lkml.org 
[lkml]   [2008]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 37/40] ide-scsi: use pc->callback
* Add ide_scsi_callback() pc->callback implementation, then update
idescsi_check_condition() and idescsi_queue() to setup ->callback.

* Convert idescsi_pc_intr() to use pc->callback.

This is a preparation for adding generic ide_pc_intr() helper.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/scsi/ide-scsi.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -183,6 +183,24 @@ static void ide_scsi_hex_dump(u8 *data,
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
}

+static int idescsi_end_request(ide_drive_t *, int, int);
+
+static void ide_scsi_callback(ide_drive_t *drive)
+{
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive);
+ struct ide_atapi_pc *pc = scsi->pc;
+
+ if (pc->flags & PC_FLAG_TIMEDOUT)
+ debug_log("%s: got timed out packet %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+ /* end this request now - scsi should retry it*/
+ else if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
+ printk(KERN_INFO "Packet command completed, %d bytes"
+ " transferred\n", pc->xferred);
+
+ idescsi_end_request(drive, 1, 0);
+}
+
static int idescsi_check_condition(ide_drive_t *drive,
struct request *failed_cmd)
{
@@ -210,6 +228,7 @@ static int idescsi_check_condition(ide_d
rq->cmd_type = REQ_TYPE_SENSE;
rq->cmd_flags |= REQ_PREEMPT;
pc->timeout = jiffies + WAIT_READY;
+ pc->callback = ide_scsi_callback;
/* NOTE! Save the failed packet command in "rq->buffer" */
rq->buffer = (void *) failed_cmd->special;
pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
@@ -222,8 +241,6 @@ static int idescsi_check_condition(ide_d
return 0;
}

-static int idescsi_end_request(ide_drive_t *, int, int);
-
static ide_startstop_t
idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
@@ -350,10 +367,7 @@ static ide_startstop_t idescsi_pc_intr (
debug_log("Reached %s interrupt handler\n", __func__);

if (pc->flags & PC_FLAG_TIMEDOUT) {
- debug_log("%s: got timed out packet %lu at %lu\n", __func__,
- pc->scsi_cmd->serial_number, jiffies);
- /* end this request now - scsi should retry it*/
- idescsi_end_request (drive, 1, 0);
+ pc->callback(drive);
return ide_stopped;
}
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
@@ -369,14 +383,11 @@ static ide_startstop_t idescsi_pc_intr (

if ((stat & DRQ_STAT) == 0) {
/* No more interrupts */
- if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
- printk(KERN_INFO "Packet command completed, %d bytes"
- " transferred\n", pc->xferred);
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
local_irq_enable_in_hardirq();
if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR))
rq->errors++;
- idescsi_end_request (drive, 1, 0);
+ pc->callback(drive);
return ide_stopped;
}
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
@@ -718,6 +729,7 @@ static int idescsi_queue (struct scsi_cm
pc->scsi_cmd = cmd;
pc->done = done;
pc->timeout = jiffies + cmd->timeout_per_command;
+ pc->callback = ide_scsi_callback;

if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);

\
 
 \ /
  Last update: 2008-05-18 20:55    [W:0.240 / U:0.128 seconds]
©2003-2014 Jasper Spaans. Advertise on this site