lkml.org 
[lkml]   [2008]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [UPDATED v3][PATCH 4/7] regulator: framework core
From
Date
On Fri, 2008-03-07 at 00:39 -0800, Andrew Morton wrote:
> On Thu, 06 Mar 2008 18:11:54 +0000 Liam Girdwood <lg@opensource.wolfsonmicro.com> wrote:
>
> > This patch provides the regulator framework core. The core also provides a
> > sysfs interface for userspace information.
> >
> > +/* gets the regulator for a given consumer device */
> > +static struct regulator *get_device_regulator(struct device *dev)
> > +{
> > + struct regulator *regulator = NULL;
> > + struct regulator_cdev *rcdev;
> > +
> > + mutex_lock(&regulator_list_mutex);
> > + list_for_each_entry(rcdev, &regulator_list, list) {
> > + mutex_lock(&rcdev->mutex);
> > + list_for_each_entry(regulator, &rcdev->consumer_list, list) {
> > + if (regulator->dev == dev) {
> > + mutex_unlock(&rcdev->mutex);
> > + return regulator;
> > + }
> > + }
> > + mutex_unlock(&rcdev->mutex);
> > + }
> > + mutex_unlock(&regulator_list_mutex);
> > + return NULL;
> > +}
>
> Is this really supposed to return with the list lock held? If so, some
> comment describing the overall locking design here would be better than
> having to reverse-engineer it.
>
> > +static inline int get_lowest_stable_voltage(struct regulator_cdev *rcdev)
> > +{
> > + struct regulator *regulator;
> > + int highest_uV = 0;
> > +
> > + /* lock is held by caller */
> > + list_for_each_entry(regulator, &rcdev->consumer_list, list) {
> > + if (regulator->enabled && regulator->uV_required > highest_uV)
> > + highest_uV = regulator->uV_required;
> > + }
> > + return highest_uV;
> > +}
>
> Too large to inline - the compiler will do this for you if it is a benefit
> to do so.
>
> > +/* Calculate the new optimum regulator operating mode based on the new total
> > + * consumer load. All locks held by caller */
> > +static void drms_uA_update(struct regulator_cdev *rcdev)
> > +{
> > + struct regulator *sibling;
> > + int current_uA = 0, output_uV, input_uV, err;
> > + unsigned int mode;
> > +
> > + err = regulator_check_drms(rcdev);
> > + if (err < 0 || !rcdev->desc->ops->get_optimum_mode ||
> > + !rcdev->desc->ops->get_voltage || !rcdev->desc->ops->set_mode);
> > + return;
> > +
> > + /* get output voltage */
> > + output_uV = rcdev->desc->ops->get_voltage(rcdev);
> > +
> > + /* get input voltage */
> > + if (rcdev->parent && rcdev->parent->desc->ops->get_voltage)
> > + input_uV = rcdev->parent->desc->ops->get_voltage(rcdev->parent);
> > + else
> > + input_uV = rcdev->constraints->input_uV;
> > +
> > + /* calc total requested load */
> > + list_for_each_entry(sibling, &rcdev->consumer_list, list)
> > + current_uA += sibling->uA_load;
>
> Should be indented with a tab, not spacespacespacespace

This patch releases the lock in get_device_regulator(), makes
get_lowest_stable_voltage() non inline and fixes a minor indentation
issue.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
---
drivers/regulator/reg-core.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/reg-core.c b/drivers/regulator/reg-core.c
index 56367ab..e29584f 100644
--- a/drivers/regulator/reg-core.c
+++ b/drivers/regulator/reg-core.c
@@ -85,6 +85,7 @@ static struct regulator *get_device_regulator(struct device *dev)
list_for_each_entry(regulator, &rcdev->consumer_list, list) {
if (regulator->dev == dev) {
mutex_unlock(&rcdev->mutex);
+ mutex_unlock(&regulator_list_mutex);
return regulator;
}
}
@@ -336,7 +337,7 @@ struct class regulator_class = {
};

/* find the lowest stable voltage that all enabled clients can operate at */
-static inline int get_lowest_stable_voltage(struct regulator_cdev *rcdev)
+static int get_lowest_stable_voltage(struct regulator_cdev *rcdev)
{
struct regulator *regulator;
int highest_uV = 0;
@@ -387,7 +388,7 @@ static void drms_uA_update(struct regulator_cdev *rcdev)

/* calc total requested load */
list_for_each_entry(sibling, &rcdev->consumer_list, list)
- current_uA += sibling->uA_load;
+ current_uA += sibling->uA_load;

/* now get the optimum mode for our new total regulator load */
mode = rcdev->desc->ops->get_optimum_mode(rcdev, input_uV,
--
1.5.4.3




\
 
 \ /
  Last update: 2008-03-08 18:27    [W:0.104 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site