lkml.org 
[lkml]   [2008]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Performance of ext4
Hello Ted

On Thu, 12 Jun 2008, Theodore Tso wrote:

> On Thu, Jun 12, 2008 at 12:00:54PM +0000, Holger Kiehl wrote:
>> Yes, that is the one I took. Just to make sure, I downloaded it
>> again (and the linux-2.6.26-rc5 tree) and now it works. When I
>> compare the two patchsets the one I pulled this morning had patches
>> from 7 June and this one has more and they are from 11th June.
>
> Note that you don't have to download things from scratch, necessarily;
> the git command "git pull" will (if you havent made any changes in the
> git repository; if you have there are a few more steps you might have
> to take) pull down any newer changes and update your patch directory
> directly.
>
> Note that after you type "git pull", you may find that the
> ext4-patch-queue has been rebased to a newer version of the kernel.
> For example, the patch queue is currently against 2.6.26-rc5. The
> latest bleedig edge kernel as released by Linus in his git tree of the
> kernel already has these patches:
>
> ext4-fix-use-of-uninitalized-data.patch
> ext4-fix-uninit-block-group-initialization-with-FLEX_BG.patch
> ext4-fix-onine-resize-bug.patch
> fix-journal-checksum-mem-leak
> jbd2-if-a-journal-checksum-error-is-detected-propa.patch
> show-journal-async-commit-option
> jbd2-Fix-barrier-fallback-code-to-re-lock-the-buffe.patch
> ext4-enable-barriers-by-default.patch
>
> from the patch series. But, he hasn't released an official kernel
> release for 2.6.26-rc5 yet. So in the near future, the ext4 patch
>
I think this should be 2.6.26-rc6?

> queue will probably get rebased against one of the "daily snapshots",
> as found in /pub/linux/kernel/v2.6/snapshots on ftp.kernel.org. So
> for example, 2.6.26-rc5-git6 is the sixth snapshot since -rc5 was
> released. There is a patch against -rc5 named
> patch-2.6.26-rc5-git6.bz2 as located in the aforementioned directory
> on ftp.kernel.org, or if you are tracking Linus's kernel git tree, the
> file patch-2.6.26-rc5-git6.id proclaims that -rc5-git6 is git id
> 631025b. You will see that when you look at the first line of the
> series file in the ext4 patch queue, where it currently states:
>
> # BASE 2.6.26-rc5
>
> and where it will in the future say something like this:
>
> # BASE 2.6.26-rc5-git6
>
> That can be used by automated scripts to automatically determine which
> version of the Linux kernel should be grabbed before trying to apply
> the latest version of the ext4 patch queue. In general we try to use
> mainly official -rc1, -rc2, etc. release points, but after Linus
> pulled down some stable bug fixes, we will sometimes use a daily git
> snapshot release such as -rc5-git6 as described above.
>
> Hope this helps,
>
Yes, thanks a lot. I still have not yet managed to get this to work
with git. But downloading linux-2.6.26-rc5.tar.bz2 and then copying
the ext4-patch-queue into linux-2.6.26-rc5/patches and then using
quilt pull did get all the patches applied.

Here are the first test results:

Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
ext4(patchqueue)16G 59727 98 252733 52 110177 25 55821 98 296739 42 1553 5
16G 61047 99 239242 48 111664 25 55706 98 297151 42 1545 4
16G 60503 99 241532 47 109655 25 55671 98 297648 42 1552 3

That is with 2.6.26-rc5 + ext4-patch-queue and filesystem was created with
latest e2fsprogs snapshot as you suggested and formated with the following
command:

mke2fs -t ext4dev /dev/md7

Besides, I am doing those tests on a software raid 1+0. I think that is also
the reason why barriers are disabled by defaults:

Jun 12 12:17:48 helena kernel: kjournald2 starting. Commit interval 15 seconds
Jun 12 12:17:48 helena kernel: EXT4 FS on md7, internal journal
Jun 12 12:17:48 helena kernel: EXT4-fs: mounted filesystem with writeback data mode.
Jun 12 12:17:48 helena kernel: EXT4-fs: file extents enabled
Jun 12 12:17:48 helena kernel: EXT4-fs: mballoc enabled
Jun 12 12:18:26 helena kernel: JBD: barrier-based sync failed on md7 - disabling barriers

If one compares the results with those of 2.6.25.4 (without ext4-patch-queue):

Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
ext4 (2.6.25.4) 16G 52965 98 224199 89 108440 32 56389 99 303792 42 1526 4
16G 52792 98 223980 92 107685 32 56350 98 303066 42 1532 4
16G 52994 98 222354 92 107802 32 56386 99 303727 41 1455 4

This is quit an improvement but still does not match those numbers two years
ago.

