lkml.org 
[lkml]   [2008]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB

Hello,

> Ah... super strange. Can you please try to swap memory sticks around
> and see whether anything changes to rule out bad memory?

I tried the pata_pcmcia on 3(three) PC.but the result is same.
So I think the memory is good.

> Another
> possibility is DMA corrupting the memory and printk makes the timing
> different and dodges the bullet. Does putting msleep(100) in the
> pata_pcmcia init_one make any difference?

I tried the msleep , but it still does not work.

By the way,
If I delete the pata_pcmcia.ko from /lib/modules/...
and insert the ata pcmcia card,
only /sys/bus/pcmcia/devices/0.0 exist.

But if I install the pata_pcmcia.ko,
/sys/bus/pcmcia/devices/0.0 and
/sys/bus/pcmcia/devices/0.1 exist.

Maybe the sysfs or something like that
is the problem.

Best Regards
Komuro


\
 
 \ /
  Last update: 2008-07-12 04:47    [W:0.072 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site