lkml.org 
[lkml]   [2008]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Lots of con-current I/O = resets SATA link? (2.6.25.10)


On Sat, 5 Jul 2008, Robert Hancock wrote:

> Justin Piszcz wrote:
>>> Can you post your dmesg from bootup with the controller/drive detection?
>
> So you've got 6 drives in the machine. Intel chipsets normally seem pretty
> robust with AHCI.
>
> Are you certain that your machine has enough power to run all those drives
> properly? We've seen in a number of cases that power fluctuations or noise
> can cause these kinds of errors.

I have a 650watt PSU (nice antec one) and the power draw of the box is
~148watts w/ veliciraptors, ~250 when fully load all 4 cores + all 12
disks writing. I have turned off the irqbalance daemon and I am going to
see if the problem re-occurs.

Justin.


\
 
 \ /
  Last update: 2008-07-06 01:27    [W:0.055 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site