However there must be still some bug, I am unable to run my own afdbench
benchmark on this (2.6.26-rc5 + ext4-patch-queue). It starts fine but then
about 3 minutes into the test (the test runs ~60 minutes) all process start
hanging in D-state (here a list):

afdbench 16381 0.0 0.0 4064 760 ? D 13:08 0:00 sf_ftp /home/afdbench/afd3 0 0 1 22765b95/0/48511fd7_2db_0
afdbench 16388 0.0 0.0 4064 760 ? D 13:08 0:00 sf_ftp /home/afdbench/afd3 3 0 1 22765b95/0/48511fd7_2dc_0
nobody 16391 0.0 0.0 44304 1444 ? Ss 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
afdbench 16395 0.0 0.0 4064 760 ? D 13:08 0:00 sf_ftp /home/afdbench/afd3 5 0 1 22765b95/0/48511fd7_2dd_0
nobody 16397 0.0 0.0 44304 1448 ? Ss 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
nobody 16400 0.0 0.0 44304 1448 ? Ss 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
afdbench 16404 0.0 0.0 44328 992 ? D 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
afdbench 16409 0.0 0.0 44328 996 ? D 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
afdbench 16411 0.0 0.0 44328 996 ? D 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
afdbench 16848 0.0 0.0 4064 716 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 2 0 0 820dc3d0/0/48511fdd_2f3_0
afdbench 16855 0.0 0.0 4064 712 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 1 0 7 cd52409d/0/48511fdd_2f3_0
afdbench 16857 0.0 0.0 4064 708 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 0 0 8 e1d94fe0/0/48511fdd_2f3_0
afdbench 16861 0.0 0.0 4064 708 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 2 0 9 26686393/0/48511fdd_2f3_0
afdbench 16865 0.0 0.0 4064 704 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 0 0 10 ae36cee/0/48511fdd_2f3_0
afdbench 16871 0.0 0.0 4064 716 ? D 13:08 0:00 sf_ftp /home/afdbench/afd2 1 0 0 bca9d45f/0/48511fdd_2d8_0
afdbench 16876 0.0 0.0 4064 716 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 1 0 0 820dc3d0/0/48511fdd_2f4_0
afdbench 16878 0.0 0.0 4064 772 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 0 0 6 b8cf511a/0/48511fdd_2f4_0
nobody 16879 0.0 0.0 44304 1448 ? Ss 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
afdbench 16881 0.0 0.0 4064 704 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 0 0 7 cd52409d/0/48511fdd_2f4_0
afdbench 16885 0.0 0.0 44404 1024 ? D 13:08 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf
afdbench 16886 0.0 0.0 4064 712 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 2 0 8 e1d94fe0/0/48511fdd_2f4_0
afdbench 16890 0.0 0.0 4064 716 ? D 13:08 0:00 sf_ftp /home/afdbench/afd2 2 0 0 bca9d45f/0/48511fdd_2d9_0
afdbench 16891 0.0 0.0 4064 712 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 0 0 9 26686393/0/48511fdd_2f4_0
afdbench 16892 0.0 0.0 4064 712 ? D 13:08 0:00 sf_ftp /home/afdbench/afd1 1 0 10 ae36cee/0/48511fdd_2f4_0

This time there is no OOPS and system is still up running without any
problem (except any process wanting to write something to this filesystem
gets stuck forever).

What can I do to help find the problem? The system is still up with all those
process hanging in D-state.

Thanks,
Holger



\
 
 \ /
  Last update: 2008-06-12 16:11    [W:0.238 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site