lkml.org 
[lkml]   [2008]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] x86_64: fix amd_detect_cmp
[PATCH] x86_64: fix amd_detect_cmp

for system with apicid lifting, boot cpu apicid will be 4
got
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0

so try to offset apicid back before get phys_proc_id with bits shift.
then we can get correct socket ID

also remove remove cpu_data(0) reference.
because cpu_data(0) only be ready after smp_prepare_cpus with the assignment
from boot_cpu_data to current_cpu_data aka cpu_data(0).
and check_bugs()==>identify_cpu(&boot_cpu_data) is quite before than
smp_prepare_cpus.
so just use boot_cpu_id instead.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
[PATCH] x86_64: fix amd_detect_cmp

for system with apicid lifting, boot cpu apicid will be 4
got
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0

so try to offset apicid back before get phys_proc_id with bits shift.
then we can get correct socket ID

also remove remove cpu_data(0) reference.
because cpu_data(0) only be ready after smp_prepare_cpus with the assignment
from boot_cpu_data to current_cpu_data aka cpu_data(0).
and check_bugs()==>identify_cpu(&boot_cpu_data) is quite before than smp_prepare_cpus.
so just use boot_cpu_id instead.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index b03adac..a3c4385 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -566,7 +566,7 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
/* Low order bits define the core id (index of core in socket) */
c->cpu_core_id = c->phys_proc_id & ((1 << bits)-1);
/* Convert the APIC ID into the socket ID */
- c->phys_proc_id = phys_pkg_id(bits);
+ c->phys_proc_id = (c->apicid - boot_cpu_id) >> bits;

#ifdef CONFIG_NUMA
node = c->phys_proc_id;
@@ -583,7 +583,7 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
If that doesn't result in a usable node fall back to the
path for the previous case. */

- int ht_nodeid = apicid - (cpu_data(0).phys_proc_id << bits);
+ int ht_nodeid = apicid - boot_cpu_id;

if (ht_nodeid >= 0 &&
apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
\
 
 \ /
  Last update: 2008-03-06 10:13    [W:0.037 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site