lkml.org 
[lkml]   [2008]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 08/13] regulator: core kbuild files
From
Date
This patch adds kernel build support for the regulator core.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
---
arch/arm/Kconfig | 2 +
drivers/regulator/Kconfig | 49 ++++++++++++++++++++++++++++++++++++++++++++
drivers/regulator/Makefile | 10 +++++++++
3 files changed, 61 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/Kconfig
create mode 100644 drivers/regulator/Makefile

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b786e68..2e532fb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1179,6 +1179,8 @@ source "drivers/dma/Kconfig"

source "drivers/dca/Kconfig"

+source "drivers/regulator/Kconfig"
+
source "drivers/uio/Kconfig"

endmenu
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 0000000..84f89ec
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,49 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+ bool "Voltage and Current Regulator Support"
+ default n
+ help
+ Generic Voltage and Current Regulator support.
+
+ This framework is designed to provide a generic interface to voltage
+ and current regulators within the Linux kernel. It's intended to
+ provide voltage and current control to client or consumer drivers and
+ also provide status information to user space applications through a
+ sysfs interface.
+
+ The intention is to allow systems to dynamically control regulator
+ output in order to save power and prolong battery life. This applies
+ to both voltage regulators (where voltage output is controllable) and
+ current sinks (where current output is controllable).
+
+ This framework safely compiles out if not selected so that client
+ drivers can still be used in systems with no software controllable
+ regulators.
+
+ If unsure, say no.
+
+config REGULATOR_DEBUG
+ bool "Regulator debug support"
+ depends on REGULATOR
+ help
+ Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+ tristate
+ default n
+ select REGULATOR
+
+config REGULATOR_VIRTUAL_CONSUMER
+ tristate "Virtual regulator consumer support"
+ default n
+ select REGULATOR
+ help
+ This driver provides a virtual consumer for the voltage and
+ current regulator API which provides sysfs controls for
+ configuring the supplies requested. This is mainly useful
+ for test purposes.
+
+ If unsure, say no.
+
+endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
new file mode 100644
index 0000000..29528b7
--- /dev/null
+++ b/drivers/regulator/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for regulator drivers.
+#
+
+
+obj-$(CONFIG_REGULATOR) += core.o
+obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
+obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+
+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
--
1.5.4.3



\
 
 \ /
  Last update: 2008-05-02 17:55    [W:0.031 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site