lkml.org 
[lkml]   [2008]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 0/39] Merge files at x86/lib
Date
Hey folks,

Here it goes a series of patch that merges some user-related files.
From x86/lib, delay.c, getuser.S, and putuser.S are merged. For the
last two of them, the accompanying include/asm-x86/uaccess.h is merged.
Or close to. There are some small leftovers, that are sufficiently
different to remain in its own files.
As for bisectability, all patches have been tested in more than 20
different configs for both i386 and x86_64, in the usual way (just
I'm testing in more configs now). If you find a build bug in this
series, please send me the offending config so I can add to my poll.
The diffstat and the one-big-patch follows at the end of this introductory
message.

Ingo, in the absence of any objections, you can pull this work from:

git://git.kernel.org/pub/scm/linux/kernel/git/glommer/linux-2.6-x86-integration.git master

into your tip/master tree



Thanks!

Glauber

------------------>
Glauber Costa (39):
Don't use size specifiers
provide delay loop for x86_64
use rdtscll in read_current_timer for i386.
explicitly use edx in const delay function.
integrate delay functions
use something common for both architectures
don't clobber r8 nor use rcx
don't use word-size specifiers
adapt x86_64 getuser functions
rename threadinfo to TI
Don't use word-size specifiers on getuser_64
introduce __ASM_REG macro
use _ASM_PTR instead of explicit word-size pointers
merge getuser asm functions
don't save ebx in putuser_32.S
user put_user_x instead of all variants.
clobber rbx in putuser_64.S
pass argument to putuser_64 functions in ax register.
change testing logic in putuser_64.S
replace function headers by macros
don't use word-size specifiers in putuser files
use macros from asm.h
merge putuser asm functions
commonize __range_not_ok
merge common parts of uaccess.
merge getuser
move __addr_ok to uaccess.h
use k modifier for 4-byte access.
mark x86_64 as having a working WP.
don't always use EFAULT on __put_user_size.
merge __put_user_asm and its user.
don't always use EFAULT on __get_user_size.
merge __get_user_asm and its users.
Be more explicit in __put_user_x
turn __put_user_check directly into put_user.
merge put_user
move __get_user and __put_user into uaccess.h
put movsl_mask into uaccess.h
define architectural characteristics in uaccess.h
arch/x86/Kconfig.cpu | 2 +-
arch/x86/ia32/ia32entry.S | 25 +-
arch/x86/kernel/asm-offsets_64.c | 2 +-
arch/x86/kernel/entry_64.S | 27 +-
arch/x86/kernel/tsc_64.c | 1 +
arch/x86/lib/Makefile | 4 +-
arch/x86/lib/copy_user_64.S | 4 +-
arch/x86/lib/{delay_32.c => delay.c} | 17 +-
arch/x86/lib/delay_64.c | 85 ------
arch/x86/lib/{getuser_64.S => getuser.S} | 87 +++---
arch/x86/lib/getuser_32.S | 78 -----
arch/x86/lib/{putuser_32.S => putuser.S} | 73 +++---
arch/x86/lib/putuser_64.S | 106 -------
include/asm-x86/asm.h | 9 +-
include/asm-x86/uaccess.h | 449 ++++++++++++++++++++++++++++++
include/asm-x86/uaccess_32.h | 422 ----------------------------
include/asm-x86/uaccess_64.h | 260 -----------------
17 files changed, 577 insertions(+), 1074 deletions(-)
rename arch/x86/lib/{delay_32.c => delay.c} (96%)
delete mode 100644 arch/x86/lib/delay_64.c
rename arch/x86/lib/{getuser_64.S => getuser.S} (53%)
delete mode 100644 arch/x86/lib/getuser_32.S
rename arch/x86/lib/{putuser_32.S => putuser.S} (54%)
delete mode 100644 arch/x86/lib/putuser_64.S
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index d5f04f9..99ec0fe 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -344,7 +344,7 @@ config X86_F00F_BUG

config X86_WP_WORKS_OK
def_bool y
- depends on X86_32 && !M386
+ depends on !M386

