Messages in this thread | | | Date | Thu, 27 Mar 2008 19:08:46 -0400 | From | Dave Jones <> | Subject | Re: v4l oops in 2.6.25-rc7 |
| |
On Thu, Mar 27, 2008 at 07:04:30PM -0400, Dave Jones wrote: > Booted up with an ancient bt848 card present and got this..
actually that card was slightly newer than I thought, it's an 878. From earlier in the boot process..
bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23 bttv0: Bt878 (rev 17) at 0000:02:0b.0, irq: 23, latency: 32, mmio: 0xf47fe000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 0-0050: Hauppauge model 44354, rev B121, serial# 2106674 tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 0-0050: audio processor is MSP3415 (idx 6) tveeprom 0-0050: has radio bttv0: Hauppauge eeprom indicates model#44354 bttv0: tuner type=5 bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
Dave
-- http://www.codemonkey.org.uk
| |