lkml.org 
[lkml]   [2008]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ATA Kconfig cleanup: sort the driver list and modify some text
Date
On Sat, 16 Aug 2008 11:32:24 +0100, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:

>> I suspect sata_via will want this too.
>
>Lust about any PATA chip may be on boards with SATA bridges so the divide
>doesn't really work.

Okay, following patch is just the driver sort and text changes. I have a
4/3 fixup patch for the last lot but suspect it's a lost cause.

Grant.

From: Grant Coady <gcoady.lk@gmail.com>

ATA Kconfig cleanup: Sort the driver list, and some text changes.

Sort the ATA_SFF driver list, and modify some text for consistency,
break a couple long lines, remove the 'prod' and 'experimental' text
from the menu name.

Signed-off-by: Grant Coady <gcoady.lk@gmail.com>

---
Kconfig | 465 ++++++++++++++++++++++++++++++++--------------------------------
1 files changed, 234 insertions(+), 231 deletions(-)

--- linux-2.6.27-rc3a/drivers/ata/Kconfig 2008-07-14 07:51:29.000000000 +1000
+++ linux-2.6.27-rc3c/drivers/ata/Kconfig 2008-08-18 11:29:20.871422237 +1000
@@ -3,7 +3,7 @@
#

menuconfig ATA
- tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
+ tristate "Serial ATA and Parallel ATA (SATA/PATA) drivers"
depends on HAS_IOMEM
depends on BLOCK
depends on !(M32R || M68K) || BROKEN
@@ -56,14 +56,6 @@

If unsure, say N.

-config SATA_SIL24
- tristate "Silicon Image 3124/3132 SATA support"
- depends on PCI
- help
- This option enables support for Silicon Image 3124/3132 Serial ATA.
-
- If unsure, say N.
-
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
@@ -73,6 +65,14 @@

If unsure, say N.

+config SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on PCI
+ help
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
+
+ If unsure, say N.
+
config ATA_SFF
bool "ATA SFF support"
default y
@@ -93,123 +93,15 @@

if ATA_SFF

-config SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support"
- depends on PCI
- help
- This option enables support for Broadcom/Serverworks/Apple K2
- SATA support.
-
- If unsure, say N.
-
-config ATA_PIIX
- tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
- depends on PCI
- help
- This option enables support for ICH5/6/7/8 Serial ATA
- and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
- host controllers.
-
- If unsure, say N.
-
-config SATA_MV
- tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- This option enables support for the Marvell Serial ATA family.
- Currently supports 88SX[56]0[48][01] chips.
-
- If unsure, say N.
-
-config SATA_NV
- tristate "NVIDIA SATA support"
- depends on PCI
- help
- This option enables support for NVIDIA Serial ATA.
-
- If unsure, say N.
-
-config PDC_ADMA
- tristate "Pacific Digital ADMA support"
- depends on PCI
- help
- This option enables support for Pacific Digital ADMA controllers
-
- If unsure, say N.
-
-config SATA_QSTOR
- tristate "Pacific Digital SATA QStor support"
- depends on PCI
- help
- This option enables support for Pacific Digital Serial ATA QStor.
-
- If unsure, say N.
-
-config SATA_PROMISE
- tristate "Promise SATA TX2/TX4 support"
- depends on PCI
- help
- This option enables support for Promise Serial ATA TX2/TX4.
-
- If unsure, say N.
-
-config SATA_SX4
- tristate "Promise SATA SX4 support"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for Promise Serial ATA SX4.
-
- If unsure, say N.
-
-config SATA_SIL
- tristate "Silicon Image SATA support"
- depends on PCI
- help
- This option enables support for Silicon Image Serial ATA.
-
- If unsure, say N.
-
-config SATA_SIS
- tristate "SiS 964/965/966/180 SATA support"
- depends on PCI
- select PATA_SIS
- help
- This option enables support for SiS Serial ATA on
- SiS 964/965/966/180 and Parallel ATA on SiS 180.
- The PATA support for SiS 180 requires additionally to
- enable the PATA_SIS driver in the config.
- If unsure, say N.
-
-config SATA_ULI
- tristate "ULi Electronics SATA support"
- depends on PCI
- help
- This option enables support for ULi Electronics SATA.
-
- If unsure, say N.
-
-config SATA_VIA
- tristate "VIA SATA support"
- depends on PCI
- help
- This option enables support for VIA Serial ATA.
-
- If unsure, say N.
-
-config SATA_VITESSE
- tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
- depends on PCI
+config PATA_ICSIDE
+ tristate "Acorn ICS PATA support"
+ depends on ARM && ARCH_ACORN
help
- This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
+ On Acorn systems, say Y here if you wish to use the ICS PATA
+ interface card. This is not required for ICS partition support.

