lkml.org 
[lkml]   [2008]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] x86: add apic probe for genapic 64bit
Date


so remove uv, x2apic related code from genapic_64.c to their specific
genapic files

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
arch/x86/kernel/genapic_64.c | 87 +++++++++++-------------------------
arch/x86/kernel/genapic_flat_64.c | 24 +++++++++
arch/x86/kernel/genx2apic_cluster.c | 11 ++++
arch/x86/kernel/genx2apic_phys.c | 21 ++++++++
arch/x86/kernel/genx2apic_uv_x.c | 32 ++++++++++++-
include/asm-x86/genapic_64.h | 1
6 files changed, 115 insertions(+), 61 deletions(-)

Index: linux-2.6/arch/x86/kernel/genapic_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/genapic_64.c
+++ linux-2.6/arch/x86/kernel/genapic_64.c
@@ -16,62 +16,37 @@
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
-#include <linux/dmar.h>

#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>

-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-
-DEFINE_PER_CPU(int, x2apic_extra_bits);
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2xpic_uv_x;
+extern struct genapic apic_x2apic_phys;
+extern struct genapic apic_x2apic_cluster;

struct genapic __read_mostly *genapic = &apic_flat;

-static int x2apic_phys = 0;
-
-static int set_x2apic_phys_mode(char *arg)
-{
- x2apic_phys = 1;
- return 0;
-}
-early_param("x2apic_phys", set_x2apic_phys_mode);
-
-static enum uv_system_type uv_system_type;
+static struct genapic *apic_probe[] __initdata = {
+ &apic_x2apic_uv_x,
+ &apic_x2apic_phys,
+ &apic_x2apic_cluster,
+ &apic_physflat,
+ NULL,
+};

/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
void __init setup_apic_routing(void)
{
- if (uv_system_type == UV_NON_UNIQUE_APIC)
- genapic = &apic_x2apic_uv_x;
- else if (cpu_has_x2apic && intr_remapping_enabled) {
- if (x2apic_phys)
- genapic = &apic_x2apic_phys;
- else
- genapic = &apic_x2apic_cluster;
- } else
-#ifdef CONFIG_ACPI
- /*
- * Quirk: some x86_64 machines can only use physical APIC mode
- * regardless of how many processors are present (x86_64 ES7000
- * is an example).
- */
- if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
- genapic = &apic_physflat;
- else
-#endif
-
- if (max_physical_apicid < 8)
- genapic = &apic_flat;
- else
- genapic = &apic_physflat;
-
- printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+ if (genapic == &apic_flat) {
+ if (max_physical_apicid >= 8)
+ genapic = &apic_physflat;
+ printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+ }
}

/* Same for both flat and physical. */
@@ -83,23 +58,15 @@ void apic_send_IPI_self(int vector)

int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- if (!strcmp(oem_id, "SGI")) {
- if (!strcmp(oem_table_id, "UVL"))
- uv_system_type = UV_LEGACY_APIC;
- else if (!strcmp(oem_table_id, "UVX"))
- uv_system_type = UV_X2APIC;
- else if (!strcmp(oem_table_id, "UVH"))
- uv_system_type = UV_NON_UNIQUE_APIC;
- }
- return 0;
-}
-
-enum uv_system_type get_uv_system_type(void)
-{
- return uv_system_type;
-}
+ int i;

-int is_uv_system(void)
-{
- return uv_system_type != UV_NONE;
+ for (i = 0; apic_probe[i]; ++i) {
+ if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Setting APIC routing to %s.\n",
+ genapic->name);
+ return 1;
+ }
+ }
+ return 0;
}
Index: linux-2.6/arch/x86/kernel/genapic_flat_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/genapic_flat_64.c
+++ linux-2.6/arch/x86/kernel/genapic_flat_64.c
@@ -21,6 +21,15 @@
#include <asm/genapic.h>
#include <mach_apicdef.h>

