lkml.org 
[lkml]   [2008]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] I2C: SiByte: Correct a comment about frequency
On Sun, 11 May 2008 03:10:29 +0100 (BST), Maciej W. Rozycki wrote:
> The frequency may have been once hardcoded to 100kHz, but currently it is
> passed as an argument to i2c_sibyte_add_bus(), so update the comment to
> match code. While at it, reformat a nearby comment for consistency. No
> functional changes.
>
> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
> ---
> It should be obvious. Please apply.
>
> Maciej
>
> patch-2.6.26-rc1-20080505-sibyte-i2c-add-bus-16
> diff -up --recursive --new-file linux-2.6.26-rc1-20080505.macro/drivers/i2c/busses/i2c-sibyte.c linux-2.6.26-rc1-20080505/drivers/i2c/busses/i2c-sibyte.c
> --- linux-2.6.26-rc1-20080505.macro/drivers/i2c/busses/i2c-sibyte.c 2008-05-05 02:55:25.000000000 +0000
> +++ linux-2.6.26-rc1-20080505/drivers/i2c/busses/i2c-sibyte.c 2008-05-11 01:14:30.000000000 +0000
> @@ -136,10 +136,10 @@ int __init i2c_sibyte_add_bus(struct i2c
> {
> struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
>
> - /* register new adapter to i2c module... */
> + /* Register new adapter to i2c module... */
> i2c_adap->algo = &i2c_sibyte_algo;
>
> - /* Set the frequency to 100 kHz */
> + /* Set the requested frequency. */
> csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
> csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
>

Applied, thanks.

--
Jean Delvare


\
 
 \ /
  Last update: 2008-05-11 11:07    [W:0.225 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site