPI0007:03: registered as cooling_device3
    [ 2.057905] ACPI: Processor [CPU3] (supports 8 throttling states)
    [ 2.057905] ACPI: SSDT CFF053E5, 016E (r1 PmRef CPU4Ist 3000 INTL 20050228)
    [ 2.057906] processor ACPI0007:04: registered as cooling_device4
    [ 2.057906] ACPI: Processor [CPU4] (supports 8 throttling states)
    [ 2.057906] ACPI: SSDT CFF05553, 016E (r1 PmRef CPU5Ist 3000 INTL 20050228)
    [ 2.057906] processor ACPI0007:05: registered as cooling_device5
    [ 2.057906] ACPI: Processor [CPU5] (supports 8 throttling states)
    [ 2.057906] ACPI: SSDT CFF056C1, 016E (r1 PmRef Cpu6Ist 3000 INTL 20050228)
    [ 2.057906] processor ACPI0007:06: registered as cooling_device6
    [ 2.057906] ACPI: Processor [CPU6] (supports 8 throttling states)
    [ 2.057906] ACPI: SSDT CFF0582F, 016E (r1 PmRef Cpu7Ist 3000 INTL 20050228)
    [ 2.057906] processor ACPI0007:07: registered as cooling_device7
    [ 2.059010] ACPI: Processor [CPU7] (supports 8 throttling states)
    [ 2.127920] Non-volatile memory driver v1.2
    [ 2.137073] intel_rng: FWH not detected
    [ 2.137655] Linux agpgart interface v0.103
    [ 2.142568] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    [ 2.149464] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 2.155797] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 2.162133] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 2.168478] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 2.190625] FDC 0 is a post-1991 82077
    [ 2.196818] brd: module loaded
    [ 2.200798] loop: module loaded
    [ 2.203969] tun: Universal TUN/TAP device driver, 1.6
    [ 2.207954] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 2.216078] console [netcon0] enabled
    [ 2.220046] netconsole: network logging started
    [ 2.223557] Uniform Multi-Platform E-IDE driver
    [ 2.229458] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
    [ 2.239618] Probing IDE interface ide0...
    [ 2.938159] hda: Optiarc DVD RW AD-7590A, ATAPI CD/DVD-ROM drive
    [ 3.584497] Probing IDE interface ide1...
    [ 4.117883] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    [ 4.120417] ide1 at 0x170-0x177,0x376 on irq 15
    [ 4.127680] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache
    [ 4.135328] Uniform CD-ROM driver Revision: 3.20
    [ 6.730957] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    [ 6.739681] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    [ 6.748200] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
    [ 6.755287] Driver 'sd' needs updating - please use bus_type methods
    [ 6.761939] Driver 'sr' needs updating - please use bus_type methods
    [ 6.768535] ata_piix 0000:00:1f.1: version 2.12
    [ 6.768535] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 6.775217] ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
    [ 6.782752] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16)
    [ 6.790999] ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177]
    [ 6.798722] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16)
    [ 6.806962] ata_piix 0000:00:1f.1: no available native port
    [ 6.814584] Fusion MPT base driver 3.04.07
    [ 6.817295] Copyright (c) 1999-2008 LSI Corporation
    [ 6.821978] Fusion MPT SPI Host driver 3.04.07
    [ 6.828279] Fusion MPT SAS Host driver 3.04.07
    [ 6.834584] ohci1394 0000:09:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 6.890635] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc040000-dc0407ff] Max Packet=[2048] IR/IT contexts=[4/8]
    [ 6.913818] ieee1394: raw1394: /dev/raw1394 device initialized
    [ 6.917291] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 6.923965] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 6.923974] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 6.930097] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 6.940624] ehci_hcd 0000:00:1d.7: debug port 1
    [ 6.943963] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 6.943975] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc608000
    [ 6.963958] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [ 6.971250] usb usb1: configuration #1 chosen from 1 choice
    [ 6.974979] hub 1-0:1.0: USB hub found
    [ 6.978985] hub 1-0:1.0: 8 ports detected
    [ 7.087911] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 7.087911] USB Universal Host Controller Interface driver v3.0
    [ 7.090032] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.099763] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 7.099770] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 7.105905] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 7.113756] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
    [ 7.119781] usb usb2: configuration #1 chosen from 1 choice
    [ 7.127916] hub 2-0:1.0: USB hub found
    [ 7.128922] hub 2-0:1.0: 2 ports detected
    [ 7.237910] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 7.243340] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 7.243347] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 7.249619] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 7.257487] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
    [ 7.264583] usb usb3: configuration #1 chosen from 1 choice
    [ 7.268605] hub 3-0:1.0: USB hub found
    [ 7.272675] hub 3-0:1.0: 2 ports detected
    [ 7.381244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    [ 7.386677] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 7.386687] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 7.392948] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 7.400814] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
    [ 7.409047] usb usb4: configuration #1 chosen from 1 choice
    [ 7.411620] hub 4-0:1.0: USB hub found
    [ 7.416665] hub 4-0:1.0: 2 ports detected
    [ 7.524577] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [ 7.530006] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 7.530013] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 7.536277] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 7.544152] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
    [ 7.552385] usb usb5: configuration #1 chosen from 1 choice
    [ 7.555258] hub 5-0:1.0: USB hub found
    [ 7.559263] hub 5-0:1.0: 2 ports detected
    [ 7.667910] usbcore: registered new interface driver usblp
    [ 7.670009] Initializing USB Mass Storage driver...
