lkml.org 
[lkml]   [2008]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectWeird PCI problem after crash
    From
    Hi all,

    I'm sorry to bother you all with this question, but I don't know how to
    solve this by myself.

    Well,
    my laptop, HP dv5194ea, comes with an Intel ipw3945 wireless card, the
    card worked well with ipw3945 driver on Gentoo distribution,
    yesterday I was playing with a pcmcia wireless card (as usual) when my
    system crashed/freezed,
    after a forced shutdown I get this error when I load the driver for the
    ipw3945 card:

    PCI: Device 0000:06:00.0 not available because of resource 0 collisions


    this is what I've found out 'till now:

    lspci says:
    -----
    06:00.0 Non-VGA unclassified device: Intel Corporation PRO/Wireless
    3945ABG Network Connection (rev 02)
    Subsystem: Hewlett-Packard Company Device 135c
    Flags: bus master, fast devsel, latency 0, IRQ 3
    Memory at <ignored> (32-bit, non-prefetchable)
    Capabilities: [c8] Power Management version 2
    Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
    Queue=0/0 Enable-
    Capabilities: [e0] Express Legacy Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting <?>
    Capabilities: [140] Device Serial Number 22-e9-36-ff-ff-02-13-00
    Kernel modules: ipw3945
    -----
    Sounds a bit strange "Non-VGA ...", and so does "Memory at <ignored>"..

    Then:
    -----
    # cat /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/resource:

    0x0000000000000000 0x0000000000000fff 0x0000000000000200
    0x0000000000000000 0x0000000000000000 0x0000000000000000
    0x0000000000000000 0x0000000000000000 0x0000000000000000
    0x0000000000000000 0x0000000000000000 0x0000000000000000
    0x0000000000000000 0x0000000000000000 0x0000000000000000
    0x0000000000000000 0x0000000000000000 0x0000000000000000
    0x0000000000000000 0x0000000000000000 0x0000000000000000

    but:

    # cat: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/resource0:
    Input/output error
    -----

    Twist of fate: the card works well as usual under Windows XP, but gives
    the same error booting from a Linux LiveCD.

    You can find the dmesg output attacched to this mail if it can help.

    Thank you in advance, and please CC me in answer or comments, I'm not a
    list subscriber.

