lkml.org 
[lkml]   [2008]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectOops on -rc2-git1, possibly md_raid1 or xfs related. (Was: Re: Linux 2.6.26-rc2)
    From
    Date
    Just booted -rc2-git1, and got an oops(entier dmesg):
    Linux version 2.6.26-rc2-git1 (root@quadstation) (gcc version 4.3.0
    (Gentoo 4.3.0 p1.1) ) #1 SMP PREEMPT Tue May 13 03:32:40 CEST 2008
    Command line: root=/dev/md1
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
    BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
    BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
    BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    Entering add_active_range(0, 0, 158) 0 entries of 256 used
    Entering add_active_range(0, 256, 851680) 1 entries of 256 used
    Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
    max_pfn_mapped = 1245184
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    init_memory_mapping
    DMI 2.4 present.
    ACPI: RSDP 000F6EB0, 0014 (r0 GBT )
    ACPI: RSDT CFEE3040, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    ACPI: FACP CFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    ACPI: DSDT CFEE3180, 4C2E (r1 GBT GBTUACPI 1000 MSFT 100000C)
    ACPI: FACS CFEE0000, 0040
    ACPI: HPET CFEE7F00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
    ACPI: MCFG CFEE7F80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    ACPI: APIC CFEE7E00, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    Entering add_active_range(0, 0, 158) 0 entries of 256 used
    Entering add_active_range(0, 256, 851680) 1 entries of 256 used
    Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
    early res: 0 [0-fff] BIOS data page
    early res: 1 [6000-7fff] TRAMPOLINE
    early res: 2 [200000-64dfb3] TEXT DATA BSS
    early res: 3 [9e800-fffff] BIOS reserved
    early res: 4 [8000-dfff] PGTABLE
    [ffffe20000000000-ffffe200043fffff] PMD ->
    [ffff81000c200000-ffff8100105fffff] on node 0
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1245184
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0 -> 158
    0: 256 -> 851680
    0: 1048576 -> 1245184
    On node 0 totalpages: 1048190
    DMA zone: 56 pages used for memmap
    DMA zone: 1209 pages reserved
    DMA zone: 2733 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 833304 pages, LIFO batch:31
    Normal zone: 2688 pages used for memmap
    Normal zone: 193920 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
    PERCPU: Allocating 33988 bytes of per cpu data
    NR_CPUS: 4, nr_cpu_ids: 4
    Built 1 zonelists in Zone order, mobility grouping on. Total pages:
    1029957
    Kernel command line: root=/dev/md1
    Initializing CPU#0
    Preemptible RCU implementation.
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    TSC calibrated against PM_TIMER
    time.c: Detected 3200.110 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Checking aperture...
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing software IO TLB between 0x163f000 - 0x563f000
    Memory: 4045556k/4980736k available (2759k kernel code, 146580k
    reserved, 976k data, 252k init)
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    hpet clockevent registered
    Calibrating delay using timer specific routine.. 6403.45 BogoMIPS
    (lpj=3201728)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 6144K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Freeing SMP alternatives: 19k freed
    ACPI: Core revision 20080321
    CPU0: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07
    Using local APIC timer interrupts.
    APIC timer calibration result 25000857
    Detected 25.000 MHz APIC timer.
    Booting processor 1/3 ip 6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 6400.07 BogoMIPS
    (lpj=3200038)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 6144K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 3
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Booting processor 2/1 ip 6000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 6400.04 BogoMIPS
    (lpj=3200022)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 6144K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU2: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
    CPU2: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07
    checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    Booting processor 3/2 ip 6000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 6400.04 BogoMIPS
    (lpj=3200024)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 6144K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 2
    CPU3: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
    CPU3: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07
    checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    Brought up 4 CPUs
    Total of 4 processors activated (25603.62 BogoMIPS).
    net_namespace: 360 bytes
    NET: Registered protocol family 16
    No dock devices found.
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e3ffffff
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI-GART: No AMD northbridge found.
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    hpet0: 4 64-bit timers, 14318180 Hz
    system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    system 00:01: ioport range 0x290-0x29f has been reserved
    system 00:01: ioport range 0x800-0x87f has been reserved
    system 00:01: ioport range 0x290-0x294 has been reserved
    system 00:01: ioport range 0x880-0x88f has been reserved
    system 00:09: ioport range 0x400-0x4bf could not be reserved
    system 00:0a: iomem range 0xe0000000-0xe3ffffff could not be reserved
    system 00:0b: iomem range 0xd1e00-0xd3fff has been reserved
    system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
    system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
    system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
    system 00:0b: iomem range 0xcfee0000-0xcfefffff could not be reserved
    system 00:0b: iomem range 0x0-0x9ffff could not be reserved
    system 00:0b: iomem range 0x100000-0xcfedffff could not be reserved
    system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:0b: iomem range 0xfed10000-0xfed1dfff could not be reserved
    system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved
    system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
    system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved
    system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
    system 00:0b: iomem range 0xe0000-0xeffff has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: disabled.
    MEM window: 0xe4000000-0xe6ffffff
    PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
    PCI: Bridge: 0000:00:06.0
    IO window: a000-afff
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.0
    IO window: b000-bfff
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.4
    IO window: c000-cfff
    MEM window: 0xe7000000-0xe7ffffff
    PREFETCH window: 0x00000000e9000000-0x00000000e90fffff
    PCI: Bridge: 0000:00:1c.5
    IO window: d000-dfff
    MEM window: 0xe8000000-0xe8ffffff
    PREFETCH window: 0x00000000e9100000-0x00000000e91fffff
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: 0xe9200000-0xe92fffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    SGI XFS with ACLs, security attributes, large block/inode numbers, no
    debug enabled
    msgmni has been set to 7902 for ipc namespace ffffffff8058c100
    io scheduler noop registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:06.0:pcie00]
    Allocate Port Service[0000:00:06.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    Allocate Port Service[0000:00:1c.4:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.5:pcie00]
    Allocate Port Service[0000:00:1c.5:pcie02]
    Allocate Port Service[0000:00:1c.5:pcie03]
    hpet_resources: 0xfed00000 is busy
    Linux agpgart interface v0.103
    Driver 'sd' needs updating - please use bus_type methods
    ahci 0000:00:1f.2: version 3.0
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
    Switched to high resolution mode on CPU 3
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 2
    Switched to high resolution mode on CPU 0
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA
    mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum
    part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306100 irq 378
    ata2: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306180 irq 378
    ata3: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306200 irq 378
    ata4: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306280 irq 378
    ata5: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306300 irq 378
    ata6: SATA max UDMA/133 abar m2048@0xe9306000 port 0xe9306380 irq 378
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-6: ST3500320NS, SN04, max UDMA/133
    ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata2.00: ATA-6: ST3500320NS, SN04, max UDMA/133
    ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    ata2.00: configured for UDMA/133
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0
    ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN04 PQ: 0
    ANSI: 5
    sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sdb: sdb1 sdb2 sdb3
    sd 1:0:0:0: [sdb] Attached SCSI disk
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.2 to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    md: raid1 personality registered for level 1
    cpuidle: using governor ladder
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    TCP cubic registered
    NET: Registered protocol family 17
    input: AT Translated Set 2 keyboard as /class/input/input0
    md: Autodetecting RAID arrays.
    md: Scanned 6 and added 6 devices.
    md: autorun ...
    md: considering sdb3 ...
    md: adding sdb3 ...
    md: sdb2 has different UUID to sdb3
    md: sdb1 has different UUID to sdb3
    md: adding sda3 ...
    md: sda2 has different UUID to sdb3
    md: sda1 has different UUID to sdb3
    md: created md2
    md: bind<sda3>
    md: bind<sdb3>
    md: running: <sdb3><sda3>
    raid1: raid set md2 active with 2 out of 2 mirrors
    md: considering sdb2 ...
    md: adding sdb2 ...
    md: sdb1 has different UUID to sdb2
    md: adding sda2 ...
    md: sda1 has different UUID to sdb2
    md: created md1
    md: bind<sda2>
    md: bind<sdb2>
    md: running: <sdb2><sda2>
    raid1: raid set md1 active with 2 out of 2 mirrors
    md: considering sdb1 ...
    md: adding sdb1 ...
    md: adding sda1 ...
    md: created md0
    md: bind<sda1>
    md: bind<sdb1>
    md: running: <sdb1><sda1>
    raid1: raid set md0 active with 2 out of 2 mirrors
    md: ... autorun DONE.
    Filesystem "md1": Disabling barriers, not supported by the underlying
    device
    XFS mounting filesystem md1
    ------------[ cut here ]------------
    WARNING: at include/linux/blkdev.h:443 blk_remove_plug+0x71/0xa0()
    Modules linked in:
    Pid: 460, comm: md1_raid1 Not tainted 2.6.26-rc2-git1 #1

