lkml.org 
[lkml]   [2008]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: [PATCH 3/4] [MMC] mmc_spi: add polling support for thecarddetectline
Date
From


> -----Original Message-----
> From: Anton Vorontsov [mailto:avorontsov@ru.mvista.com]
> Sent: 2008?5?26? 23:38
> To: Chen Gong
> Cc: Kumar Gala; David Brownell; Pierre Ossman;
> linuxppc-dev@ozlabs.org;
> spi-devel-general@lists.sourceforge.net;
> linux-kernel@vger.kernel.org; Tabi Timur
> Subject: Re: [PATCH 3/4] [MMC] mmc_spi: add polling support
> for thecarddetectline
>
> On Thu, May 22, 2008 at 09:44:57PM +0800, Chen Gong wrote:
> [...]
> > > > I want to know whether every card working well ? Because
> > > I'm working
> > > > For 83xx MMC-over-SPI support, the presented concrete
> > > methods I used
> > > > as you do, but only 256M card seems good, 512M or 1G/2G
> > > card all have
> > > > some problems
> > >
> > > So far I don't have cards larger than 256M. Will try to get one
> > > though.
> > >
> > Thanks, if you have any new test report pls contact me.
>
> Just tested with Apacer 1GB MicroSD (connected through dumb
> adapter), it works quite well here. I've successfully wrote
> 10 mb file onto ext2 formatted partition...

Oh, thanks for your info. The card I used is Kingston 1G SD card.

>
> > BTW, a fews days ago Joakim Tjernlund made a heavy fix for
> > spi_mpc83xx.c to resolve clock glitch. But it looks no any
> impact for
> > me, but maybe it has positive effect for you.
>
> Yup, I use it.
>
> Btw, which mmc driver are you using? The one from MPC8610HPCD
> BSP or mainline's mmc_spi?

:-( the mmc driver now in the MPC8610HPCD BSP is ported from uClinux
by me, it has many problems, because at that time MMC-over-SPI driver
doen't exist in the kernel.



\
 
 \ /
  Last update: 2008-05-27 04:15    [W:0.076 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site