lkml.org 
[lkml]   [2008]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] add per_cpu_dyn_array support
Date

so could make array in per_cpu is allocated dynamically too

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
arch/x86/kernel/setup_percpu.c | 7 +++-
include/asm-generic/vmlinux.lds.h | 6 ++++
include/linux/init.h | 27 ++++++++++++++++--
init/main.c | 57 ++++++++++++++++++++++++++++++++++++++
4 files changed, 92 insertions(+), 5 deletions(-)
Index: linux-2.6/arch/x86/kernel/setup_percpu.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_percpu.c
+++ linux-2.6/arch/x86/kernel/setup_percpu.c
@@ -140,7 +140,7 @@ static void __init setup_cpu_pda_map(voi
*/
void __init setup_per_cpu_areas(void)
{
- ssize_t size = PERCPU_ENOUGH_ROOM;
+ ssize_t size, old_size;
char *ptr;
int cpu;

@@ -148,7 +148,8 @@ void __init setup_per_cpu_areas(void)
setup_cpu_pda_map();

/* Copy section for each CPU (we discard the original) */
- size = PERCPU_ENOUGH_ROOM;
+ old_size = PERCPU_ENOUGH_ROOM;
+ size = old_size + per_cpu_dyn_array_size();
printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
size);

@@ -176,6 +177,8 @@ void __init setup_per_cpu_areas(void)
per_cpu_offset(cpu) = ptr - __per_cpu_start;
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);

+ per_cpu_alloc_dyn_array(cpu, ptr + old_size);
+
}

printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n",
Index: linux-2.6/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-2.6.orig/include/asm-generic/vmlinux.lds.h
+++ linux-2.6/include/asm-generic/vmlinux.lds.h
@@ -220,6 +220,12 @@
VMLINUX_SYMBOL(__dyn_array_start) = .; \
*(.dyn_array.init) \
VMLINUX_SYMBOL(__dyn_array_end) = .; \
+ } \
+ . = ALIGN((align)); \
+ .per_cpu_dyn_array.init : AT(ADDR(.per_cpu_dyn_array.init) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__per_cpu_dyn_array_start) = .; \
+ *(.per_cpu_dyn_array.init) \
+ VMLINUX_SYMBOL(__per_cpu_dyn_array_end) = .; \
}
#define SECURITY_INIT \
.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
Index: linux-2.6/include/linux/init.h
===================================================================
--- linux-2.6.orig/include/linux/init.h
+++ linux-2.6/include/linux/init.h
@@ -258,12 +258,13 @@ struct dyn_array {
void (*init_work)(void *);
};
extern struct dyn_array *__dyn_array_start[], *__dyn_array_end[];
+extern struct dyn_array *__per_cpu_dyn_array_start[], *__per_cpu_dyn_array_end[];

-#define DEFINE_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+#define DEFINE_DYN_ARRAY_ADDR(nameX, addrX, sizeX, nrX, alignX, init_workX) \
static struct dyn_array __dyn_array_##nameX __initdata = \
- { .name = (void **)&nameX,\
+ { .name = (void **)&(nameX),\
.size = sizeX,\
- .nr = &nrX,\
+ .nr = &(nrX),\
.align = alignX,\
.init_work = init_workX,\
}; \
@@ -271,7 +272,27 @@ extern struct dyn_array *__dyn_array_sta
__attribute__((__section__(".dyn_array.init"))) = \
&__dyn_array_##nameX

+#define DEFINE_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+ DEFINE_DYN_ARRAY_ADDR(nameX, nameX, sizeX, nrX, alignX, init_workX)
+
+#define DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, addrX, sizeX, nrX, alignX, init_workX) \
+ static struct dyn_array __per_cpu_dyn_array_##nameX __initdata = \
+ { .name = (void **)&(addrX),\
+ .size = sizeX,\
+ .nr = &(nrX),\
+ .align = alignX,\
+ .init_work = init_workX,\
+ }; \
+ static struct dyn_array *__per_cpu_dyn_array_ptr_##nameX __used \
+ __attribute__((__section__(".per_cpu_dyn_array.init"))) = \
+ &__per_cpu_dyn_array_##nameX
+
+#define DEFINE_PER_CPU_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+ DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, nameX, nrX, alignX, init_workX)
+
extern void pre_alloc_dyn_array(void);
+extern unsigned long per_cpu_dyn_array_size(void);
+extern void per_cpu_alloc_dyn_array(int cpu, char *ptr);
#endif /* __ASSEMBLY__ */

/**
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c
+++ linux-2.6/init/main.c
@@ -562,6 +562,63 @@ void pre_alloc_dyn_array(void)
#endif
}

+unsigned long per_cpu_dyn_array_size(void)
+{
+ unsigned long total_size = 0;
+#ifdef CONFIG_HAVE_DYN_ARRAY
+ unsigned long size;
+ struct dyn_array **daa;
+
+ for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
+ struct dyn_array *da = *daa;
+
+ size = da->size * (*da->nr);
+ print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
+ printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
+ da->size, *da->nr, da->align);
+ total_size += roundup(size, da->align);
+ }
+ if (total_size)
+ printk(KERN_DEBUG "per_cpu_dyna_array total_size: %#lx\n",
+ total_size);
+#endif
+ return total_size;
+}
+
+void per_cpu_alloc_dyn_array(int cpu, char *ptr)
+{
+#ifdef CONFIG_HAVE_DYN_ARRAY
+ unsigned long size, phys;
+ struct dyn_array **daa;
+ unsigned long addr;
+ void **array;
+
+ phys = virt_to_phys(ptr);
+
+ for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
+ struct dyn_array *da = *daa;
+
+ size = da->size * (*da->nr);
+ print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
+ printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
+ da->size, *da->nr, da->align);
+
+ phys = roundup(phys, da->align);
+ addr = (unsigned long)da->name;
+ addr += per_cpu_offset(cpu);
+ array = (void **)addr;
+ *array = phys_to_virt(phys);
+ *da->name = *array; /* so init_work could use it directly */
+ printk(KERN_CONT " %p ==> [%#lx - %#lx]\n", array, phys, phys + size);
+ phys += size;
+
+ if (da->init_work) {
+ da->init_work(da);
+ }
+ }
+#endif
+}
+
asmlinkage void __init start_kernel(void)
{
char * command_line;

\
 
 \ /
  Last update: 2008-07-31 06:17    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site