lkml.org 
[lkml]   [2008]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: weird bug on r8169 with usb
    Date
    Le Wednesday 25 June 2008 20:52:34 Francois Romieu, vous avez écrit :
    > Yes, please send the unabbreviated output of 'lspci -vx' and 'dmesg'.

    Hi Francois,

    thanks for your time,
    Both are below.
    (After a boot without usb devices plugger, devices was plugger after the end
    of boot)

    # lspci -vx
    00:00.0 Host bridge: Intel Corporation DRAM Controller (rev 02)
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] Vendor Specific Information <?>
    00: 86 80 c0 29 06 00 90 20 02 00 00 06 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

    00:01.0 PCI bridge: Intel Corporation PCI Express Root Port (rev 02) (prog-if
    00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fa000000-feafffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000
    Capabilities: [80] Power Management version 3
    Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
    Queue=0/0 Enable-
    Capabilities: [a0] Express Root Port (Slot+), MSI 00
    Kernel driver in use: pcieport-driver
    00: 86 80 c1 29 07 01 10 00 02 00 04 06 08 00 01 00
    10: 00 00 00 00 00 00 00 00 00 04 04 00 d0 d0 00 00
    20: 00 fa a0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00
    30: 00 00 00 00 88 00 00 00 00 00 00 00 05 01 1a 00

    00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
    (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at b400 [size=32]
    Capabilities: [50] PCIe advanced features <?>
    Kernel driver in use: uhci_hcd
    00: 86 80 37 29 05 00 90 02 02 00 03 0c 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 b4 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00

    00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
    (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 21
    I/O ports at b480 [size=32]
    Capabilities: [50] PCIe advanced features <?>
    Kernel driver in use: uhci_hcd
    00: 86 80 38 29 05 00 90 02 02 00 03 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 81 b4 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 07 02 00 00

    00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
    (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 18
    Memory at f9efec00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCIe advanced features <?>
    Kernel driver in use: ehci_hcd
    00: 86 80 3c 29 06 00 90 02 02 20 03 0c 00 00 00 00
    10: 00 ec ef f9 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 03 00 00

    00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, fast devsel, latency 0, IRQ 22
    Memory at f9ef4000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
    Queue=0/0 Enable-
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Kernel driver in use: HDA Intel
    00: 86 80 3e 29 06 00 10 00 02 00 03 04 08 00 00 00
    10: 04 40 ef f9 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00

    00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02) (prog-if 00
    [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
    Queue=0/0 Enable-
    Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device
    2a6f
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport-driver
    00: 86 80 40 29 04 01 10 00 02 00 04 06 08 00 81 00
    10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
    20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 02 00

    00:1c.2 PCI bridge: Intel Corporation PCI Express Port 3 (rev 02) (prog-if 00
    [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: feb00000-febfffff
    Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
    Queue=0/0 Enable-
    Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device
    2a6f
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport-driver
    00: 86 80 44 29 07 01 10 00 02 00 04 06 08 00 81 00
    10: 00 00 00 00 00 00 00 00 00 02 02 00 e0 e0 00 00
    20: b0 fe b0 fe f1 f8 f1 f8 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 02 00

    00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
    (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 23
    I/O ports at b800 [size=32]
    Capabilities: [50] PCIe advanced features <?>
    Kernel driver in use: uhci_hcd
    00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 b8 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0e 01 00 00

    00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
    (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at b880 [size=32]
    Capabilities: [50] PCIe advanced features <?>
    Kernel driver in use: uhci_hcd
    00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 81 b8 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 02 00 00

    00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
    (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at bc00 [size=32]
    Capabilities: [50] PCIe advanced features <?>
    Kernel driver in use: uhci_hcd
    00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 bc 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 03 00 00

    00:1d.3 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 02)
    (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at c000 [size=32]
    Capabilities: [50] PCIe advanced features <?>
    Kernel driver in use: uhci_hcd
    00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 c0 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 00 00

    00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
    (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at f9eff800 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCIe advanced features <?>
    Kernel driver in use: ehci_hcd
    00: 86 80 3a 29 06 00 90 02 02 20 03 0c 00 00 00 00
    10: 00 f8 ef f9 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0e 01 00 00

    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01
    [Subtractive decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    Memory behind bridge: f9f00000-f9ffffff
    Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device
    2a6f
    00: 86 80 4e 24 06 01 10 00 92 01 04 06 00 00 01 00
    10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 22
    20: f0 f9 f0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 02 00

    00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] Vendor Specific Information <?>
    00: 86 80 16 29 07 00 10 02 02 00 01 06 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

