lkml.org 
[lkml]   [2008]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Power management for SCSI
On Wed, 13 Aug 2008, Oliver Neukum wrote:

> Very well. I see a basic problem here. For USB it is necessary that child
> devices be suspended before anything higher up in the tree is suspended.
> SATA seems to be able to power down a link while the device is not suspended.

Is the USB transport unique in its requirement that all the child
devices must be suspended before the link can be powered down? Maybe
that requirement should be made an explicit property of the transport
or the transport class.

> In fact in true SCSI busses can be shared. So are we using the correct
> approach?

This is a good question. Most USB mass-storage devices do not act as a
true SCSI bus, but I believe there are a few non-standard ones that do
-- the USB device really contains a SCSI host and arbitrary SCSI
targets can be attached to it. For the moment, we should be safe
enough using a model in which there are no other initiators on a
USB-type SCSI transport, but it's something to keep in mind.

Alan Stern



\
 
 \ /
  Last update: 2008-08-13 17:03    [W:0.156 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site