lkml.org 
[lkml]   [2008]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ATA Bus Error with ICH7R and WDC WD7500AAKS-0
(cc linux-ide)

On Wed, 02 Apr 2008 18:51:05 +0530
Chaitanya Huilgol <chaitanya@tidaldata.com> wrote:

>
> Hi,
>
> I am getting frequent 'ATA bus error' with ICH7R & WD7500AAKS-0.
> I have tried the following combinations of NCQ and Write Cache disabled,
> Write I/O is done with dd:
> dd if=/dev/zero of=/dev/sdc bs=1048576
>
> (1) With Write Cache is Disabled and NCQ is enabled then the
> errors are seen immediately on starting I/O
> (2) With Write Cache enabled and NCQ enabled the errors are less frequent
> (3) With NCQ disabled using "echo 1 >/sys/block/sdc/device/queue_depth"
> the errors are rare but do occur.
>
> I have tried with different SATA Cables & Sata port combinations to
> rule out cable/bad port issues.
>
> I am wondering if the WDC WD7500AAKS-0 is another candidate for NCQ blacklist?
>
>
> Configuration Details:
> ------------------------
>
> MotherBoard: S975XBX2
> AHCI controller: ICH7R
>
> Kernel version: 2.6.21.1
> ahci.ko version: 2.1
> libata.ko version: 2.20
>
> Relevant dmesg output:
> -------------------------
> ata3: SATA max UDMA/133 cmd 0xf8822200 ctl 0x00000000 bmdma 0x00000000 irq 220
> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
> ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> ata3.00: configured for UDMA/133
> scsi3 : ahci
> scsi 2:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
> SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB)
> sdc: Write Protect is off
> sdc: Mode Sense: 00 3a 00 00
> SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB)
> sdc: Write Protect is off
> sdc: Mode Sense: 00 3a 00 00
> SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>
> ata3.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x810000 action 0x2 frozen
> ata3.00: (irq_stat 0x08400000, interface fatal error, PHY RDY changed)
> ata3.00: cmd 61/00:00:78:96:fd/04:00:00:00:00/40 tag 0 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:08:78:9a:fd/04:00:00:00:00/40 tag 1 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:10:78:aa:fd/04:00:00:00:00/40 tag 2 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:18:78:ae:fd/04:00:00:00:00/40 tag 3 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:20:78:b2:fd/04:00:00:00:00/40 tag 4 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:28:78:b6:fd/04:00:00:00:00/40 tag 5 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:30:78:ba:fd/04:00:00:00:00/40 tag 6 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:38:78:be:fd/04:00:00:00:00/40 tag 7 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:40:78:c2:fd/04:00:00:00:00/40 tag 8 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:48:78:c6:fd/04:00:00:00:00/40 tag 9 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:50:78:ca:fd/04:00:00:00:00/40 tag 10 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:58:78:ce:fd/04:00:00:00:00/40 tag 11 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:60:78:d2:fd/04:00:00:00:00/40 tag 12 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:68:78:d6:fd/04:00:00:00:00/40 tag 13 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:70:78:da:fd/04:00:00:00:00/40 tag 14 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:78:78:de:fd/04:00:00:00:00/40 tag 15 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:80:78:e2:fd/04:00:00:00:00/40 tag 16 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:88:78:e6:fd/04:00:00:00:00/40 tag 17 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:90:78:ea:fd/04:00:00:00:00/40 tag 18 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:98:78:ee:fd/04:00:00:00:00/40 tag 19 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:a0:78:f2:fd/04:00:00:00:00/40 tag 20 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:a8:78:f6:fd/04:00:00:00:00/40 tag 21 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:b0:78:fa:fd/04:00:00:00:00/40 tag 22 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:b8:78:fe:fd/04:00:00:00:00/40 tag 23 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:c0:78:02:fe/04:00:00:00:00/40 tag 24 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:c8:78:06:fe/04:00:00:00:00/40 tag 25 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:d0:78:0a:fe/04:00:00:00:00/40 tag 26 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:d8:78:92:fd/04:00:00:00:00/40 tag 27 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:e0:78:9e:fd/04:00:00:00:00/40 tag 28 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:e8:78:a2:fd/04:00:00:00:00/40 tag 29 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3.00: cmd 61/00:f0:78:a6:fd/04:00:00:00:00/40 tag 30 cdb 0x0 data 524288 out
> res 40/00:cc:78:06:fe/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
> ata3: waiting for device to spin up (7 secs)
> ata3: soft resetting port
> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3.00: configured for UDMA/133
> ata3: EH complete
> SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB)
> sdc: Write Protect is off
> sdc: Mode Sense: 00 3a 00 00
>
>
> lspci output:
> -----------------
>
> 00:00.0 Host bridge: Intel Corporation Memory Controller Hub
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
> 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
> 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
> 00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=AHCI (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
> 02:00.0 SATA controller: Marvell Technology Group Ltd. Unknown device 6145 (rev a1)
> 03:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03)
> 03:00.3 Serial controller: Intel Corporation Unknown device 108f (rev 03)
> 03:00.4 Class 0c07: Intel Corporation Unknown device 108e (rev 03)
> 04:00.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54)
> 04:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
>
>



\
 
 \ /
  Last update: 2008-04-03 00:03    [W:0.036 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site