lkml.org 
[lkml]   [2008]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] [TRIVIAL] spelling fix in various files: preferred -> preferred
Spelling fix: prefered -> preferred

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>

diff -r 2202c155b8c3 -r ef957e3033e5 Documentation/i2c/busses/i2c-parport-light
--- a/Documentation/i2c/busses/i2c-parport-light Tue Mar 18 21:34:48 2008 -0700
+++ b/Documentation/i2c/busses/i2c-parport-light Wed Mar 19 21:01:45 2008 +0100
@@ -4,7 +4,7 @@

This driver is a light version of i2c-parport. It doesn't depend
on the parport driver, and uses direct I/O access instead. This might be
-prefered on embedded systems where wasting memory for the clean but heavy
+preferred on embedded systems where wasting memory for the clean but heavy
parport handling is not an option. The drawback is a reduced portability
and the impossibility to daisy-chain other parallel port devices.

diff -r 2202c155b8c3 -r ef957e3033e5 arch/m68knommu/platform/coldfire/head.S
--- a/arch/m68knommu/platform/coldfire/head.S Tue Mar 18 21:34:48 2008 -0700
+++ b/arch/m68knommu/platform/coldfire/head.S Wed Mar 19 21:01:45 2008 +0100
@@ -19,7 +19,7 @@

/*
* If we don't have a fixed memory size, then lets build in code
- * to auto detect the DRAM size. Obviously this is the prefered
+ * to auto detect the DRAM size. Obviously this is the preferred
* method, and should work for most boards. It won't work for those
* that do not have their RAM starting at address 0, and it only
* works on SDRAM (not boards fitted with SRAM).
diff -r 2202c155b8c3 -r ef957e3033e5 arch/s390/kernel/time.c
--- a/arch/s390/kernel/time.c Tue Mar 18 21:34:48 2008 -0700
+++ b/arch/s390/kernel/time.c Wed Mar 19 21:01:45 2008 +0100
@@ -1038,7 +1038,7 @@
eacr = etr_handle_update(&aib, eacr);

/*
- * Select ports to enable. The prefered synchronization mode is PPS.
+ * Select ports to enable. The preferred synchronization mode is PPS.
* If a port can be enabled depends on a number of things:
* 1) The port needs to be online and uptodate. A port is not
* disabled just because it is not uptodate, but it is only
diff -r 2202c155b8c3 -r ef957e3033e5 drivers/media/video/cx25840/cx25840-core.c
--- a/drivers/media/video/cx25840/cx25840-core.c Tue Mar 18 21:34:48 2008 -0700
+++ b/drivers/media/video/cx25840/cx25840-core.c Wed Mar 19 21:01:45 2008 +0100
@@ -245,7 +245,7 @@
cx25840_write(client, 0x918, 0xa0);
cx25840_write(client, 0x919, 0x01);

- /* stereo prefered */
+ /* stereo preferred */
cx25840_write(client, 0x809, 0x04);
/* AC97 shift */
cx25840_write(client, 0x8cf, 0x0f);
diff -r 2202c155b8c3 -r ef957e3033e5 drivers/net/enc28j60_hw.h
--- a/drivers/net/enc28j60_hw.h Tue Mar 18 21:34:48 2008 -0700
+++ b/drivers/net/enc28j60_hw.h Wed Mar 19 21:01:45 2008 +0100
@@ -303,7 +303,7 @@
/* maximum ethernet frame length */
#define MAX_FRAMELEN 1518

-/* Prefered half duplex: LEDA: Link status LEDB: Rx/Tx activity */
+/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */
#define ENC28J60_LAMPS_MODE 0x3476

#endif
diff -r 2202c155b8c3 -r ef957e3033e5 drivers/net/sk98lin/skrlmt.c
--- a/drivers/net/sk98lin/skrlmt.c Tue Mar 18 21:34:48 2008 -0700
+++ b/drivers/net/sk98lin/skrlmt.c Wed Mar 19 21:01:45 2008 +0100
@@ -1627,7 +1627,7 @@
PortFound = SK_FALSE;
pAC->Rlmt.CheckSwitch = SK_FALSE;

-#if 0 /* RW 2001/10/18 - active port becomes always prefered one */
+#if 0 /* RW 2001/10/18 - active port becomes always preferred one */
if (pAC->Rlmt.Net[NetIdx].Preference == 0xFFFFFFFF) { /* Automatic */
/* disable auto-fail back */
PrefPort = Active;
diff -r 2202c155b8c3 -r ef957e3033e5 drivers/net/tokenring/madgemc.c
--- a/drivers/net/tokenring/madgemc.c Tue Mar 18 21:34:48 2008 -0700
+++ b/drivers/net/tokenring/madgemc.c Wed Mar 19 21:01:45 2008 +0100
@@ -459,7 +459,7 @@
}