If unsure, say N.

-config SATA_INIC162X
- tristate "Initio 162x SATA support"
- depends on PCI
- help
- This option enables support for Initio 162x Serial ATA.
-
config PATA_ACPI
tristate "ACPI firmware driver for PATA"
depends on ATA_ACPI
@@ -263,6 +155,15 @@

If unsure, say N.

+config PATA_BF54X
+ tristate "Blackfin 54x ATAPI support"
+ depends on BF542 || BF548 || BF549
+ help
+ This option enables support for the built-in ATAPI controller on
+ Blackfin 54x family chips.
+
+ If unsure, say N.
+
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
@@ -282,6 +183,23 @@

If unsure, say N.

+config PATA_SIL680
+ tristate "CMD / Silicon Image 680 PATA support"
+ depends on PCI
+ help
+ This option enables support for CMD / Silicon Image 680 PATA.
+
+ If unsure, say N.
+
+config PATA_TRIFLEX
+ tristate "Compaq Triflex PATA support"
+ depends on PCI
+ help
+ Enable support for the Compaq 'Triflex' IDE controller as found
+ on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_CS5520
tristate "CS5510/5520 PATA support"
depends on PCI
@@ -336,6 +254,15 @@

If unsure, say N.

+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
config ATA_GENERIC
tristate "Generic ATA support"
depends on PCI
@@ -345,6 +272,23 @@

If unsure, say N.

+config PATA_HPT3X3
+ tristate "HPT 343/363 PATA support"
+ depends on PCI
+ help
+ This option enables support for the HPT 343/363
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
+config PATA_HPT3X3_DMA
+ bool "HPT 343/363 DMA support (Experimental)"
+ depends on PATA_HPT3X3
+ help
+ This option enables DMA support for the HPT343/363
+ controllers. Enable with care as there are still some
+ problems with DMA on this chipset.
+
config PATA_HPT366
tristate "HPT 366/368 PATA support"
depends on PCI
@@ -372,22 +316,46 @@

If unsure, say N.

-config PATA_HPT3X3
- tristate "HPT 343/363 PATA support"
+config SATA_INIC162X
+ tristate "Initio 162x SATA support"
depends on PCI
help
- This option enables support for the HPT 343/363
- PATA controllers via the new ATA layer
+ This option enables support for Initio 162x Serial ATA.
+
+config ATA_PIIX
+ tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
+ depends on PCI
+ help
+ This option enables support for ICH5 or later Serial ATA
+ and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
+ host controllers.

If unsure, say N.

-config PATA_HPT3X3_DMA
- bool "HPT 343/363 DMA support (Experimental)"
- depends on PATA_HPT3X3
+config PATA_MPIIX
+ tristate "Intel PATA MPIIX support"
+ depends on PCI
help
- This option enables DMA support for the HPT343/363
- controllers. Enable with care as there are still some
- problems with DMA on this chipset.
+ This option enables support for MPIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_OLDPIIX
+ tristate "Intel PATA old PIIX support"
+ depends on PCI
+ help
+ This option enables support for early PIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_SCH
+ tristate "Intel SCH PATA support"
+ depends on PCI
+ help
+ This option enables support for Intel SCH PATA on the Intel
+ SCH (US15W, US15L, UL11L) series host controllers.
+
+ If unsure, say N.

config PATA_ISAPNP
tristate "ISA Plug and Play PATA support (Experimental)"
@@ -417,6 +385,16 @@

If unsure, say N.

