lkml.org 
[lkml]   [2008]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[2.6 patch] m68k/atari/debug.c: possible cleanups
This patch contains the following possible cleanups:
- make the following needlessly global functions (always) static:
- atari_mfp_console_write()
- atari_scc_console_write()
- atari_midi_console_write()
- atari_init_mfp_port()
- atari_init_scc_port()
- atari_init_midi_port()
- #if 0 the following unused functions:
- atari_mfp_console_wait_key()
- atari_scc_console_wait_key()
- atari_midi_console_wait_key()
- remove the following unused variables:
- atari_MFP_init_done
- atari_SCC_init_done

Signed-off-by: Adrian Bunk <bunk@kernel.org>

---

arch/m68k/atari/debug.c | 37 +++++++------------------------------
1 file changed, 7 insertions(+), 30 deletions(-)

ba4a365b3f79824768f90a22034eb425a4c8f120 diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 043ddbc..702b15c 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -20,14 +20,6 @@
#include <asm/atarihw.h>
#include <asm/atariints.h>

-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-EXPORT_SYMBOL(atari_MFP_init_done);
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
-EXPORT_SYMBOL(atari_SCC_init_done);
-
/* Can be set somewhere, if a SCC master reset has already be done and should
* not be repeated; used by kgdb */
int atari_SCC_reset_done;
@@ -47,8 +39,8 @@ static inline void ata_mfp_out(char c)
mfp.usart_dta = c;
}

-void atari_mfp_console_write(struct console *co, const char *str,
- unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -66,8 +58,8 @@ static inline void ata_scc_out(char c)
scc.cha_b_data = c;
}

-void atari_scc_console_write(struct console *co, const char *str,
- unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -83,8 +75,8 @@ static inline void ata_midi_out(char c)
acia.mid_data = c;
}

-void atari_midi_console_write(struct console *co, const char *str,
- unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+ unsigned int count)
{
while (count--) {
if (*str == '\n')
@@ -136,7 +128,7 @@ static void atari_par_console_write(struct console *co, const char *str,
}
}

-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
int atari_mfp_console_wait_key(struct console *co)
{
while (!(mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
@@ -166,11 +158,7 @@ int atari_midi_console_wait_key(struct console *co)
* SCC serial ports. They're used by the debugging interface, kgdb, and the
* serial console code.
*/
-#ifndef CONFIG_SERIAL_CONSOLE
static void __init atari_init_mfp_port(int cflag)
-#else
-void atari_init_mfp_port(int cflag)
-#endif
{
/*
* timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
@@ -193,8 +181,6 @@ void atari_init_mfp_port(int cflag)
mfp.tim_dt_d = baud_table[baud];
mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
mfp.trn_stat |= 0x01; /* enable TX */
-
- atari_MFP_init_done = 1;
}

#define SCC_WRITE(reg, val) \
@@ -214,11 +200,7 @@ void atari_init_mfp_port(int cflag)
MFPDELAY(); \
} while (0)

-#ifndef CONFIG_SERIAL_CONSOLE
static void __init atari_init_scc_port(int cflag)
-#else
-void atari_init_scc_port(int cflag)
-#endif
{
extern int atari_SCC_reset_done;
static int clksrc_table[9] =
@@ -277,14 +259,9 @@ void atari_init_scc_port(int cflag)
SCC_WRITE(5, reg5 | 8);

atari_SCC_reset_done = 1;
- atari_SCC_init_done = 1;
}

-#ifndef CONFIG_SERIAL_CONSOLE
static void __init atari_init_midi_port(int cflag)
-#else
-void atari_init_midi_port(int cflag)
-#endif
{
int baud = cflag & CBAUD;
int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;


\
 
 \ /
  Last update: 2008-06-10 00:29    [W:0.034 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site