config X86_INVLPG
def_bool y
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 3aefbce..9bfea05 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -103,7 +103,7 @@ ENTRY(ia32_sysenter_target)
pushfq
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET rflags,0*/
- movl 8*3-THREAD_SIZE+threadinfo_sysenter_return(%rsp), %r10d
+ movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d
CFI_REGISTER rip,r10
pushq $__USER32_CS
CFI_ADJUST_CFA_OFFSET 8
@@ -123,8 +123,9 @@ ENTRY(ia32_sysenter_target)
.quad 1b,ia32_badarg
.previous
GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,threadinfo_status(%r10)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ orl $TS_COMPAT,TI_status(%r10)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%r10)
CFI_REMEMBER_STATE
jnz sysenter_tracesys
sysenter_do_call:
@@ -136,9 +137,9 @@ sysenter_do_call:
GET_THREAD_INFO(%r10)
cli
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,threadinfo_flags(%r10)
+ testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
jnz int_ret_from_sys_call
- andl $~TS_COMPAT,threadinfo_status(%r10)
+ andl $~TS_COMPAT,TI_status(%r10)
/* clear IF, that popfq doesn't enable interrupts early */
andl $~0x200,EFLAGS-R11(%rsp)
movl RIP-R11(%rsp),%edx /* User %eip */
@@ -230,8 +231,9 @@ ENTRY(ia32_cstar_target)
.quad 1b,ia32_badarg
.previous
GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,threadinfo_status(%r10)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ orl $TS_COMPAT,TI_status(%r10)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%r10)
CFI_REMEMBER_STATE
jnz cstar_tracesys
cstar_do_call:
@@ -243,9 +245,9 @@ cstar_do_call:
GET_THREAD_INFO(%r10)
cli
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,threadinfo_flags(%r10)
+ testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
jnz int_ret_from_sys_call
- andl $~TS_COMPAT,threadinfo_status(%r10)
+ andl $~TS_COMPAT,TI_status(%r10)
RESTORE_ARGS 1,-ARG_SKIP,1,1,1
movl RIP-ARGOFFSET(%rsp),%ecx
CFI_REGISTER rip,rcx
@@ -324,8 +326,9 @@ ENTRY(ia32_syscall)
this could be a problem. */
SAVE_ARGS 0,0,1
GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,threadinfo_status(%r10)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ orl $TS_COMPAT,TI_status(%r10)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%r10)
jnz ia32_tracesys
ia32_do_syscall:
cmpl $(IA32_NR_syscalls-1),%eax
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index a5bbec3..2fcc6ac 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -34,7 +34,7 @@ int main(void)
ENTRY(pid);
BLANK();
#undef ENTRY
-#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry))
+#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
ENTRY(flags);
ENTRY(addr_limit);
ENTRY(preempt_count);
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index c035b20..b79cfc9 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -277,13 +277,13 @@ ENTRY(ret_from_fork)
CFI_ADJUST_CFA_OFFSET -4
call schedule_tail
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
jnz rff_trace
rff_action:
RESTORE_REST
testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread?
je int_ret_from_sys_call
- testl $_TIF_IA32,threadinfo_flags(%rcx)
+ testl $_TIF_IA32,TI_flags(%rcx)
jnz int_ret_from_sys_call
RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
jmp ret_from_sys_call
@@ -352,7 +352,8 @@ ENTRY(system_call_after_swapgs)
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%rcx)
jnz tracesys
cmpq $__NR_syscall_max,%rax
ja badsys
@@ -371,7 +372,7 @@ sysret_check:
GET_THREAD_INFO(%rcx)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz sysret_careful
CFI_REMEMBER_STATE
@@ -455,10 +456,10 @@ int_ret_from_sys_call:
int_with_check:
LOCKDEP_SYS_EXIT_IRQ
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz int_careful
- andl $~TS_COMPAT,threadinfo_status(%rcx)
+ andl $~TS_COMPAT,TI_status(%rcx)
jmp retint_swapgs

/* Either reschedule or signal or syscall exit tracking needed. */
@@ -666,7 +667,7 @@ retint_with_reschedule:
movl $_TIF_WORK_MASK,%edi
retint_check:
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
CFI_REMEMBER_STATE
jnz retint_careful
@@ -764,7 +765,7 @@ retint_signal:
/* Returning to kernel space from exception. */
/* rcx: threadinfo. interrupts off. */
ENTRY(retexc_kernel)
- testl $HARDNMI_MASK,threadinfo_preempt_count(%rcx)
+ testl $HARDNMI_MASK,TI_preempt_count(%rcx)
jz retint_kernel /* Not nested over NMI ? */
testw $X86_EFLAGS_TF,EFLAGS-ARGOFFSET(%rsp) /* trap flag? */
jnz retint_kernel /*
@@ -782,9 +783,9 @@ ENTRY(retexc_kernel)
/* Returning to kernel space. Check if we need preemption */
/* rcx: threadinfo. interrupts off. */
ENTRY(retint_kernel)
- cmpl $0,threadinfo_preempt_count(%rcx)
+ cmpl $0,TI_preempt_count(%rcx)
jnz retint_restore_args
- bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+ bt $TIF_NEED_RESCHED,TI_flags(%rcx)
jnc retint_restore_args
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
@@ -945,7 +946,7 @@ paranoid_restore_no_nmi\trace:
jmp irq_return
paranoid_restore\trace:
GET_THREAD_INFO(%rcx)
- testl $HARDNMI_MASK,threadinfo_preempt_count(%rcx)
+ testl $HARDNMI_MASK,TI_preempt_count(%rcx)
jz paranoid_restore_no_nmi\trace /* Nested over NMI ? */
testw $X86_EFLAGS_TF,EFLAGS-0(%rsp) /* trap flag? */
jnz paranoid_restore_no_nmi\trace
@@ -953,7 +954,7 @@ paranoid_restore\trace:
INTERRUPT_RETURN_NMI_SAFE
paranoid_userspace\trace:
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%ebx
+ movl TI_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs\trace
movq %rsp,%rdi /* &pt_regs */
@@ -1051,7 +1052,7 @@ error_exit:
testl %eax,%eax
jne retexc_kernel
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
jnz retint_careful
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index 9898fb0..36ac46f 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -258,6 +258,7 @@ void __init tsc_calibrate(void)
out:
for_each_possible_cpu(cpu)
set_cyc2ns_scale(tsc_khz, cpu);
+ use_tsc_delay();
}

