lkml.org 
[lkml]   [2008]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ide: enable local IRQs in all handlers for TASKFILE_NO_DATA data phase
Date
It is already done by task_no_data_intr() and there is no reason
not to do it in other TASKFILE_NO_DATA data phase handlers.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-taskfile.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -126,7 +126,10 @@ EXPORT_SYMBOL_GPL(do_rw_taskfile);
static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- u8 stat = hwif->tp_ops->read_status(hwif);
+ u8 stat;
+
+ local_irq_enable_in_hardirq();
+ stat = hwif->tp_ops->read_status(hwif);

if (OK_STAT(stat, READY_STAT, BAD_STAT))
drive->mult_count = drive->mult_req;
@@ -147,6 +150,8 @@ static ide_startstop_t set_geometry_intr
int retries = 5;
u8 stat;

+ local_irq_enable_in_hardirq();
+
while (1) {
stat = hwif->tp_ops->read_status(hwif);
if ((stat & BUSY_STAT) == 0 || retries-- == 0)
@@ -170,7 +175,10 @@ static ide_startstop_t set_geometry_intr
static ide_startstop_t recal_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- u8 stat = hwif->tp_ops->read_status(hwif);
+ u8 stat;
+
+ local_irq_enable_in_hardirq();
+ stat = hwif->tp_ops->read_status(hwif);

if (!OK_STAT(stat, READY_STAT, BAD_STAT))
return ide_error(drive, "recal_intr", stat);

\
 
 \ /
  Last update: 2008-07-21 21:17    [W:0.030 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site