lkml.org 
[lkml]   [2008]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 06/10] bcm43xx: replace limit_value macro with clamp_val
From
Date
kernel-provided clamp_val is identical, delete the private
limit_value helper.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
---
drivers/net/wireless/bcm43xx/bcm43xx.h | 16 ----------------
drivers/net/wireless/bcm43xx/bcm43xx_main.c | 12 ++++++------
drivers/net/wireless/bcm43xx/bcm43xx_phy.c | 16 ++++++++--------
drivers/net/wireless/bcm43xx/bcm43xx_radio.c | 12 ++++++------
drivers/net/wireless/bcm43xx/bcm43xx_wx.c | 2 +-
5 files changed, 21 insertions(+), 37 deletions(-)

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index 2ebd2ed..dc956b4 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -978,20 +978,4 @@ int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 valu
return pci_write_config_dword(bcm->pci_dev, offset, value);
}

-/** Limit a value between two limits */
-#ifdef limit_value
-# undef limit_value
-#endif
-#define limit_value(value, min, max) \
- ({ \
- typeof(value) __value = (value); \
- typeof(value) __min = (min); \
- typeof(value) __max = (max); \
- if (__value < __min) \
- __value = __min; \
- else if (__value > __max) \
- __value = __max; \
- __value; \
- })
-
#endif /* BCM43xx_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index b96a325..67d8765 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -1494,10 +1494,10 @@ static void handle_irq_noise(struct bcm43xx_private *bcm)
/* Get the noise samples. */
assert(bcm->noisecalc.nr_samples < 8);
i = bcm->noisecalc.nr_samples;
- noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
- noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
- noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
- noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
+ noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
bcm->noisecalc.samples[i][0] = radio->nrssi_lt[noise[0]];
bcm->noisecalc.samples[i][1] = radio->nrssi_lt[noise[1]];
bcm->noisecalc.samples[i][2] = radio->nrssi_lt[noise[2]];
@@ -2854,9 +2854,9 @@ static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm,
* The retry-limit is a 4-bit counter. Enforce this to avoid overflowing
* the chip-internal counter.
*/
- limit = limit_value(modparam_short_retry, 0, 0xF);
+ limit = clamp_val(modparam_short_retry, 0, 0xF);
bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0006, limit);
- limit = limit_value(modparam_long_retry, 0, 0xF);
+ limit = clamp_val(modparam_long_retry, 0, 0xF);
bcm43xx_shm_write32(bcm, BCM43xx_SHM_WIRELESS, 0x0007, limit);

bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x0044, 3);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index af3de33..1d909ed 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -1265,7 +1265,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
* the value 0x7FFFFFFF here. I think that is some weird
* compiler optimization in the original driver.
* Essentially, what we do here is resetting all NRSSI LT
- * entries to -32 (see the limit_value() in nrssi_hw_update())
+ * entries to -32 (see the clamp_val() in nrssi_hw_update())
*/
bcm43xx_nrssi_hw_update(bcm, 0xFFFF);
bcm43xx_calc_nrssi_threshold(bcm);
@@ -1908,13 +1908,13 @@ static s8 bcm43xx_phy_estimate_power_out(struct bcm43xx_private *bcm, s8 tssi)
switch (phy->type) {
case BCM43xx_PHYTYPE_A:
tmp += 0x80;
- tmp = limit_value(tmp, 0x00, 0xFF);
+ tmp = clamp_val(tmp, 0x00, 0xFF);
dbm = phy->tssi2dbm[tmp];
TODO(); //TODO: There's a FIXME on the specs
break;
case BCM43xx_PHYTYPE_B:
case BCM43xx_PHYTYPE_G:
- tmp = limit_value(tmp, 0x00, 0x3F);
+ tmp = clamp_val(tmp, 0x00, 0x3F);
dbm = phy->tssi2dbm[tmp];
break;
default:
@@ -1998,7 +1998,7 @@ void bcm43xx_phy_xmitpower(struct bcm43xx_private *bcm)
where REG is the max power as per the regulatory domain
*/

