lkml.org 
[lkml]   [2008]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH -mm] kexec jump -v9
Date
On Thursday, 15 of May 2008, Eric W. Biederman wrote:
> "Huang, Ying" <ying.huang@intel.com> writes:
>
> > This is a minimal patch with only the essential features. All
> > additional features are split out and can be discussed later. I think
> > it may be easier to get consensus on this minimal patch.
>
> A minimal patch route sounds good.
>
>
> > * Do not allocate memory (or fail in any way) in machine_kexec().
> > * We are past the point of no return, committed to rebooting now.
> > */
> > -NORET_TYPE void machine_kexec(struct kimage *image)
> > +void machine_kexec(struct kimage *image)
> > {
> > unsigned long page_list[PAGES_NR];
> > void *control_page;
> > + asmlinkage NORET_TYPE void
> > + (*relocate_kernel_ptr)(unsigned long indirection_page,
> > + unsigned long control_page,
> > + unsigned long start_address,
> > + unsigned int has_pae) ATTRIB_NORET;
> >
> > /* Interrupts aren't acceptable while we reboot */
> > local_irq_disable();
> >
> > control_page = page_address(image->control_code_page);
> > - memcpy(control_page, relocate_kernel, PAGE_SIZE);
> > + memcpy(control_page, kexec_relocate_page, PAGE_SIZE/2);
> > + KJUMP_MAGIC(control_page) = 0;
> >
> > + if (image->preserve_context) {
> > + KJUMP_MAGIC(control_page) = KJUMP_MAGIC_NUMBER;
> > + if (kexec_jump_save_cpu(control_page)) {
> > + image->start = KJUMP_ENTRY(control_page);
> > + return;
>
> Tricky, and I expect unnecessary.
> We should be able to just have relocate_new_kernel return?
>
> > + }
> > + }
> > +
> > + relocate_kernel_ptr = control_page +
> > + ((void *)relocate_kernel - (void *)kexec_relocate_page);
> > page_list[PA_CONTROL_PAGE] = __pa(control_page);
> > - page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
> > + page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
> > page_list[PA_PGD] = __pa(kexec_pgd);
> > page_list[VA_PGD] = (unsigned long)kexec_pgd;
> > #ifdef CONFIG_X86_PAE
> > @@ -127,6 +148,7 @@ NORET_TYPE void machine_kexec(struct kim
> > page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
> > page_list[PA_PTE_1] = __pa(kexec_pte1);
> > page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
> > + page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
> >
> > /* The segment registers are funny things, they have both a
> > * visible and an invisible part. Whenever the visible part is
> > @@ -145,8 +167,9 @@ NORET_TYPE void machine_kexec(struct kim
> > set_idt(phys_to_virt(0),0);
> >
> > /* now call it */
> > - relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
> > - image->start, cpu_has_pae);
> > + relocate_kernel_ptr((unsigned long)image->head,
> > + (unsigned long)page_list,
> > + image->start, cpu_has_pae);
> > }
>
>
> > --- a/kernel/sys.c
> > +++ b/kernel/sys.c
> > @@ -301,18 +301,26 @@ EXPORT_SYMBOL_GPL(kernel_restart);
> > * Move into place and start executing a preloaded standalone
> > * executable. If nothing was preloaded return an error.
> > */
> > -static void kernel_kexec(void)
> > +static int kernel_kexec(void)
> > {
> > + int ret = -ENOSYS;
> > #ifdef CONFIG_KEXEC
> > - struct kimage *image;
> > - image = xchg(&kexec_image, NULL);
> > - if (!image)
> > - return;
> > - kernel_restart_prepare(NULL);
> > - printk(KERN_EMERG "Starting new kernel\n");
> > - machine_shutdown();
> > - machine_kexec(image);
> > + if (xchg(&kexec_lock, 1))
> > + return -EBUSY;
> > + if (!kexec_image) {
> > + ret = -EINVAL;
> > + goto unlock;
> > + }
> > + if (!kexec_image->preserve_context) {
> > + kernel_restart_prepare(NULL);
> > + printk(KERN_EMERG "Starting new kernel\n");
> > + machine_shutdown();
> > + }
> > + ret = kexec_jump(kexec_image);
> > +unlock:
> > + xchg(&kexec_lock, 0);
> > #endif
>
> Ugh. No. Not sharing the shutdown methods with reboot and
> the normal kexec path looks like a recipe for failure to me.
>
> This looks like where we really need to have the conversation.
> What methods do we use to shutdown the system.
>
> My take on the situation is this. For proper handling we
> need driver device_detach and device_reattach methods.
>
> With the following semantics. The device_detach methods
> will disable DMA and place the hardware in a sane state
> from which the device driver can reclaim and reinitialize it,
> but the hardware will not be touched.
>
> device_reattach reattaches the driver to the hardware.
>
> So looking at this patch I see two very productive directions
> we can go.
> 1) A patch that just fixes up the kexec infrastructure code
> so it implements the swap page and provides the kernel
> reentry point. And doesn't handle the upper layer
> user interface portion.
>
> 2) A patch that renames device_shutdown to device_detach.
> And starts implementing the driver hooks needed from
> a resumable kexec.
>
> Then we have the question what do we do with devices in the
> kernel that don't have a device_reattach method, when we
> expect to come back from a kexec. The two choices are:
> (a) fail the operations before we commit to anything.
> (b) hotunplug/hotreplug the device.
>
> With respect to device methods. I don't think any of
> the current power saving methods make sense. Certainly
> nothing that prepares the way for using weird ACPI states.
>
> I don't think there is not enough difference between
> device_detach and device_shutdown for us to maintain two
> separate methods, and that seems to place an unreasonable
> maintenance burden on device driver developers.

Well, it looks like we do similar things concurrently. Please have a look
here: http://kerneltrap.org/Linux/Separating_Suspend_and_Hibernation

Similar patches are in the Greg's tree already.

Thanks,
Rafael


\
 
 \ /
  Last update: 2008-05-15 01:57    [W:0.374 / U:1.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site