    Thank you

    Linux version 2.6.25-gentoo-r2 (root@maggot) (gcc version 4.1.2 (Gentoo 4.1.2)) #6 SMP Wed May 7 18:57:52 GMT 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
    BIOS-e820: 000000003fe80000 - 000000003ff00000 (ACPI NVS)
    BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    126MB HIGHMEM available.
    896MB LOWMEM available.
    Scan SMP from c0000000 for 1024 bytes.
    Scan SMP from c009fc00 for 1024 bytes.
    Scan SMP from c00f0000 for 65536 bytes.
    found SMP MP-table at [c00f65b0] 000f65b0
    Entering add_active_range(0, 0, 261760) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 261760
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 261760
    On node 0 totalpages: 261760
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 253 pages used for memmap
    HighMem zone: 32131 pages, LIFO batch:7
    Movable zone: 0 pages used for memmap
    DMI present.
    ACPI: RSDP 000F6580, 0014 (r0 PTLTD )
    ACPI: RSDT 3FE8B7DA, 0044 (r1 PTLTD Capell00 6040000 LTP 0)
    ACPI: FACP 3FE92DEE, 0074 (r1 HP NISSAN 6040000 LOHR 5A)
    ACPI: DSDT 3FE8C3BA, 6A34 (r1 HP NISSAN 6040000 INTL 20060608)
    ACPI: FACS 3FE93FC0, 0040
    ACPI: APIC 3FE92E62, 0068 (r1 HP NISSAN 6040000 LOHR 5A)
    ACPI: HPET 3FE92ECA, 0038 (r1 HP NISSAN 6040000 LOHR 5A)
    ACPI: MCFG 3FE92F02, 003C (r1 HP NISSAN 6040000 LOHR 5A)
    ACPI: BOOT 3FE92FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: APIC 3FE92F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
    ACPI: SSDT 3FE8C1AC, 020A (r1 SataRe SataAhci 1000 INTL 20060217)
    ACPI: SSDT 3FE8B81E, 04F6 (r1 PmRef CpuPm 3000 INTL 20060217)
    ACPI: BIOS bug: multiple APIC/MADT found, using 0
    ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
    ACPI: DMI detected: Hewlett-Packard
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:14 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 6:14 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259715
    Kernel command line: vga=773 irqpoll
    Misrouted IRQ fixup and polling support enabled
    This may significantly impact system performance
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1828.805 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1033804k/1047040k available (2308k kernel code, 12676k reserved, 774k data, 252k init, 129536k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0409000 - 0xc0448000 ( 252 kB)
    .data : 0xc0341150 - 0xc0402c60 ( 774 kB)
    .text : 0xc0100000 - 0xc0341150 (2308 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    Calibrating delay using timer specific routine.. 3669.47 BogoMIPS (lpj=1834735)
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20070126
    CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
    Booting processor 1/1 ip 4000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3657.12 BogoMIPS (lpj=1828560)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
    Total of 2 processors activated (7326.59 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    net_namespace: 544 bytes
    NET: Registered protocol family 16
    No dock devices found.
    ACPI: bus type pci registered
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
    PCI: Cannot allocate resource region 0 of device 0000:06:00.0
    system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
    system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
    system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
    system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
    system 00:06: ioport range 0x800-0x80f has been reserved
    system 00:06: ioport range 0x1000-0x107f has been reserved
    system 00:06: ioport range 0x1180-0x11bf has been reserved
    system 00:06: ioport range 0x1640-0x164f has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: disabled.
    MEM window: 0xd0000000-0xd1ffffff
    PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: disabled.
    MEM window: 0x54000000-0x540fffff
    PREFETCH window: disabled.
    PCI: Bus 9, cardbus bridge: 0000:08:06.0
    IO window: 0x00002400-0x000024ff
    IO window: 0x00002800-0x000028ff
    PREFETCH window: 0x50000000-0x53ffffff
    MEM window: 0x58000000-0x5bffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: 2000-2fff
    MEM window: 0xd2000000-0xd20fffff
    PREFETCH window: 0x0000000050000000-0x0000000053ffffff
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    PCI: Enabling device 0000:00:1c.2 (0100 -> 0102)
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    ACPI: PCI Interrupt 0000:08:06.0[A] -> GSI 18 (level, low) -> IRQ 18
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Simple Boot Flag at 0x36 set to 0x1
    highmem bounce pool size: 64 pages
    io scheduler noop registered
    io scheduler cfq registered (default)
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    pci 0000:01:00.0: Boot video device
    pci 0000:08:08.0: Firmware left e100 interrupts enabled; disabling
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    Allocate Port Service[0000:00:1c.1:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    Allocate Port Service[0000:00:1c.2:pcie03]
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1536k, total 131072k
    vesafb: mode is 1024x768x8, linelength=1024, pages=3
    vesafb: protected mode interface info at c000:d4c0
    vesafb: pmi: set display start = c00cd4f6, set palette = c00cd560
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    vga16fb: initializing
    vga16fb: mapped to 0xc00a0000
    fb1: VGA16 VGA frame buffer device
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    brd: module loaded
    loop: module loaded
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:08:08.0[A] -> GSI 20 (level, low) -> IRQ 20
    e100: eth0: e100_probe: addr 0xd2006000, irq 20, MAC addr 00:16:d4:07:7c:56
    Linux video capture interface: v2.00
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Probing IDE interface ide0...
    hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
    Probing IDE interface ide1...
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    ahci 0000:00:1f.2: version 3.0
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xd2404400 port 0xd2404500 irq 19
    ata2: DUMMY
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: ST9100824AS, 3.05, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA ST9100824AS 3.05 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    i2c /dev entries driver
    cpuidle: using governor ladder
    ip_tables: (C) 2000-2006 Netfilter Core Team
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Starting balanced_irq
    input: AT Translated Set 2 keyboard as /class/input/input0
    Using IPI No-Shortcut mode
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Freeing unused kernel memory: 252k freed
    Linux agpgart interface v0.103
    ACPI: SSDT 3FE8BF75, 01A3 (r1 PmRef Cpu0Ist 3000 INTL 20060217)
    ACPI: SSDT 3FE8BD14, 01DC (r1 PmRef Cpu0Cst 3001 INTL 20060217)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 3FE8C118, 0094 (r1 PmRef Cpu1Ist 3000 INTL 20060217)
    ACPI: SSDT 3FE8BEF0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060217)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    Marking TSC unstable due to: TSC halts in idle.
    input: Power Button (FF) as /class/input/input1
    ACPI: Power Button (FF) [PWRF]
    ACPI Error (evxfevnt-0186): Could not enable SleepButton event [20070126]
    ACPI Warning (evxface-0145): Could not enable fixed event 3 [20070126]
    input: Lid Switch as /class/input/input2
    ACPI: Lid Switch [LID]
    input: Power Button (CM) as /class/input/input3
    ACPI: Power Button (CM) [PWRB]
    ACPI: Battery Slot [BAT1] (battery present)
    ACPI: AC Adapter [ACAD] (on-line)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [TZ01] (50 C)
    ACPI: LNXTHERM:02 is registered as thermal_zone1
    ACPI: Thermal Zone [TZ02] (27 C)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
    ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
    ICH7: not 100% native mode: will probe irqs later
    ICH7: port 0x01f0 already claimed by ide0
    ICH7: IDE port disabled
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci: SDHCI controller found at 0000:08:06.3 [104c:803c] (rev 0)
    ACPI: PCI Interrupt 0000:08:06.3[D] -> GSI 20 (level, low) -> IRQ 20
    mmc0: SDHCI at 0xd2007800 irq 20 PIO
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: device:03 is registered as cooling_device2
    input: Video Bus as /class/input/input4
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    ACPI: device:07 is registered as cooling_device3
    input: Video Bus as /class/input/input5
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2404000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    nvidia: module license 'NVIDIA' taints kernel.
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 8 ports detected
    ACPI: PCI Interrupt 0000:08:06.2[C] -> GSI 22 (level, low) -> IRQ 22
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
    Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
    input: SynPS/2 Synaptics TouchPad as /class/input/input6
    Clocksource tsc unstable (delta = -62583175 ns)
    NET: Registered protocol family 10
    Adding 1048568k swap on /SWAP. Priority:-1 extents:5788 across:48579564k
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dmpr
    ipw3945: Copyright(c) 2003-2006 Intel Corporation
    PCI: Device 0000:06:00.0 not available because of resource 0 collisions
    \
     
     \ /
      Last update: 2008-05-09 14:15    [W:0.082 / U:0.256 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site