/*
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 84aa288..aa3fa41 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -4,9 +4,9 @@

obj-$(CONFIG_SMP) := msr-on-cpu.o

-lib-y := delay_$(BITS).o
+lib-y := delay.o
lib-y += thunk_$(BITS).o
-lib-y += usercopy_$(BITS).o getuser_$(BITS).o putuser_$(BITS).o
+lib-y += usercopy_$(BITS).o getuser.o putuser.o
lib-y += memcpy_$(BITS).o

ifeq ($(CONFIG_X86_32),y)
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index ee1c3f6..7eaaf01 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -40,7 +40,7 @@ ENTRY(copy_to_user)
movq %rdi,%rcx
addq %rdx,%rcx
jc bad_to_user
- cmpq threadinfo_addr_limit(%rax),%rcx
+ cmpq TI_addr_limit(%rax),%rcx
jae bad_to_user
xorl %eax,%eax /* clear zero flag */
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
@@ -65,7 +65,7 @@ ENTRY(copy_from_user)
movq %rsi,%rcx
addq %rdx,%rcx
jc bad_from_user
- cmpq threadinfo_addr_limit(%rax),%rcx
+ cmpq TI_addr_limit(%rax),%rcx
jae bad_from_user
movl $1,%ecx /* set zero flag */
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay.c
similarity index 96%
rename from arch/x86/lib/delay_32.c
rename to arch/x86/lib/delay.c
index ef69131..f456860 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay.c
@@ -29,7 +29,7 @@
/* simple loop based delay: */
static void delay_loop(unsigned long loops)
{
- __asm__ __volatile__(
+ asm volatile(
" test %0,%0 \n"
" jz 3f \n"
" jmp 1f \n"
@@ -38,9 +38,9 @@ static void delay_loop(unsigned long loops)
"1: jmp 2f \n"

".align 16 \n"
- "2: decl %0 \n"
+ "2: dec %0 \n"
" jnz 2b \n"
- "3: decl %0 \n"
+ "3: dec %0 \n"

: /* we don't need output */
:"a" (loops)
@@ -98,7 +98,7 @@ void use_tsc_delay(void)
int __devinit read_current_timer(unsigned long *timer_val)
{
if (delay_fn == delay_tsc) {
- rdtscl(*timer_val);
+ rdtscll(*timer_val);
return 0;
}
return -1;
@@ -108,31 +108,30 @@ void __delay(unsigned long loops)
{
delay_fn(loops);
}
+EXPORT_SYMBOL(__delay);

inline void __const_udelay(unsigned long xloops)
{
int d0;

xloops *= 4;
- __asm__("mull %0"
+ asm("mull %%edx"
:"=d" (xloops), "=&a" (d0)
:"1" (xloops), "0"
(cpu_data(raw_smp_processor_id()).loops_per_jiffy * (HZ/4)));

__delay(++xloops);
}
+EXPORT_SYMBOL(__const_udelay);

void __udelay(unsigned long usecs)
{
__const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
}
+EXPORT_SYMBOL(__udelay);

void __ndelay(unsigned long nsecs)
{
__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
-
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
deleted file mode 100644
index 4c441be..0000000
--- a/arch/x86/lib/delay_64.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Precise Delay Loops for x86-64
- *
- * Copyright (C) 1993 Linus Torvalds
- * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- *
- * The __delay function must _NOT_ be inlined as its execution time
- * depends wildly on alignment on many x86 processors.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/timex.h>
-#include <linux/preempt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <asm/delay.h>
-#include <asm/msr.h>
-
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-int __devinit read_current_timer(unsigned long *timer_value)
-{
- rdtscll(*timer_value);
- return 0;
-}
-
-void __delay(unsigned long loops)
-{
- unsigned bclock, now;
- int cpu;
-
- preempt_disable();
- cpu = smp_processor_id();
- rdtscl(bclock);
- for (;;) {
- rdtscl(now);
- if ((now - bclock) >= loops)
- break;
-
- /* Allow RT tasks to run */
- preempt_enable();
- rep_nop();
- preempt_disable();
-
- /*
- * It is possible that we moved to another CPU, and
- * since TSC's are per-cpu we need to calculate
- * that. The delay must guarantee that we wait "at
- * least" the amount of time. Being moved to another
- * CPU could make the wait longer but we just need to
- * make sure we waited long enough. Rebalance the
- * counter for this CPU.
- */
- if (unlikely(cpu != smp_processor_id())) {
- loops -= (now - bclock);
- cpu = smp_processor_id();
- rdtscl(bclock);
- }
- }
- preempt_enable();
-}
-EXPORT_SYMBOL(__delay);
-
-inline void __const_udelay(unsigned long xloops)
-{
- __delay(((xloops * HZ *
- cpu_data(raw_smp_processor_id()).loops_per_jiffy) >> 32) + 1);
-}
-EXPORT_SYMBOL(__const_udelay);
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
-}
-EXPORT_SYMBOL(__udelay);
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
-}
-EXPORT_SYMBOL(__ndelay);
diff --git a/arch/x86/lib/getuser_64.S b/arch/x86/lib/getuser.S
similarity index 53%
rename from arch/x86/lib/getuser_64.S
rename to arch/x86/lib/getuser.S
index 5448876..ad37400 100644
--- a/arch/x86/lib/getuser_64.S
+++ b/arch/x86/lib/getuser.S
@@ -3,6 +3,7 @@
*
* (C) Copyright 1998 Linus Torvalds
* (C) Copyright 2005 Andi Kleen
+ * (C) Copyright 2008 Glauber Costa
*
* These functions have a non-standard call interface
* to make them more efficient, especially as they
@@ -13,14 +14,13 @@
/*
* __get_user_X
*
- * Inputs: %rcx contains the address.
+ * Inputs: %[r|e]ax contains the address.
* The register is modified, but all changes are undone
* before returning because the C code doesn't know about it.
*
- * Outputs: %rax is error code (0 or -EFAULT)
- * %rdx contains zero-extended value
- *
- * %r8 is destroyed.
+ * Outputs: %[r|e]ax is error code (0 or -EFAULT)
+ * %[r|e]dx contains zero-extended value
+ *
*
* These functions should not modify any other registers,
* as they get called from within inline assembly.
@@ -32,78 +32,73 @@
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
+#include <asm/asm.h>

