lkml.org 
[lkml]   [2008]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: troubleshooting/debugging hard locks
On Tue, May 20, 2008 at 1:47 PM, Lee Howard <faxguy@howardsilvan.com> wrote:
> After further troubleshooting it turns out that the message above was a bit
> of a red herring. I moved the PCIe modem card from one PCIe slot to another
> so that it would be on a different IRQ (one that wasn't shared with the
> network, ATA, and USB). The message above does not occur now, however, the
> hard lock is back... and this time with no kernel messages at all.
>
> So, I'm back to square one again... I've got:
>
> nmi_watchdog=1 idle=poll nohz=off
>
> ... and still I get the hard lockup and no kernel messages. How do I
> troubleshoot/debug this? How do I know where to look?

The only thing I can think of is to recompile the latest mainline
kernel with all debugging options enabled in the .config. and then try
to reproduce with that.


\
 
 \ /
  Last update: 2008-05-20 23:21    [W:0.046 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site