    00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev
    02)
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
    I/O ports at c880 [size=8]
    I/O ports at c800 [size=4]
    I/O ports at c480 [size=8]
    I/O ports at c400 [size=4]
    I/O ports at c080 [size=32]
    Memory at f9eff000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
    Queue=0/4 Enable-
    Capabilities: [70] Power Management version 3
    Capabilities: [a8] SATA HBA <?>
    Capabilities: [b0] PCIe advanced features <?>
    Kernel driver in use: ahci
    00: 86 80 22 28 07 00 b0 02 02 00 04 01 00 00 00 00
    10: 81 c8 00 00 01 c8 00 00 81 c4 00 00 01 c4 00 00
    20: 81 c0 00 00 00 f0 ef f9 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00

    00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: medium devsel, IRQ 10
    Memory at f9effc00 (64-bit, non-prefetchable) [size=256]
    I/O ports at 0400 [size=32]
    00: 86 80 30 29 03 00 80 02 02 00 05 0c 00 00 00 00
    10: 04 fc ef f9 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 04 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00

    01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) (prog-if 10 [OHCI])
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, medium devsel, latency 64, IRQ 20
    Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: ohci1394
    00: c1 11 11 58 16 00 90 02 70 10 00 0c 08 40 00 00
    10: 00 f0 ff f9 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 00 00 44 00 00 00 00 00 00 00 04 01 0c 18

    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
    Express Gigabit Ethernet controller (rev 02)
    Subsystem: Hewlett-Packard Company Unknown device 2a6f
    Flags: bus master, fast devsel, latency 0, IRQ 18
    I/O ports at e800 [size=256]
    Memory at febff000 (64-bit, non-prefetchable) [size=4K]
    Memory at f8ff0000 (64-bit, prefetchable) [size=64K]
    Expansion ROM at febc0000 [disabled] [size=128K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
    Queue=0/0 Enable-
    Capabilities: [70] Express Endpoint, MSI 01
    Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
    Capabilities: [d0] Vital Product Data <?>
    Kernel driver in use: r8169
    00: ec 10 68 81 07 00 10 00 02 00 00 02 08 00 00 00
    10: 01 e8 00 00 00 00 00 00 04 f0 bf fe 00 00 00 00
    20: 0c 00 ff f8 00 00 00 00 00 00 00 00 3c 10 6f 2a
    30: 00 00 bc fe 40 00 00 00 00 00 00 00 0a 01 00 00

    04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev
    a1) (prog-if 00 [VGA controller])
    Subsystem: ASUSTeK Computer Inc. Unknown device 034e
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
    I/O ports at dc00 [size=128]
    Expansion ROM at feae0000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 2
    Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
    Queue=0/0 Enable-
    Capabilities: [78] Express Endpoint, MSI 00
    Kernel driver in use: nvidia
    Kernel modules: nvidia
    00: de 10 02 04 07 00 10 00 a1 00 00 03 00 00 00 00
    10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa
    20: 00 00 00 00 01 dc 00 00 00 00 00 00 43 10 4e 03
    30: 00 00 ae fe 60 00 00 00 00 00 00 00 05 01 00 00

