lkml.org 
[lkml]   [2008]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectpanic caused by 653a00c9662304ef72a3eb4e681c91720960e0b4 (ACPI:thermal fixup)
Hi,

I have seen a panic with current kernels in the acpi_thermal code.
Bisecting shows that it is due to commit
653a00c9662304ef72a3eb4e681c91720960e0b4 (ACPI: thermal fixup)

The kernel before this commit works and I have this messages:

ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (26 C)

I.e. one thermal_zone device registered.
With above commit I get this panic:

ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
general protection fault: 0000 [1] SMP
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.24-06491-g653a00c-dirty #21
RIP: 0010:[<ffffffff81161813>] [<ffffffff81161813>] acpi_ns_map_handle_to_node+\
0x14/0x1d
RSP: 0000:ffff81007eb7fc58 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000001001 RCX: 0000000000000000
RDX: 0000000000004a21 RSI: ffffc200002a32f8 RDI: 4d52454854584e4c
RBP: 4d52454854584e4c R08: ffff81007d876460 R09: 0000000000000000
R10: 0000000000000246 R11: ffff81007eb637d0 R12: ffff81007eb7fcd0
R13: ffffffff8116ae54 R14: 0000000000000002 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff814b3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff81007eb7e000, task ffff81007eb637d0)
Stack: ffffffff81160cae 00000000fffffff4 ffff81007eb7fcd0 ffff81007d87a800
0000000000000000 ffff81007eb7fcd0 ffffffff8116a6ac 0000000000000001
ffffffff81175f9f ffff81007d876460 ffffffff812337f7 ffff81007d879c00
Call Trace:
[<ffffffff81160cae>] ? acpi_get_data+0x3e/0x6e
[<ffffffff8116a6ac>] ? acpi_bus_get_device+0x1d/0x2e
[<ffffffff81175f9f>] ? acpi_thermal_cooling_device_cb+0x67/0x16b
[<ffffffff812337f7>] ? thermal_zone_bind_cooling_device+0x0/0x1f3
[<ffffffff81233532>] ? thermal_zone_device_register+0x243/0x2b7
[<ffffffff8117620c>] ? acpi_thermal_add+0x151/0x40e
[<ffffffff8116c1de>] ? acpi_device_probe+0x43/0x91
[<ffffffff8119d768>] ? driver_probe_device+0xb5/0x132
[<ffffffff8119d92d>] ? __driver_attach+0x90/0xcd
[<ffffffff8119d89d>] ? __driver_attach+0x0/0xcd
[<ffffffff8119d89d>] ? __driver_attach+0x0/0xcd
[<ffffffff8119caf4>] ? bus_for_each_dev+0x44/0x6f
[<ffffffff8119d393>] ? bus_add_driver+0xae/0x1f7
[<ffffffff8119db86>] ? driver_register+0x59/0xce
[<ffffffff814e6447>] ? acpi_thermal_init+0x61/0x84
[<ffffffff814d26f2>] ? kernel_init+0x175/0x2df
[<ffffffff8100cc48>] ? child_rip+0xa/0x12
[<ffffffff814d257d>] ? kernel_init+0x0/0x2df
[<ffffffff8100cc3e>] ? child_rip+0x0/0x12


Code: 00 c3 49 ff c1 48 83 c6 04 41 ff c8 45 85 c0 75 a8 31 c0 c6 06 00 c3 48 8d\
47 ff 48 83 f8 fd 76 08 48 8b 05 e0 bf 42 00 c3 31 c0 <80> 7f 08 0f 48 0f 44 c7\
c3 48 89 f8 c3 31 c0 48 85 ff 74 0d f6
RIP [<ffffffff81161813>] acpi_ns_map_handle_to_node+0x14/0x1d
RSP <ffff81007eb7fc58>
---[ end trace 778e504de7e3b1e3 ]---
Kernel panic - not syncing: Attempted to kill init!

Of course when booting the kernel with thermal.off=1 there is no
panic. I am not sure wether the thermal zone info is correctly set up
as I am not that familar with it but of course the kernel should not
panic.

I've done a test run with all the acpi.debug stuff enabled (even the
function traces, which produced much too much output).
Maybe the most important lines of that debug output are:

nsutils-0869 [00] ns_get_node : _HOT, AE_NOT_FOUND
nsutils-0869 [00] ns_get_node : _AC0, AE_NOT_FOUND
nsutils-0869 [00] ns_get_node : _TZD, AE_NOT_FOUND
nsutils-0869 [00] ns_get_node : _SCP, AE_NOT_FOUND
nsutils-0869 [00] ns_get_node : _TZP, AE_NOT_FOUND

Any ideas what's happening here?


Thanks,

Andreas




\
 
 \ /
  Last update: 2008-03-14 15:49    [W:0.037 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site