+config PATA_IXP4XX_CF
+ tristate "IXP4XX Compact Flash support"
+ depends on ARCH_IXP4XX
+ help
+ This option enables support for a Compact Flash connected on
+ the ixp4xx expansion bus. This driver had been written for
+ Loft/Avila boards in mind but can work with others.
+
+ If unsure, say N.
+
config PATA_JMICRON
tristate "JMicron PATA support"
depends on PCI
@@ -435,15 +413,6 @@

If unsure, say N.

-config PATA_TRIFLEX
- tristate "Compaq Triflex PATA support"
- depends on PCI
- help
- Enable support for the Compaq 'Triflex' IDE controller as found
- on many Compaq Pentium-Pro systems, via the new ATA layer.
-
- If unsure, say N.
-
config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
depends on PCI
@@ -453,28 +422,30 @@

If unsure, say N.

-config PATA_MPC52xx
- tristate "Freescale MPC52xx SoC internal IDE"
- depends on PPC_MPC52xx
+config SATA_MV
+ tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
+ depends on EXPERIMENTAL
help
- This option enables support for integrated IDE controller
- of the Freescale MPC52xx SoC.
+ This option enables support for the Marvell Serial ATA family.
+ Currently supports 88SX[56]0[48][01] chips.

If unsure, say N.

-config PATA_MPIIX
- tristate "Intel PATA MPIIX support"
- depends on PCI
+config PATA_NS87410
+ tristate "Nat Semi NS87410 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
help
- This option enables support for MPIIX PATA support.
+ This option enables support for the National Semiconductor
+ NS87410 PCI-IDE controller.

If unsure, say N.

-config PATA_OLDPIIX
- tristate "Intel PATA old PIIX support"
- depends on PCI
+config PATA_NS87415
+ tristate "Nat Semi NS87415 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
help
- This option enables support for early PIIX PATA support.
+ This option enables support for the National Semiconductor
+ NS87415 PCI-IDE controller.

If unsure, say N.

@@ -496,21 +467,11 @@

If unsure, say N.

-config PATA_NS87410
- tristate "Nat Semi NS87410 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for the National Semiconductor
- NS87410 PCI-IDE controller.
-
- If unsure, say N.
-
-config PATA_NS87415
- tristate "Nat Semi NS87415 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+config SATA_NV
+ tristate "NVIDIA SATA support"
+ depends on PCI
help
- This option enables support for the National Semiconductor
- NS87415 PCI-IDE controller.
+ This option enables support for NVIDIA Serial ATA.

If unsure, say N.

@@ -533,6 +494,31 @@

If unsure, say N.

+config PDC_ADMA
+ tristate "Pacific Digital ADMA support"
+ depends on PCI
+ help
+ This option enables support for Pacific Digital ADMA controllers
+
+ If unsure, say N.
+
+config SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on PCI
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
+config PATA_RZ1000
+ tristate "PC Tech RZ1000 PATA support"
+ depends on PCI
+ help
+ This option enables basic support for the PC Tech RZ1000/1
+ PATA controllers via the new ATA layer
+
+ If unsure, say N.
+
config PATA_PCMCIA
tristate "PCMCIA PATA support"
depends on PCMCIA
@@ -542,8 +528,17 @@

If unsure, say N.

+config PATA_PDC2027X
+ tristate "Promise PATA 2027x support"
+ depends on PCI
+ help
+ This option enables support for Promise PATA pdc20268 to
+ pdc20277 host adapters.
+
+ If unsure, say N.
+
config PATA_PDC_OLD
- tristate "Older Promise PATA controller support (Experimental)"
+ tristate "Promise older PATA controller support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the Promise 20246, 20262, 20263,
@@ -551,6 +546,22 @@

If unsure, say N.

+config SATA_SX4
+ tristate "Promise SATA SX4 support"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for Promise Serial ATA SX4.
+
+ If unsure, say N.
+
+config SATA_PROMISE
+ tristate "Promise SATA TX2/TX4 support"
+ depends on PCI
+ help
+ This option enables support for Promise Serial ATA TX2/TX4.
+
+ If unsure, say N.
+
config PATA_QDI
tristate "QDI VLB PATA support"
depends on ISA
@@ -575,15 +586,6 @@

If unsure, say N.