    Call Trace:
    [<ffffffff80232b04>] warn_on_slowpath+0x64/0xc0
    [<ffffffff803609a9>] __next_cpu+0x19/0x30
    [<ffffffff8022ac8c>] find_busiest_group+0x22c/0x8d0
    [<ffffffff803551a1>] blk_remove_plug+0x71/0xa0
    [<ffffffff804219fb>] flush_pending_writes+0x3b/0x90
    [<ffffffff80421b4c>] raid1d+0x4c/0xf60
    [<ffffffff8022f2fb>] hrtick_set+0x7b/0x160
    [<ffffffff804acb50>] thread_return+0x5e/0x57e
    [<ffffffff804ad32d>] schedule_timeout+0xad/0xf0
    [<ffffffff804299e7>] md_thread+0x47/0x120
    [<ffffffff80248df0>] autoremove_wake_function+0x0/0x30
    [<ffffffff804299a0>] md_thread+0x0/0x120
    [<ffffffff80248a47>] kthread+0x47/0x90
    [<ffffffff8022fe87>] schedule_tail+0x27/0x60
    [<ffffffff8020c598>] child_rip+0xa/0x12
    [<ffffffff80248a00>] kthread+0x0/0x90
    [<ffffffff8020c58e>] child_rip+0x0/0x12