.text
ENTRY(__get_user_1)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- cmpq threadinfo_addr_limit(%r8),%rcx
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
jae bad_get_user
-1: movzb (%rcx),%edx
- xorl %eax,%eax
+1: movzb (%_ASM_AX),%edx
+ xor %eax,%eax
ret
CFI_ENDPROC
ENDPROC(__get_user_1)

ENTRY(__get_user_2)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $1,%rcx
- jc 20f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 20f
- decq %rcx
-2: movzwl (%rcx),%edx
- xorl %eax,%eax
+ add $1,%_ASM_AX
+ jc bad_get_user
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+ jae bad_get_user
+2: movzwl -1(%_ASM_AX),%edx
+ xor %eax,%eax
ret
-20: decq %rcx
- jmp bad_get_user
CFI_ENDPROC
ENDPROC(__get_user_2)

ENTRY(__get_user_4)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $3,%rcx
- jc 30f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 30f
- subq $3,%rcx
-3: movl (%rcx),%edx
- xorl %eax,%eax
+ add $3,%_ASM_AX
+ jc bad_get_user
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+ jae bad_get_user
+3: mov -3(%_ASM_AX),%edx
+ xor %eax,%eax
ret
-30: subq $3,%rcx
- jmp bad_get_user
CFI_ENDPROC
ENDPROC(__get_user_4)

+#ifdef CONFIG_X86_64
ENTRY(__get_user_8)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $7,%rcx
- jc 40f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 40f
- subq $7,%rcx
-4: movq (%rcx),%rdx
- xorl %eax,%eax
+ add $7,%_ASM_AX
+ jc bad_get_user
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+ jae bad_get_user
+4: movq -7(%_ASM_AX),%_ASM_DX
+ xor %eax,%eax
ret
-40: subq $7,%rcx
- jmp bad_get_user
CFI_ENDPROC
ENDPROC(__get_user_8)
+#endif

bad_get_user:
CFI_STARTPROC
- xorl %edx,%edx
- movq $(-EFAULT),%rax
+ xor %edx,%edx
+ mov $(-EFAULT),%_ASM_AX
ret
CFI_ENDPROC
END(bad_get_user)

.section __ex_table,"a"
- .quad 1b,bad_get_user
- .quad 2b,bad_get_user
- .quad 3b,bad_get_user
- .quad 4b,bad_get_user
-.previous
+ _ASM_PTR 1b,bad_get_user
+ _ASM_PTR 2b,bad_get_user
+ _ASM_PTR 3b,bad_get_user
+#ifdef CONFIG_X86_64
+ _ASM_PTR 4b,bad_get_user
+#endif
diff --git a/arch/x86/lib/getuser_32.S b/arch/x86/lib/getuser_32.S
deleted file mode 100644
index 6d84b53..0000000
--- a/arch/x86/lib/getuser_32.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * __get_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/thread_info.h>
-
-
-/*
- * __get_user_X
- *
- * Inputs: %eax contains the address
- *
- * Outputs: %eax is error code (0 or -EFAULT)
- * %edx contains zero-extended value
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-.text
-ENTRY(__get_user_1)
- CFI_STARTPROC
- GET_THREAD_INFO(%edx)
- cmpl TI_addr_limit(%edx),%eax
- jae bad_get_user
-1: movzbl (%eax),%edx
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__get_user_1)
-
-ENTRY(__get_user_2)
- CFI_STARTPROC
- addl $1,%eax
- jc bad_get_user
- GET_THREAD_INFO(%edx)
- cmpl TI_addr_limit(%edx),%eax
- jae bad_get_user
-2: movzwl -1(%eax),%edx
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__get_user_2)
-
-ENTRY(__get_user_4)
- CFI_STARTPROC
- addl $3,%eax
- jc bad_get_user
- GET_THREAD_INFO(%edx)
- cmpl TI_addr_limit(%edx),%eax
- jae bad_get_user
-3: movl -3(%eax),%edx
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__get_user_4)
-
-bad_get_user:
- CFI_STARTPROC
- xorl %edx,%edx
- movl $-14,%eax
- ret
- CFI_ENDPROC
-END(bad_get_user)
-
-.section __ex_table,"a"
- .long 1b,bad_get_user
- .long 2b,bad_get_user
- .long 3b,bad_get_user
-.previous
diff --git a/arch/x86/lib/putuser_32.S b/arch/x86/lib/putuser.S
similarity index 54%
rename from arch/x86/lib/putuser_32.S
rename to arch/x86/lib/putuser.S
index f58fba1..36b0d15 100644
--- a/arch/x86/lib/putuser_32.S
+++ b/arch/x86/lib/putuser.S
@@ -2,6 +2,8 @@
* __put_user functions.
*
* (C) Copyright 2005 Linus Torvalds
+ * (C) Copyright 2005 Andi Kleen
+ * (C) Copyright 2008 Glauber Costa
*
* These functions have a non-standard call interface
* to make them more efficient, especially as they
@@ -11,6 +13,8 @@
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/asm.h>


