lkml.org 
[lkml]   [2008]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [git patches] libata updates - (improve post-reset device ready test) regression
> 
> Tejun Heo (12):
> libata: improve post-reset device ready test

This commit (78ab88f04f44bed566d51dce0c7cbfeff6449a06) causes a long
boot delay with my onboard Promise controller. It seems like libata
probes for a nonexisting PATA drive...

ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
scsi0 : sata_promise
scsi1 : sata_promise
scsi2 : sata_promise
ata1: SATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600200 irq 18
ata2: SATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600280 irq 18
ata3: PATA max UDMA/133 mmio m4096@0xfb600000 port 0xfb600300 irq 18
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7
ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata3: link is slow to respond, please be patient (ready=0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: link is slow to respond, please be patient (ready=0)
ata3: SRST failed (errno=-16)
ata3: link is slow to respond, please be patient (ready=0)
ata3: SRST failed (errno=-16)
ata3: link is slow to respond, please be patient (ready=0)
ata3: SRST failed (errno=-16)
- Last output repeated twice -
ata3: reset failed, giving up
--
Markus


\
 
 \ /
  Last update: 2008-05-07 16:59    [W:0.088 / U:0.240 seconds]
©2003-2014 Jasper Spaans. Advertise on this site