+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
+
+static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return 1;
+}
+
static cpumask_t flat_target_cpus(void)
{
return cpu_online_map;
@@ -138,6 +147,7 @@ static unsigned int phys_pkg_id(int inde

struct genapic apic_flat = {
.name = "flat",
+ .acpi_madt_oem_check = flat_acpi_madt_oem_check,
.int_delivery_mode = dest_LowestPrio,
.int_dest_mode = (APIC_DEST_LOGICAL != 0),
.target_cpus = flat_target_cpus,
@@ -160,6 +170,19 @@ struct genapic apic_flat = {
* We cannot use logical delivery in this case because the mask
* overflows, so use physical mode.
*/
+static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ /*
+ * Quirk: some x86_64 machines can only use physical APIC mode
+ * regardless of how many processors are present (x86_64 ES7000
+ * is an example).
+ */
+ if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+ (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
+ return 1;
+
+ return 0;
+}

static cpumask_t physflat_target_cpus(void)
{
@@ -206,6 +229,7 @@ static unsigned int physflat_cpu_mask_to

struct genapic apic_physflat = {
.name = "physical flat",
+ .acpi_madt_oem_check = physflat_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = physflat_target_cpus,
Index: linux-2.6/arch/x86/kernel/genx2apic_cluster.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/genx2apic_cluster.c
+++ linux-2.6/arch/x86/kernel/genx2apic_cluster.c
@@ -4,12 +4,22 @@
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
+#include <linux/dmar.h>
+
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>

DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);

+static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (cpu_has_x2apic && intr_remapping_enabled)
+ return 1;
+
+ return 0;
+}
+
/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */

static cpumask_t x2apic_target_cpus(void)
@@ -135,6 +145,7 @@ static void init_x2apic_ldr(void)

struct genapic apic_x2apic_cluster = {
.name = "cluster x2apic",
+ .acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.int_delivery_mode = dest_LowestPrio,
.int_dest_mode = (APIC_DEST_LOGICAL != 0),
.target_cpus = x2apic_target_cpus,
Index: linux-2.6/arch/x86/kernel/genx2apic_phys.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/genx2apic_phys.c
+++ linux-2.6/arch/x86/kernel/genx2apic_phys.c
@@ -4,10 +4,30 @@
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
+#include <linux/dmar.h>
+
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>

+DEFINE_PER_CPU(int, x2apic_extra_bits);
+
+static int x2apic_phys = 0;
+
+static int set_x2apic_phys_mode(char *arg)
+{
+ x2apic_phys = 1;
+ return 0;
+}
+early_param("x2apic_phys", set_x2apic_phys_mode);
+
+static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (cpu_has_x2apic && intr_remapping_enabled && x2apic_phys)
+ return 1;
+
+ return 0;
+}

/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */

@@ -122,6 +142,7 @@ void init_x2apic_ldr(void)

struct genapic apic_x2apic_phys = {
.name = "physical x2apic",
+ .acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = x2apic_target_cpus,
Index: linux-2.6/arch/x86/kernel/genx2apic_uv_x.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/genx2apic_uv_x.c
+++ linux-2.6/arch/x86/kernel/genx2apic_uv_x.c
@@ -27,6 +27,33 @@
#include <asm/uv/uv_hub.h>
#include <asm/uv/bios.h>

+static enum uv_system_type uv_system_type;
+
+static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!strcmp(oem_id, "SGI")) {
+ if (!strcmp(oem_table_id, "UVL"))
+ uv_system_type = UV_LEGACY_APIC;
+ else if (!strcmp(oem_table_id, "UVX"))
+ uv_system_type = UV_X2APIC;
+ else if (!strcmp(oem_table_id, "UVH")) {
+ uv_system_type = UV_NON_UNIQUE_APIC;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+enum uv_system_type get_uv_system_type(void)
+{
+ return uv_system_type;
+}
+
+int is_uv_system(void)
+{
+ return uv_system_type != UV_NONE;
+}
+
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);

@@ -153,7 +180,7 @@ static unsigned int get_apic_id(unsigned
return id;
}

-static long set_apic_id(unsigned int id)
+static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;

@@ -182,6 +209,7 @@ static void uv_send_IPI_self(int vector)

struct genapic apic_x2apic_uv_x = {
.name = "UV large system",
+ .acpi_madt_oem_check = uv_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = uv_target_cpus,
@@ -433,3 +461,5 @@ void __cpuinit uv_cpu_init(void)
if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
set_x2apic_extra_bits(uv_hub_info->pnode);
}
+
+
Index: linux-2.6/include/asm-x86/genapic_64.h
===================================================================
--- linux-2.6.orig/include/asm-x86/genapic_64.h
+++ linux-2.6/include/asm-x86/genapic_64.h
@@ -14,6 +14,7 @@

struct genapic {
char *name;
+ int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
u32 int_delivery_mode;
u32 int_dest_mode;
int (*apic_id_registered)(void);

\
 
 \ /
  Last update: 2008-07-22 03:39    [W:0.222 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site