lkml.org 
[lkml]   [2008]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH 27/37] Input: aiptek - add support for Genius G-PEN 560 tablet
From
USBHID driver only supports relative mode with this tablet so let aiptek
module handle it.

Signed-off-by: Dmitry Guryanov <guryanov@dgap.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/hid/usbhid/hid-quirks.c | 4 ++++
drivers/input/tablet/Kconfig | 10 +++++-----
drivers/input/tablet/aiptek.c | 2 ++
3 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index e29a057..17b2f49 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -405,6 +405,9 @@
#define USB_VENDOR_ID_YEALINK 0x6993
#define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K 0xb001

+#define USB_VENDOR_ID_KYE 0x0458
+#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -703,6 +706,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_63, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_64, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR, USB_DEVICE_ID_N_S_HARMONY, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560, HID_QUIRK_IGNORE },

{ 0, 0 }
};
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index d371c0b..effb49e 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -25,14 +25,14 @@ config TABLET_USB_ACECAD
module will be called acecad.

config TABLET_USB_AIPTEK
- tristate "Aiptek 6000U/8000U tablet support (USB)"
+ tristate "Aiptek 6000U/8000U and Genius G_PEN tablet support (USB)"
depends on USB_ARCH_HAS_HCD
select USB
help
- Say Y here if you want to use the USB version of the Aiptek 6000U
- or Aiptek 8000U tablet. Make sure to say Y to "Mouse support"
- (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
- (CONFIG_INPUT_EVDEV) as well.
+ Say Y here if you want to use the USB version of the Aiptek 6000U,
+ Aiptek 8000U or Genius G-PEN 560 tablet. Make sure to say Y to
+ "Mouse support" (CONFIG_INPUT_MOUSEDEV) and/or "Event interface
+ support" (CONFIG_INPUT_EVDEV) as well.

To compile this driver as a module, choose M here: the
module will be called aiptek.
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 94683f5..1d759f6 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -184,6 +184,7 @@
*/

#define USB_VENDOR_ID_AIPTEK 0x08ca
+#define USB_VENDOR_ID_KYE 0x0458
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09

@@ -832,6 +833,7 @@ static const struct usb_device_id aiptek_ids[] = {
{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+ {USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
{}
};

--
1.5.5.rc2.6.gf58d



\
 
 \ /
  Last update: 2008-04-21 15:27    [W:0.237 / U:3.204 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site