    # dmesg
    PI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Processor #2 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Processor #3 6:15 APIC version 20
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227584
    Kernel command line: root=/dev/sda3
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2400.082 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 903184k/917504k available (3795k kernel code, 13828k reserved, 1361k
    data, 284k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
    vmalloc : 0xf8800000 - 0xfffb3000 ( 119 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0611000 - 0xc0658000 ( 284 kB)
    .data : 0xc04b4eaa - 0xc060937c (1361 kB)
    .text : 0xc0100000 - 0xc04b4eaa (3795 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    Calibrating delay using timer specific routine.. 4804.11 BogoMIPS
    (lpj=9608236)
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20070126
    CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
    Booting processor 1/1 ip 4000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4800.21 BogoMIPS
    (lpj=9600435)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
    Booting processor 2/2 ip 4000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 4800.16 BogoMIPS
    (lpj=9600335)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 2
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#2.
    CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
    Booting processor 3/3 ip 4000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 4800.40 BogoMIPS
    (lpj=9600808)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 3
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#3.
    CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
    Total of 4 processors activated (19204.90 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    Brought up 4 CPUs
    net_namespace: 544 bytes
    NET: Registered protocol family 16
    No dock devices found.
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: Error attaching device data
    ACPI: Error attaching device data
    ACPI: Error attaching device data
    ACPI: Error attaching device data
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
    system 00:06: ioport range 0x4d0-0x4d1 has been reserved
    system 00:06: ioport range 0x800-0x87f has been reserved
    system 00:06: ioport range 0x480-0x4bf has been reserved
    system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
    system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
    system 00:09: ioport range 0xa00-0xadf has been reserved
    system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
    system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0d: iomem range 0x0-0x9ffff could not be reserved
    system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
    system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
    system 00:0d: iomem range 0x0-0x0 could not be reserved
    PCI: Bridge: 0000:00:01.0
    IO window: d000-dfff
    MEM window: 0xfa000000-0xfeafffff
    PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: e000-efff
    MEM window: 0xfeb00000-0xfebfffff
    PREFETCH window: 0x00000000f8f00000-0x00000000f8ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: 0xf9f00000-0xf9ffffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Machine check exception polling timer started.
    audit: initializing netlink socket (disabled)
    type=2000 audit(1214343094.560:1): initialized
    NTFS driver 2.1.29 [Flags: R/W].
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    pci 0000:04:00.0: Boot video device
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    lp: driver loaded but no devices found
    Linux agpgart interface v0.103
    input: Power Button (FF) as /class/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input1
    ACPI: Power Button (CM) [PWRB]
    ACPI: SSDT CFFC0270, 0277 (r1 HPQOEM SLIC-CPC 11 INTL 20051117)
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: SSDT CFFC0700, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117)
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: SSDT CFFC0B90, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117)
    ACPI: ACPI0007:02 is registered as cooling_device2
    ACPI: SSDT CFFC1020, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117)
    ACPI: ACPI0007:03 is registered as cooling_device3
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    brd: module loaded
    loop: module loaded
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    r8169 Gigabit Ethernet driver 2.2LK loaded
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    r8169 0000:02:00.0: no MSI. Back to INTx.
    eth0: RTL8168c/8111c at 0xf8828000, 00:1e:8c:c4:66:7d, XID 3c2000c0 IRQ 18
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    ahci 0000:00:1f.2: version 3.0
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 19
    ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 19
    ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 19
    ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 19
    ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 19
    ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 19
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133
    ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATAPI: HL-DT-ST DVD-RW GSA-H60L, DC08, max UDMA/100
    ata2.00: configured for UDMA/100
    ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3.00: ATA-7: Hitachi HDS721075KLA330, GK8OA87A, max UDMA/133
    ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    ata3.00: configured for UDMA/133
    ata4: SATA link down (SStatus 0 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
    DPO or FUA
    sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
    DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GSA-H60L DC08 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72107 GK8O PQ: 0 ANSI: 5
    sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
    DPO or FUA
    sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
    DPO or FUA
    sdb: sdb1 sdb2
    sd 2:0:0:0: [sdb] Attached SCSI disk
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 20
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f9fff000-f9fff7ff]
    Max Packet=[1024] IR/IT contexts=[8/8]
    ieee1394: raw1394: /dev/raw1394 device initialized
    usbmon: debugfs is not available
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9efec00
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9eff800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 8 ports detected
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    usb 1-1: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    usb 2-5: new high speed USB device using ehci_hcd and address 2
    usb 2-5: configuration #1 chosen from 1 choice
    hub 2-5:1.0: USB hub found
    hub 2-5:1.0: 4 ports detected
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000106b1f9]
    hub 2-0:1.0: unable to enumerate USB device on port 8
    usb 8-2: new low speed USB device using uhci_hcd and address 2
    usb 8-2: configuration #1 chosen from 1 choice
    usb 2-5.1: new low speed USB device using ehci_hcd and address 4
    usb 2-5.1: configuration #1 chosen from 1 choice
    usb 2-5.2: new high speed USB device using ehci_hcd and address 5
    usb 2-5.2: configuration #1 chosen from 1 choice
    usb 2-5.4: new full speed USB device using ehci_hcd and address 6
    usb 2-5.4: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver usblp
    Initializing USB Mass Storage driver...
    scsi6 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 5
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input2
    input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver
    3.1] on usb-0000:00:1d.3-2
    input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /class/input/input3
    input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1]
    on usb-0000:00:1d.3-2
    HID device claimed by neither input, hiddev nor hidraw
    input: Logitech USB Receiver as /class/input/input4
    input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-5.4
    input: Logitech USB Receiver as /class/input/input5
    input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-5.4
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31
    16:40:16 2008 UTC).
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    ALSA device list:
    #0: HDA Intel at 0xf9ef4000 irq 22
    oprofile: using NMI interrupt.
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Starting balanced_irq
    Using IPI No-Shortcut mode
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 284k freed
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:04:00.0 to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17
    PDT 2008
    EXT3 FS on sda3, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 506036k swap on /dev/sda2. Priority:-1 extents:1 across:506036k
    scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0
    CCS
    sd 6:0:0:0: [sdc] Attached SCSI removable disk
    sd 6:0:0:0: Attached scsi generic sg3 type 0
    usb-storage: device scan complete
    r8169: eth0: link up
    r8169: eth0: link up
    eth0: no IPv6 routers present


    --
    David CHANIAL - Euro Web SARL
    http://www.euro-web.fr/
    Conseil & Infogérance
    Location de serveurs
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2008-06-26 09:21    [W:0.102 / U:30.304 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site