/*
- * Set the card to the prefered ring speed.
+ * Set the card to the preferred ring speed.
*
* Unlike newer cards, the MC16/32 have their speed selection
* circuit connected to the Madge ASICs and not to the TMS380
diff -r 2202c155b8c3 -r ef957e3033e5 include/acpi/actbl.h
--- a/include/acpi/actbl.h Tue Mar 18 21:34:48 2008 -0700
+++ b/include/acpi/actbl.h Wed Mar 19 21:01:45 2008 +0100
@@ -260,9 +260,9 @@
#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) */

/*
- * FADT Prefered Power Management Profiles
+ * FADT Preferred Power Management Profiles
*/
-enum acpi_prefered_pm_profiles {
+enum acpi_preferred_pm_profiles {
PM_UNSPECIFIED = 0,
PM_DESKTOP = 1,
PM_MOBILE = 2,
diff -r 2202c155b8c3 -r ef957e3033e5 include/asm-blackfin/cplbinit.h
--- a/include/asm-blackfin/cplbinit.h Tue Mar 18 21:34:48 2008 -0700
+++ b/include/asm-blackfin/cplbinit.h Wed Mar 19 21:01:45 2008 +0100
@@ -52,7 +52,7 @@
struct cplb_desc {
u32 start; /* start address */
u32 end; /* end address */
- u32 psize; /* prefered size if any otherwise 1MB or 4MB*/
+ u32 psize; /* preferred size if any otherwise 1MB or 4MB*/
u16 attr;/* attributes */
u16 i_conf;/* I-CPLB DATA */
u16 d_conf;/* D-CPLB DATA */
diff -r 2202c155b8c3 -r ef957e3033e5 include/asm-ia64/sn/bte.h
--- a/include/asm-ia64/sn/bte.h Tue Mar 18 21:34:48 2008 -0700
+++ b/include/asm-ia64/sn/bte.h Wed Mar 19 21:01:45 2008 +0100
@@ -216,7 +216,7 @@
bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)

/*
- * The following is the prefered way of calling bte_unaligned_copy
+ * The following is the preferred way of calling bte_unaligned_copy
* If the copy is fully cache line aligned, then bte_copy is
* used instead. Since bte_copy is inlined, this saves a call
* stack. NOTE: bte_copy is called synchronously and does block
diff -r 2202c155b8c3 -r ef957e3033e5 include/linux/prefetch.h
--- a/include/linux/prefetch.h Tue Mar 18 21:34:48 2008 -0700
+++ b/include/linux/prefetch.h Wed Mar 19 21:01:45 2008 +0100
@@ -29,7 +29,7 @@
prefetchw(x) - prefetches the cacheline at "x" for write
spin_lock_prefetch(x) - prefetches the spinlock *x for taking

- there is also PREFETCH_STRIDE which is the architecure-prefered
+ there is also PREFETCH_STRIDE which is the architecure-preferred
"lookahead" size for prefetching streamed operations.

*/
diff -r 2202c155b8c3 -r ef957e3033e5 include/net/iw_handler.h
--- a/include/net/iw_handler.h Tue Mar 18 21:34:48 2008 -0700
+++ b/include/net/iw_handler.h Wed Mar 19 21:01:45 2008 +0100
@@ -129,7 +129,7 @@
*
* Functions prototype uses union iwreq_data
* -----------------------------------------
- * Some would have prefered functions defined this way :
+ * Some would have preferred functions defined this way :
* static int mydriver_ioctl_setrate(struct net_device *dev,
* long rate, int auto)
* 1) The kernel code doesn't "validate" the content of iwreq_data, and
diff -r 2202c155b8c3 -r ef957e3033e5 sound/pci/ice1712/ice1712.c
--- a/sound/pci/ice1712/ice1712.c Tue Mar 18 21:34:48 2008 -0700
+++ b/sound/pci/ice1712/ice1712.c Wed Mar 19 21:01:45 2008 +0100
@@ -2712,7 +2712,7 @@
return err;
}
if (c->mpu401_1_name)
- /* Prefered name available in card_info */
+ /* Preferred name available in card_info */
snprintf(ice->rmidi[0]->name,
sizeof(ice->rmidi[0]->name),
"%s %d", c->mpu401_1_name, card->number);
@@ -2729,7 +2729,7 @@
return err;
}
if (c->mpu401_2_name)
- /* Prefered name available in card_info */
+ /* Preferred name available in card_info */
snprintf(ice->rmidi[1]->name,
sizeof(ice->rmidi[1]->name),
"%s %d", c->mpu401_2_name,
--
:wq


\
 
 \ /
  Last update: 2008-03-19 23:07    [W:1.476 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site