/*
@@ -26,73 +30,68 @@
*/

#define ENTER CFI_STARTPROC ; \
- pushl %ebx ; \
- CFI_ADJUST_CFA_OFFSET 4 ; \
- CFI_REL_OFFSET ebx, 0 ; \
- GET_THREAD_INFO(%ebx)
-#define EXIT popl %ebx ; \
- CFI_ADJUST_CFA_OFFSET -4 ; \
- CFI_RESTORE ebx ; \
- ret ; \
+ GET_THREAD_INFO(%_ASM_BX)
+#define EXIT ret ; \
CFI_ENDPROC

.text
ENTRY(__put_user_1)
ENTER
- cmpl TI_addr_limit(%ebx),%ecx
+ cmp TI_addr_limit(%_ASM_BX),%_ASM_CX
jae bad_put_user
-1: movb %al,(%ecx)
- xorl %eax,%eax
+1: movb %al,(%_ASM_CX)
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_1)

ENTRY(__put_user_2)
ENTER
- movl TI_addr_limit(%ebx),%ebx
- subl $1,%ebx
- cmpl %ebx,%ecx
+ mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+ sub $1,%_ASM_BX
+ cmp %_ASM_BX,%_ASM_CX
jae bad_put_user
-2: movw %ax,(%ecx)
- xorl %eax,%eax
+2: movw %ax,(%_ASM_CX)
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_2)

ENTRY(__put_user_4)
ENTER
- movl TI_addr_limit(%ebx),%ebx
- subl $3,%ebx
- cmpl %ebx,%ecx
+ mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+ sub $3,%_ASM_BX
+ cmp %_ASM_BX,%_ASM_CX
jae bad_put_user
-3: movl %eax,(%ecx)
- xorl %eax,%eax
+3: movl %eax,(%_ASM_CX)
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_4)

ENTRY(__put_user_8)
ENTER
- movl TI_addr_limit(%ebx),%ebx
- subl $7,%ebx
- cmpl %ebx,%ecx
+ mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+ sub $7,%_ASM_BX
+ cmp %_ASM_BX,%_ASM_CX
jae bad_put_user
-4: movl %eax,(%ecx)
-5: movl %edx,4(%ecx)
- xorl %eax,%eax
+4: mov %_ASM_AX,(%_ASM_CX)
+#ifdef CONFIG_X86_32
+5: movl %edx,4(%_ASM_CX)
+#endif
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_8)

bad_put_user:
- CFI_STARTPROC simple
- CFI_DEF_CFA esp, 2*4
- CFI_OFFSET eip, -1*4
- CFI_OFFSET ebx, -2*4
- movl $-14,%eax
+ CFI_STARTPROC
+ movl $-EFAULT,%eax
EXIT
END(bad_put_user)

.section __ex_table,"a"
- .long 1b,bad_put_user
- .long 2b,bad_put_user
- .long 3b,bad_put_user
- .long 4b,bad_put_user
- .long 5b,bad_put_user
+ _ASM_PTR 1b,bad_put_user
+ _ASM_PTR 2b,bad_put_user
+ _ASM_PTR 3b,bad_put_user
+ _ASM_PTR 4b,bad_put_user
+#ifdef CONFIG_X86_32
+ _ASM_PTR 5b,bad_put_user
+#endif
.previous
diff --git a/arch/x86/lib/putuser_64.S b/arch/x86/lib/putuser_64.S
deleted file mode 100644
index 4989f5a..0000000
--- a/arch/x86/lib/putuser_64.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * __put_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- * (C) Copyright 2005 Andi Kleen
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-
-/*
- * __put_user_X
- *
- * Inputs: %rcx contains the address
- * %rdx contains new value
- *
- * Outputs: %rax is error code (0 or -EFAULT)
- *
- * %r8 is destroyed.
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/page.h>
-#include <asm/errno.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
- .text
-ENTRY(__put_user_1)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae bad_put_user
-1: movb %dl,(%rcx)
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__put_user_1)
-
-ENTRY(__put_user_2)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $1,%rcx
- jc 20f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 20f
- decq %rcx
-2: movw %dx,(%rcx)
- xorl %eax,%eax
- ret
-20: decq %rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_2)
-
-ENTRY(__put_user_4)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $3,%rcx
- jc 30f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 30f
- subq $3,%rcx
-3: movl %edx,(%rcx)
- xorl %eax,%eax
- ret
-30: subq $3,%rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_4)
-
-ENTRY(__put_user_8)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $7,%rcx
- jc 40f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 40f
- subq $7,%rcx
-4: movq %rdx,(%rcx)
- xorl %eax,%eax
- ret
-40: subq $7,%rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_8)
-
-bad_put_user:
- CFI_STARTPROC
- movq $(-EFAULT),%rax
- ret
- CFI_ENDPROC
-END(bad_put_user)
-
-.section __ex_table,"a"
- .quad 1b,bad_put_user
- .quad 2b,bad_put_user
- .quad 3b,bad_put_user
- .quad 4b,bad_put_user
-.previous
diff --git a/include/asm-x86/asm.h b/include/asm-x86/asm.h
index 7093982..9722032 100644
--- a/include/asm-x86/asm.h
+++ b/include/asm-x86/asm.h
@@ -3,8 +3,10 @@

