lkml.org 
[lkml]   [2008]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 21/30] W1: ds2490.c ds_write_bit, grouping error, disable readback
ds_write_bit doesn't read the input buffer, so add COMM_ICP and a
comment that it will no longer generate a read back data byte. If
there is an extra data byte later on then it will cause an error and
discard what data was there. Corrected operator ordering for
ds_send_control.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
---
drivers/w1/masters/ds2490.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 6b188e8..6fabf58 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -525,7 +525,12 @@ static int ds_write_bit(struct ds_device *dev, u8 bit)
int err;
struct ds_status st;

- err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0);
+ /* Set COMM_ICP to write without a readback. Note, this will
+ * produce one time slot, a down followed by an up with COMM_D
+ * only determing the timing.
+ */
+ err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_ICP |
+ (bit ? COMM_D : 0), 0);
if (err)
return err;

--
1.4.4.4

\
 
 \ /
  Last update: 2008-07-31 04:59    [from the cache]
©2003-2011 Jasper Spaans