    [ 7.679164] usbcore: registered new interface driver usb-storage
    [ 7.684364] USB Mass Storage support registered.
    [ 7.688774] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    [ 7.706666] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 7.707299] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 7.713958] mice: PS/2 mouse device common for all mice
    [ 8.083323] md: linear personality registered for level -1
    [ 8.083327] md: raid0 personality registered for level 0
    [ 8.089095] md: raid1 personality registered for level 1
    [ 8.094588] md: raid10 personality registered for level 10
    [ 8.156666] raid6: int64x1 2955 MB/s
    [ 8.190623] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e08100002824f8]
    [ 8.217233] raid6: int64x2 3537 MB/s
    [ 8.276666] raid6: int64x4 3438 MB/s
    [ 8.336666] raid6: int64x8 2310 MB/s
    [ 8.396667] raid6: sse2x1 3699 MB/s
    [ 8.456666] raid6: sse2x2 7339 MB/s
    [ 8.516666] raid6: sse2x4 8744 MB/s
    [ 8.520001] raid6: using algorithm sse2x4 (8744 MB/s)
    [ 8.524573] md: raid6 personality registered for level 6
    [ 8.530066] md: raid5 personality registered for level 5
    [ 8.535567] md: raid4 personality registered for level 4
    [ 8.540833] md: multipath personality registered for level -4
    [ 8.550392] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    [ 8.558945] cpuidle: using governor ladder
    [ 8.561311] cpuidle: using governor menu
    [ 8.565682] usbcore: registered new interface driver usbhid
    [ 8.571516] usbhid: v2.6:USB HID core driver
    [ 8.580208] oprofile: using NMI interrupt.
    [ 8.580421] TCP cubic registered
    [ 8.586874] NET: Registered protocol family 10
    [ 8.588544] IPv6 over IPv4 tunneling driver
    [ 8.596875] NET: Registered protocol family 17
    [ 8.600208] RPC: Registered udp transport module.
    [ 8.605577] RPC: Registered tcp transport module.
    [ 8.611255] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    [ 8.617963] Freeing unused kernel memory: 672k freed
    [ 8.621765] Write protecting the kernel read-only data: 5536k
    [ 8.863538] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 8.863538] arcmsr 0000:01:00.0: setting latency timer to 64
    [ 8.876862] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-1-31
    [ 8.890209] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
    [ 8.890209] Driver Version 1.20.00.15 2008/02/27
    [ 8.891249] scsi 0:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5
    [ 8.891041] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
    [ 8.890625] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
    [ 8.891458] sd 0:0:0:0: [sda] Write Protect is off
    [ 8.891458] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
    [ 8.890833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 8.893749] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
    [ 8.893749] sd 0:0:0:0: [sda] 42968747008 512-byte hardware sectors (21999998 MB)
    [ 8.891041] sd 0:0:0:0: [sda] Write Protect is off
    [ 8.891041] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
    [ 8.891458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 8.891458] sda: sda1 sda2 sda3 sda4
    [ 9.288125] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 9.288125] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 9.288125] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
    [ 9.288125] scsi 0:0:16:0: Attached scsi generic sg1 type 3
    [ 9.357920] 3ware Storage Controller device driver for Linux v1.26.02.002.
    [ 9.369999] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
    [ 9.384166] Adaptec aacraid driver 1.1-5[2456]-ms
    [ 9.491458] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
    [ 9.491459] SGI XFS Quota Management subsystem
    [ 9.507917] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
    [ 9.507917] Copyright (c) 1999-2006 Intel Corporation.
    [ 13.719989] kjournald starting. Commit interval 5 seconds
    [ 13.719989] EXT3-fs: mounted filesystem with ordered data mode.
    [ 22.084790] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
    [ 22.084790] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x1060)
    [ 22.084790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 22.088581] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
    [ 22.088581] e1000e: Copyright (c) 1999-2008 Intel Corporation.
    [ 22.088581] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 22.088581] e1000e 0000:06:00.0: setting latency timer to 64
    [ 22.104790] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 22.163954] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:14
    [ 22.163954] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 22.163954] 0000:06:00.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff
    [ 22.163954] e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 22.163954] e1000e 0000:06:00.1: setting latency timer to 64
    [ 22.240623] 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:e0:81:b0:84:15
    [ 22.240623] 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection
    [ 22.240623] 0000:06:00.1: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff
    [ 116.458114] EXT3 FS on sda3, internal journal
    [ 116.601448] SMsC 37B787 watchdog component driver 1.1 initialising...
    [ 116.601448] smsc37b787_wdt: Unable to register miscdev on minor 130
    [ 117.221031] XFS mounting filesystem sda4
    [ 117.301234] Ending clean XFS mount for filesystem: sda4
    [ 117.421000] Adding 31999992k swap on /dev/sda2. Priority:-1 extents:1 across:31999992k
    [ 120.787905] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 123.537072] 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None
    [ 123.540197] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 134.356662] eth0: no IPv6 routers present
    [ 155.953259] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 155.953944] NFSD: starting 90-second grace period
    \
     
     \ /
      Last update: 2008-08-21 22:59    [W:0.087 / U:30.452 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site