#ifdef __ASSEMBLY__
# define __ASM_FORM(x) x
+# define __ASM_EX_SEC .section __ex_table
#else
# define __ASM_FORM(x) " " #x " "
+# define __ASM_EX_SEC " .section __ex_table,\"a\"\n"
#endif

#ifdef CONFIG_X86_32
@@ -14,6 +16,7 @@
#endif

#define __ASM_SIZE(inst) __ASM_SEL(inst##l, inst##q)
+#define __ASM_REG(reg) __ASM_SEL(e##reg, r##reg)

#define _ASM_PTR __ASM_SEL(.long, .quad)
#define _ASM_ALIGN __ASM_SEL(.balign 4, .balign 8)
@@ -24,10 +27,14 @@
#define _ASM_ADD __ASM_SIZE(add)
#define _ASM_SUB __ASM_SIZE(sub)
#define _ASM_XADD __ASM_SIZE(xadd)
+#define _ASM_AX __ASM_REG(ax)
+#define _ASM_BX __ASM_REG(bx)
+#define _ASM_CX __ASM_REG(cx)
+#define _ASM_DX __ASM_REG(dx)

/* Exception table entry */
# define _ASM_EXTABLE(from,to) \
- " .section __ex_table,\"a\"\n" \
+ __ASM_EX_SEC \
_ASM_ALIGN "\n" \
_ASM_PTR #from "," #to "\n" \
" .previous\n"
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
index 9fefd29..a1e8157 100644
--- a/include/asm-x86/uaccess.h
+++ b/include/asm-x86/uaccess.h
@@ -1,5 +1,454 @@
+#ifndef _ASM_UACCES_H_
+#define _ASM_UACCES_H_
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_DS MAKE_MM_SEG(-1UL)
+#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+ ((unsigned long __force)(addr) < \
+ (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
+ *
+ * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
+ */
+
+#define __range_not_ok(addr, size) \
+({ \
+ unsigned long flag, roksum; \
+ __chk_user_ptr(addr); \
+ asm("# range_ok\n\r" \
+ "add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0" \
+ : "=&r" (flag), "=r" (roksum) \
+ : "1" (addr), "g" ((long)(size)), \
+ "g" (current_thread_info()->addr_limit.seg)); \
+ flag; \
+})
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
+ * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ * to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern int __get_user_1(void);
+extern int __get_user_2(void);
+extern int __get_user_4(void);
+extern int __get_user_8(void);
+extern int __get_user_bad(void);
+
+#define __get_user_x(size, ret, x, ptr) \
+ asm volatile("call __get_user_" #size \
+ : "=a" (ret),"=d" (x) \
+ : "0" (ptr)) \
+
+/* Careful: we have to cast the result to the type of the pointer
+ * for sign reasons */
+
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#ifdef CONFIG_X86_32
+#define __get_user_8(__ret_gu, __val_gu, ptr) \
+ __get_user_x(X, __ret_gu, __val_gu, ptr)
+#else
+#define __get_user_8(__ret_gu, __val_gu, ptr) \
+ __get_user_x(8, __ret_gu, __val_gu, ptr)
+#endif
+
+#define get_user(x, ptr) \
+({ \
+ int __ret_gu; \
+ unsigned long __val_gu; \
+ __chk_user_ptr(ptr); \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_x(1, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 2: \
+ __get_user_x(2, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 4: \
+ __get_user_x(4, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 8: \
+ __get_user_8(__ret_gu, __val_gu, ptr); \
+ break; \
+ default: \
+ __get_user_x(X, __ret_gu, __val_gu, ptr); \
+ break; \
+ } \
+ (x) = (__typeof__(*(ptr)))__val_gu; \
+ __ret_gu; \
+})
+
+#define __put_user_x(size, x, ptr, __ret_pu) \
+ asm volatile("call __put_user_" #size : "=a" (__ret_pu) \
+ :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+
+
+
+#ifdef CONFIG_X86_32
+#define __put_user_u64(x, addr, err) \
+ asm volatile("1: movl %%eax,0(%2)\n" \
+ "2: movl %%edx,4(%2)\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: movl %3,%0\n" \
+ " jmp 3b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 4b) \
+ _ASM_EXTABLE(2b, 4b) \
+ : "=r" (err) \
+ : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __put_user_x8(x, ptr, __ret_pu) \
+ asm volatile("call __put_user_8" : "=a" (__ret_pu) \
+ : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+#else
+#define __put_user_u64(x, ptr, retval) \
+ __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
+#endif
+
+extern void __put_user_bad(void);
+
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax. clobbers %rbx
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr) \
+({ \
+ int __ret_pu; \
+ __typeof__(*(ptr)) __pu_val; \
+ __chk_user_ptr(ptr); \
+ __pu_val = x; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __put_user_x(1, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 2: \
+ __put_user_x(2, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 4: \
+ __put_user_x(4, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 8: \
+ __put_user_x8(__pu_val, ptr, __ret_pu); \
+ break; \
+ default: \
+ __put_user_x(X, __pu_val, ptr, __ret_pu); \
+ break; \
+ } \
+ __ret_pu; \
+})
+
+#define __put_user_size(x, ptr, size, retval, errret) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
+ break; \
+ case 2: \
+ __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
+ break; \
+ case 4: \
+ __put_user_asm(x, ptr, retval, "l", "k", "ir", errret);\
+ break; \
+ case 8: \
+ __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
+ break; \
+ default: \
+ __put_user_bad(); \
+ } \
+} while (0)
+
+#else
+
+#define __put_user_size(x, ptr, size, retval, errret) \
+do { \
+ __typeof__(*(ptr))__pus_tmp = x; \
+ retval = 0; \
+ \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
+ retval = errret; \
+} while (0)
+
+#define put_user(x, ptr) \
+({ \
+ int __ret_pu; \
+ __typeof__(*(ptr))__pus_tmp = x; \
+ __ret_pu = 0; \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
+ sizeof(*(ptr))) != 0)) \
+ __ret_pu = -EFAULT; \
+ __ret_pu; \
+})
+#endif
+
+#ifdef CONFIG_X86_32
+#define __get_user_asm_u64(x, ptr, retval, errret) (x) = __get_user_bad()
+#else
+#define __get_user_asm_u64(x, ptr, retval, errret) \
+ __get_user_asm(x, ptr, retval, "q", "", "=r", errret)
+#endif
+
+#define __get_user_size(x, ptr, size, retval, errret) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "l", "k", "=r", errret); \
+ break; \
+ case 8: \
+ __get_user_asm_u64(x, ptr, retval, errret); \
+ break; \
+ default: \
+ (x) = __get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
+ asm volatile("1: mov"itype" %2,%"rtype"1\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " xor"itype" %"rtype"1,%"rtype"1\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r" (err), ltype(x) \
+ : "m" (__m(addr)), "i" (errret), "0" (err))
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ long __pu_err; \
+ __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
+ __pu_err; \
+})
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ long __gu_err; \
+ unsigned long __gu_val; \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
+ (x) = (__force __typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+/* FIXME: this hack is definitely wrong -AK */
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
+ asm volatile("1: mov"itype" %"rtype"1,%2\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r"(err) \
+ : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err))
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
+#define __get_user(x, ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
+#define __put_user(x, ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+/*
+ * movsl can be slow when source and dest are not both 8-byte aligned
+ */
+#ifdef CONFIG_X86_INTEL_USERCOPY
+extern struct movsl_mask {
+ int mask;
+} ____cacheline_aligned_in_smp movsl_mask;
+#endif
+
+#define ARCH_HAS_NOCACHE_UACCESS 1
+
#ifdef CONFIG_X86_32
# include "uaccess_32.h"
#else
+# define ARCH_HAS_SEARCH_EXTABLE
# include "uaccess_64.h"
#endif
+
+#endif
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h
index 8e7595c..6fdef39 100644
--- a/include/asm-x86/uaccess_32.h
+++ b/include/asm-x86/uaccess_32.h
@@ -11,426 +11,6 @@
#include <asm/asm.h>
#include <asm/page.h>