-config PATA_RZ1000
- tristate "PC Tech RZ1000 PATA support"
- depends on PCI
- help
- This option enables basic support for the PC Tech RZ1000/1
- PATA controllers via the new ATA layer
-
- If unsure, say N.
-
config PATA_SC1200
tristate "SC1200 PATA support (Very Experimental)"
depends on PCI && EXPERIMENTAL
@@ -593,8 +595,17 @@

If unsure, say N.

+config SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on PCI
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
config PATA_SERVERWORKS
- tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
+ tristate "ServerWorks OSB4/CSB5/CSB6/HT1000 PATA support"
depends on PCI
help
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
@@ -602,20 +613,23 @@

If unsure, say N.

-config PATA_PDC2027X
- tristate "Promise PATA 2027x support"
+config SATA_SIL
+ tristate "Silicon Image SATA support"
depends on PCI
help
- This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
+ This option enables support for Silicon Image Serial ATA.

If unsure, say N.

-config PATA_SIL680
- tristate "CMD / Silicon Image 680 PATA support"
+config SATA_SIS
+ tristate "SiS 964/965/966/180 SATA support"
depends on PCI
+ select PATA_SIS
help
- This option enables support for CMD / Silicon Image 680 PATA.
-
+ This option enables support for SiS Serial ATA on
+ SiS 964/965/966/180 and Parallel ATA on SiS 180.
+ The PATA support for SiS 180 requires additionally to
+ enable the PATA_SIS driver in the config.
If unsure, say N.

config PATA_SIS
@@ -626,6 +640,23 @@

If unsure, say N.

+config PATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_CELLEB
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
+config SATA_ULI
+ tristate "ULi Electronics SATA support"
+ depends on PCI
+ help
+ This option enables support for ULi Electronics SATA.
+
+ If unsure, say N.
+
config PATA_VIA
tristate "VIA PATA support"
depends on PCI
@@ -635,6 +666,23 @@

If unsure, say N.

+config SATA_VIA
+ tristate "VIA SATA support"
+ depends on PCI
+ help
+ This option enables support for VIA Serial ATA.
+
+ If unsure, say N.
+
+config SATA_VITESSE
+ tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
+ depends on PCI
+ help
+ This option enables support for Vitesse VSC7174 and
+ Intel 31244 Serial ATA.
+
+ If unsure, say N.
+
config PATA_WINBOND
tristate "Winbond SL82C105 PATA support"
depends on PCI
@@ -678,50 +726,5 @@

If unsure, say N.

-config PATA_ICSIDE
- tristate "Acorn ICS PATA support"
- depends on ARM && ARCH_ACORN
- help
- On Acorn systems, say Y here if you wish to use the ICS PATA
- interface card. This is not required for ICS partition support.
- If you are unsure, say N to this.
-
-config PATA_IXP4XX_CF
- tristate "IXP4XX Compact Flash support"
- depends on ARCH_IXP4XX
- help
- This option enables support for a Compact Flash connected on
- the ixp4xx expansion bus. This driver had been written for
- Loft/Avila boards in mind but can work with others.
-
- If unsure, say N.
-
-config PATA_SCC
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_CELLEB
- help
- This option enables support for the built-in IDE controller on
- Toshiba Cell Reference Board.
-
- If unsure, say N.
-
-config PATA_SCH
- tristate "Intel SCH PATA support"
- depends on PCI
- help
- This option enables support for Intel SCH PATA on the Intel
- SCH (US15W, US15L, UL11L) series host controllers.
-
- If unsure, say N.
-
-config PATA_BF54X
- tristate "Blackfin 54x ATAPI support"
- depends on BF542 || BF548 || BF549
- help
- This option enables support for the built-in ATAPI controller on
- Blackfin 54x family chips.
-
- If unsure, say N.
-
endif # ATA_SFF
endif # ATA

\
 
 \ /
  Last update: 2008-08-18 03:51    [W:0.374 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site