    ---[ end trace a97097b29774f236 ]---
    Ending clean XFS mount for filesystem: md1
    VFS: Mounted root (xfs filesystem) readonly.
    Freeing unused kernel memory: 252k freed
    Real Time Clock Driver v1.12ac
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9305000
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 6 ports detected
    input: Power Button (FF) as /class/input/input1
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input2
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI: ACPI0007:02 is registered as cooling_device2
    ACPI: Processor [CPU2] (supports 8 throttling states)
    ACPI: ACPI0007:03 is registered as cooling_device3
    ACPI: Processor [CPU3] (supports 8 throttling states)
    ACPI: Power Button (CM) [PWRB]
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9304000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 6 ports detected
    r8169 Gigabit Ethernet driver 2.2LK loaded
    ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:04:00.0 to 64
    eth0: RTL8168c/8111c at 0xffffc20000078000, 00:1d:7d:06:7b:39, XID
    3c2000c0 IRQ 377
    r8169 Gigabit Ethernet driver 2.2LK loaded
    ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:05:00.0 to 64
    eth1: RTL8168c/8111c at 0xffffc2000007a000, 00:1d:7d:06:75:d8, XID
    3c2000c0 IRQ 376
    ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 18 (level, low) -> IRQ 18
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]
    MMIO=[e9204000-e92047ff] Max Packet=[2048] IR/IT contexts=[4/8]
    Filesystem "md1": Disabling barriers, not supported by the underlying
    device
    fuse init (API version 7.9)
    input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ee74800001d7d]
    r8169: eth0: link up
    r8169: eth0: link up
    it87: Found IT8718F chip at 0x290, revision 5
    it87: in3 is VCC (+5V)
    coretemp coretemp.0: Using relative temperature scale!
    coretemp coretemp.1: Using relative temperature scale!
    coretemp coretemp.2: Using relative temperature scale!
    coretemp coretemp.3: Using relative temperature scale!

    The system appeared to work, for the few minutes i had it running,
    before i went back to .25.

    On Mon, 2008-05-12 at 07:55 -0700, Linus Torvalds wrote:
    <snip>



    \
     
     \ /
      Last update: 2008-05-13 03:55    [W:0.054 / U:59.476 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site