-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-/*
- * movsl can be slow when source and dest are not both 8-byte aligned
- */
-#ifdef CONFIG_X86_INTEL_USERCOPY
-extern struct movsl_mask {
- int mask;
-} ____cacheline_aligned_in_smp movsl_mask;
-#endif
-
-#define __addr_ok(addr) \
- ((unsigned long __force)(addr) < \
- (current_thread_info()->addr_limit.seg))
-
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- *
- * This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
- *
- * This needs 33-bit arithmetic. We have a carry...
- */
-#define __range_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
- :"=&r" (flag), "=r" (roksum) \
- :"1" (addr), "g" ((int)(size)), \
- "rm" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-/**
- * access_ok: - Checks if a user space pointer is valid
- * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
- * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
- * to write to a block, it is always safe to read from it.
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-extern void __get_user_1(void);
-extern void __get_user_2(void);
-extern void __get_user_4(void);
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- :"=a" (ret),"=d" (x) \
- :"0" (ptr))
-
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-/**
- * get_user: - Get a simple variable from user space.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define get_user(x, ptr) \
-({ \
- int __ret_gu; \
- unsigned long __val_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_x(X, __ret_gu, __val_gu, ptr); \
- break; \
- } \
- (x) = (__typeof__(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_bad(void);
-
-/*
- * Strange magic calling convention: pointer in %ecx,
- * value in %eax(:%edx), return value in %eax, no clobbers.
- */
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-
-#define __put_user_1(x, ptr) \
- asm volatile("call __put_user_1" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_2(x, ptr) \
- asm volatile("call __put_user_2" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_4(x, ptr) \
- asm volatile("call __put_user_4" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_8(x, ptr) \
- asm volatile("call __put_user_8" : "=a" (__ret_pu) \
- : "A" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_X(x, ptr) \
- asm volatile("call __put_user_X" : "=a" (__ret_pu) \
- : "c" (ptr))
-
-/**
- * put_user: - Write a simple value into user space.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr)) __pu_val; \
- __chk_user_ptr(ptr); \
- __pu_val = x; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __put_user_1(__pu_val, ptr); \
- break; \
- case 2: \
- __put_user_2(__pu_val, ptr); \
- break; \
- case 4: \
- __put_user_4(__pu_val, ptr); \
- break; \
- case 8: \
- __put_user_8(__pu_val, ptr); \
- break; \
- default: \
- __put_user_X(__pu_val, ptr); \
- break; \
- } \
- __ret_pu; \
-})
-
-#else
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr))__pus_tmp = x; \
- __ret_pu = 0; \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
- sizeof(*(ptr))) != 0)) \
- __ret_pu = -EFAULT; \
- __ret_pu; \
-})
-
-
-#endif
-
-/**
- * __get_user: - Get a simple variable from user space, with less checking.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-
-/**
- * __put_user: - Write a simple value into user space, with less checking.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- long __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
- __pu_err; \
-})
-
-
-#define __put_user_u64(x, addr, err) \
- asm volatile("1: movl %%eax,0(%2)\n" \
- "2: movl %%edx,4(%2)\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: movl %3,%0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 4b) \
- _ASM_EXTABLE(2b, 4b) \
- : "=r" (err) \
- : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
-
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "", "ir", errret); \
- break; \
- case 8: \
- __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-#else
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- __typeof__(*(ptr))__pus_tmp = x; \
- retval = 0; \
- \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
- retval = errret; \
-} while (0)
-
-#endif
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errret), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "", "=r", errret); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i" (errret), "0" (err))
-
-
unsigned long __must_check __copy_to_user_ll
(void __user *to, const void *from, unsigned long n);
unsigned long __must_check __copy_from_user_ll
@@ -576,8 +156,6 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
return __copy_from_user_ll(to, from, n);
}