- desired_pwr = limit_value(radio->txpower_desired, 0, max_pwr);
+ desired_pwr = clamp_val(radio->txpower_desired, 0, max_pwr);
/* Check if we need to adjust the current power. */
pwr_adjust = desired_pwr - estimated_pwr;
radio_att_delta = -(pwr_adjust + 7) >> 3;
@@ -2034,7 +2034,7 @@ void bcm43xx_phy_xmitpower(struct bcm43xx_private *bcm)
radio_attenuation++;
}
}
- baseband_attenuation = limit_value(baseband_attenuation, 0, 11);
+ baseband_attenuation = clamp_val(baseband_attenuation, 0, 11);

txpower = radio->txctl1;
if ((radio->version == 0x2050) && (radio->revision == 2)) {
@@ -2059,8 +2059,8 @@ void bcm43xx_phy_xmitpower(struct bcm43xx_private *bcm)
}
}
radio->txctl1 = txpower;
- baseband_attenuation = limit_value(baseband_attenuation, 0, 11);
- radio_attenuation = limit_value(radio_attenuation, 0, 9);
+ baseband_attenuation = clamp_val(baseband_attenuation, 0, 11);
+ radio_attenuation = clamp_val(radio_attenuation, 0, 9);

bcm43xx_phy_lock(bcm, phylock_flags);
bcm43xx_radio_lock(bcm);
@@ -2102,7 +2102,7 @@ s8 bcm43xx_tssi2dbm_entry(s8 entry [], u8 index, s16 pab0, s16 pab1, s16 pab2)
f = q;
i++;
} while (delta >= 2);
- entry[index] = limit_value(bcm43xx_tssi2dbm_ad(m1 * f, 8192), -127, 128);
+ entry[index] = clamp_val(bcm43xx_tssi2dbm_ad(m1 * f, 8192), -127, 128);
return 0;
}

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
index c605099..2a05b67 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
@@ -343,7 +343,7 @@ void bcm43xx_nrssi_hw_update(struct bcm43xx_private *bcm, u16 val)
for (i = 0; i < 64; i++) {
tmp = bcm43xx_nrssi_hw_read(bcm, i);
tmp -= val;
- tmp = limit_value(tmp, -32, 31);
+ tmp = clamp_val(tmp, -32, 31);
bcm43xx_nrssi_hw_write(bcm, i, tmp);
}
}
@@ -360,7 +360,7 @@ void bcm43xx_nrssi_mem_update(struct bcm43xx_private *bcm)
tmp = (i - delta) * radio->nrssislope;
tmp /= 0x10000;
tmp += 0x3A;
- tmp = limit_value(tmp, 0, 0x3F);
+ tmp = clamp_val(tmp, 0, 0x3F);
radio->nrssi_lt[i] = tmp;
}
}
@@ -801,7 +801,7 @@ void bcm43xx_calc_nrssi_threshold(struct bcm43xx_private *bcm)
} else
threshold = radio->nrssi[1] - 5;

- threshold = limit_value(threshold, 0, 0x3E);
+ threshold = clamp_val(threshold, 0, 0x3E);
bcm43xx_phy_read(bcm, 0x0020); /* dummy read */
bcm43xx_phy_write(bcm, 0x0020, (((u16)threshold) << 8) | 0x001C);

@@ -851,7 +851,7 @@ void bcm43xx_calc_nrssi_threshold(struct bcm43xx_private *bcm)
else
a += 32;
a = a >> 6;
- a = limit_value(a, -31, 31);
+ a = clamp_val(a, -31, 31);

b = b * (radio->nrssi[1] - radio->nrssi[0]);
b += (radio->nrssi[0] << 6);
@@ -860,7 +860,7 @@ void bcm43xx_calc_nrssi_threshold(struct bcm43xx_private *bcm)
else
b += 32;
b = b >> 6;
- b = limit_value(b, -31, 31);
+ b = clamp_val(b, -31, 31);

tmp_u16 = bcm43xx_phy_read(bcm, 0x048A) & 0xF000;
tmp_u16 |= ((u32)b & 0x0000003F);
@@ -1919,7 +1919,7 @@ void bcm43xx_radio_set_txpower_a(struct bcm43xx_private *bcm, u16 txpower)
struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
u16 pamp, base, dac, ilt;

- txpower = limit_value(txpower, 0, 63);
+ txpower = clamp_val(txpower, 0, 63);

pamp = bcm43xx_get_txgain_freq_power_amp(txpower);
pamp <<= 5;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index 6acfdc4..c5d9aca 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -466,7 +466,7 @@ static int bcm43xx_wx_set_xmitpower(struct net_device *net_dev,
maxpower = bcm->sprom.maxpower_aphy;
else
maxpower = bcm->sprom.maxpower_bgphy;
- radio->txpower_desired = limit_value(data->txpower.value << 2,
+ radio->txpower_desired = clamp_val(data->txpower.value << 2,
0, maxpower);
bcm43xx_phy_xmitpower(bcm);
}
--
1.5.4.4.653.g7cf1e



\
 
 \ /
  Last update: 2008-03-14 06:23    [W:0.050 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site