lkml.org 
[lkml]   [2008]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: linux-next: Tree for July 8 (ns8390)
Diff between my tree 8390 bits and linux-next ones

8390: diff between next and my driver

From: Alan Cox <alan@redhat.com>

Please try this and if it sorts it fold it into the driver. This is a diff
between my tree and the linux-next tree
---
drivers/net/hp-plus.c | 2 +-
drivers/net/hp.c | 2 +-
drivers/net/ne.c | 8 ++++----
drivers/net/wd.c | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index c2c4f49..8239939 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -262,7 +262,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr)
}

outw(Perf_Page, ioaddr + HP_PAGING);
- NS8390_init(dev, 0);
+ NS8390p_init(dev, 0);
/* Leave the 8390 and HP chip reset. */
outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);

diff --git a/drivers/net/hp.c b/drivers/net/hp.c
index 8281209..0a8c649 100644
--- a/drivers/net/hp.c
+++ b/drivers/net/hp.c
@@ -389,7 +389,7 @@ static void __init
hp_init_card(struct net_device *dev)
{
int irq = dev->irq;
- NS8390_init(dev, 0);
+ NS8390p_init(dev, 0);
outb_p(irqmap[irq&0x0f] | HP_RUN,
dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
return;
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 1412697..4a8a4b1 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -355,7 +355,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
}

/* Read the 16 bytes of station address PROM.
- We must first initialize registers, similar to NS8390_init(eifdev, 0).
+ We must first initialize registers, similar to NS8390p_init(eifdev, 0).
We can't reliably read the SAPROM address without this.
(I learned the hard way!). */
{
@@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = eip_poll;
#endif
- NS8390_init(dev, 0);
+ NS8390p_init(dev, 0);

ret = register_netdev(dev);
if (ret)
@@ -794,7 +794,7 @@ retry:
if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
ne_reset_8390(dev);
- NS8390_init(dev,1);
+ NS8390p_init(dev,1);
break;
}

@@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev)

if (netif_running(dev)) {
ne_reset_8390(dev);
- NS8390_init(dev, 1);
+ NS8390p_init(dev, 1);
netif_device_attach(dev);
}
return 0;
diff --git a/drivers/net/wd.c b/drivers/net/wd.c
index fa14255..6f9aa16 100644
--- a/drivers/net/wd.c
+++ b/drivers/net/wd.c
@@ -337,7 +337,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr)
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = ei_poll;
#endif
- NS8390_init(dev, 0);
+ NS8390p_init(dev, 0);

#if 1
/* Enable interrupt generation on softconfig cards -- M.U */

\
 
 \ /
  Last update: 2008-07-08 21:11    [W:0.163 / U:0.456 seconds]
©2003-2014 Jasper Spaans. Advertise on this site