-#define ARCH_HAS_NOCACHE_UACCESS
-
static __always_inline unsigned long __copy_from_user_nocache(void *to,
const void __user *from, unsigned long n)
{
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
index b8a2f43..4e3ec00 100644
--- a/include/asm-x86/uaccess_64.h
+++ b/include/asm-x86/uaccess_64.h
@@ -9,265 +9,6 @@
#include <linux/prefetch.h>
#include <asm/page.h>

-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) (!((unsigned long)(addr) & \
- (current_thread_info()->addr_limit.seg)))
-
-/*
- * Uhhuh, this needs 65-bit arithmetic. We have a carry..
- */
-#define __range_not_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("# range_ok\n\r" \
- "addq %3,%1 ; sbbq %0,%0 ; cmpq %1,%4 ; sbbq $0,%0" \
- : "=&r" (flag), "=r" (roksum) \
- : "1" (addr), "g" ((long)(size)), \
- "g" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-#define access_ok(type, addr, size) (__range_not_ok(addr, size) == 0)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#define ARCH_HAS_SEARCH_EXTABLE
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- : "=a" (ret),"=d" (x) \
- : "c" (ptr) \
- : "r8")
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-#define get_user(x, ptr) \
-({ \
- unsigned long __val_gu; \
- int __ret_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- case 8: \
- __get_user_x(8, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_bad(); \
- break; \
- } \
- (x) = (__force typeof(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-extern void __put_user_bad(void);
-
-#define __put_user_x(size, ret, x, ptr) \
- asm volatile("call __put_user_" #size \
- :"=a" (ret) \
- :"c" (ptr),"d" (x) \
- :"r8")
-
-#define put_user(x, ptr) \
- __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- int __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err); \
- __pu_err; \
-})
-
-
-#define __put_user_check(x, ptr, size) \
-({ \
- int __pu_err; \
- typeof(*(ptr)) __user *__pu_addr = (ptr); \
- switch (size) { \
- case 1: \
- __put_user_x(1, __pu_err, x, __pu_addr); \
- break; \
- case 2: \
- __put_user_x(2, __pu_err, x, __pu_addr); \
- break; \
- case 4: \
- __put_user_x(4, __pu_err, x, __pu_addr); \
- break; \
- case 8: \
- __put_user_x(8, __pu_err, x, __pu_addr); \
- break; \
- default: \
- __put_user_bad(); \
- } \
- __pu_err; \
-})
-
-#define __put_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", -EFAULT);\
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", -EFAULT);\
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "k", "ir", -EFAULT);\
- break; \
- case 8: \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-/* FIXME: this hack is definitely wrong -AK */
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errno), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- int __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err); \
- (x) = (__force typeof(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern int __get_user_1(void);
-extern int __get_user_2(void);
-extern int __get_user_4(void);
-extern int __get_user_8(void);
-extern int __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", -EFAULT);\
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", -EFAULT);\
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "k", "=r", -EFAULT);\
- break; \
- case 8: \
- __get_user_asm(x, ptr, retval, "q", "", "=r", -EFAULT); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i"(errno), "0"(err))
-
/*
* Copy To/From Userspace
*/
@@ -437,7 +178,6 @@ __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
return copy_user_generic((__force void *)dst, src, size);
}

-#define ARCH_HAS_NOCACHE_UACCESS 1
extern long __copy_user_nocache(void *dst, const void __user *src,
unsigned size, int zerorest);



\
 
 \ /
  Last update: 2008-06-27 23:43    [W:0.405 / U:0.128 seconds]
©2003-2011 Jasper Spaans. Advertise on this site