lkml.org 
[lkml]   [2008]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subjectpatch pm-make-wakeup-flags-available-whenever-config_pm-is-set.patch added to gregkh-2.6 tree
From
Date

This is a note to let you know that I've just added the patch titled

Subject: PM: make wakeup flags available whenever CONFIG_PM is set

to my gregkh-2.6 tree. Its filename is

pm-make-wakeup-flags-available-whenever-config_pm-is-set.patch

This tree can be found at
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/


From rjw@sisk.pl Thu Mar 13 13:46:04 2008
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 12 Mar 2008 01:01:47 +0100
Subject: PM: make wakeup flags available whenever CONFIG_PM is set
To: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>, Andrew Morton <akpm@linux-foundation.org>, David Brownell <david-b@pacbell.net>, LKML <linux-kernel@vger.kernel.org>, Pavel Machek <pavel@ucw.cz>, pm list <linux-pm@lists.linux-foundation.org>
Message-ID: <200803120101.48805.rjw@sisk.pl>
Content-Disposition: inline

From: Alan Stern <stern@rowland.harvard.edu>

The various wakeup flags and their accessor macros in struct
dev_pm_info should be available whenever CONFIG_PM is enabled, not
just when CONFIG_PM_SLEEP is on. Otherwise remote wakeup won't always
be configurable for runtime power management. This patch (as1056)
fixes the oversight.

[rjw: rebased the patch on top of the previous two.]

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/base/power/main.c | 2 -
drivers/base/power/sysfs.c | 2 +
include/linux/pm.h | 64 +++++++++++++++++++++++++--------------------
3 files changed, 38 insertions(+), 30 deletions(-)

--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -57,8 +57,6 @@ static DEFINE_MUTEX(dpm_list_mtx);
/* 'true' if all devices have been suspended, protected by dpm_list_mtx */
static bool all_sleeping;

-int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
/**
* device_pm_add - add a device to the list of active devices
* @dev: Device to be added to the list
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -6,6 +6,8 @@
#include <linux/string.h>
#include "power.h"

+int (*platform_enable_wakeup)(struct device *dev, int is_on);
+

/*
* wakeup - Report/change current wakeup option for device
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -183,9 +183,9 @@ typedef struct pm_message {
struct dev_pm_info {
pm_message_t power_state;
unsigned can_wakeup:1;
+ unsigned should_wakeup:1;
bool sleeping:1; /* Owned by the PM core */
#ifdef CONFIG_PM_SLEEP
- unsigned should_wakeup:1;
struct list_head entry;
#endif
};
@@ -198,11 +198,6 @@ extern void device_resume(void);
extern int device_suspend(pm_message_t state);
extern int device_prepare_suspend(pm_message_t state);

-#define device_set_wakeup_enable(dev,val) \
- ((dev)->power.should_wakeup = !!(val))
-#define device_may_wakeup(dev) \
- (device_can_wakeup(dev) && (dev)->power.should_wakeup)
-
extern void __suspend_report_result(const char *function, void *fn, int ret);

#define suspend_report_result(fn, ret) \
@@ -210,6 +205,35 @@ extern void __suspend_report_result(cons
__suspend_report_result(__FUNCTION__, fn, ret); \
} while (0)

+#else /* !CONFIG_PM_SLEEP */
+
+static inline int device_suspend(pm_message_t state)
+{
+ return 0;
+}
+
+#define suspend_report_result(fn, ret) do {} while (0)
+
+#endif /* !CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+
+/* changes to device_may_wakeup take effect on the next pm state change.
+ * by default, devices should wakeup if they can.
+ */
+#define device_can_wakeup(dev) \
+ ((dev)->power.can_wakeup)
+#define device_init_wakeup(dev,val) \
+ do { \
+ device_can_wakeup(dev) = !!(val); \
+ device_set_wakeup_enable(dev,val); \
+ } while(0)
+
+#define device_set_wakeup_enable(dev,val) \
+ ((dev)->power.should_wakeup = !!(val))
+#define device_may_wakeup(dev) \
+ (device_can_wakeup(dev) && (dev)->power.should_wakeup)
+
/*
* Platform hook to activate device wakeup capability, if that's not already
* handled by enable_irq_wake() etc.
@@ -224,35 +248,19 @@ static inline int call_platform_enable_w
return 0;
}

-#else /* !CONFIG_PM_SLEEP */
-
-static inline int device_suspend(pm_message_t state)
-{
- return 0;
-}
-
-#define device_set_wakeup_enable(dev,val) do{}while(0)
-#define device_may_wakeup(dev) (0)
+#else /* !CONFIG_PM */

-#define suspend_report_result(fn, ret) do { } while (0)
+#define device_can_wakeup(dev) 0
+#define device_init_wakeup(dev,val) do {} while (0)
+#define device_set_wakeup_enable(dev,val) do {} while (0)
+#define device_may_wakeup(dev) 0

static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
{
return 0;
}

-#endif /* !CONFIG_PM_SLEEP */
-
-/* changes to device_may_wakeup take effect on the next pm state change.
- * by default, devices should wakeup if they can.
- */
-#define device_can_wakeup(dev) \
- ((dev)->power.can_wakeup)
-#define device_init_wakeup(dev,val) \
- do { \
- device_can_wakeup(dev) = !!(val); \
- device_set_wakeup_enable(dev,val); \
- } while(0)
+#endif /* !CONFIG_PM */

/*
* Global Power Management flags

Patches currently in gregkh-2.6 which might be from stern@rowland.harvard.edu are

usb/usb-convert-usb.h-struct-usb_device-to-kernel-doc.patch
usb/usb-make-usb_storage_onetouch-available-with-pm.patch
usb/usb-usb-ohci-sm501-driver-use-the-conventional-convention-for-suspend-and-resume.patch
usb/usb-reorganize-code-in-hub.c.patch
usb/usb-ehci-carry-out-port-handover-during-each-root-hub-resume.patch
usb/usb-new-quirk-flag-to-avoid-set-interface.patch
usb/drivers-usb-core-devio.c-suppress-warning-with-64k-page_size.patch
usb/usb-make-usb-persist-work-after-every-system-sleep.patch
usb/usb-remove-config_usb_persist-setting.patch
usb/usb-check-serial-number-string-after-device-reset.patch
usb/usb-enable-usb-persist-by-default.patch
usb/usb-remove-dev-power.power_state.patch
driver-core/pm-handle-device-registrations-during-suspend-resume.patch
driver-core/pm-make-wakeup-flags-available-whenever-config_pm-is-set.patch
driver-core/driver-core-call-device_pm_add-after-bus_add_device-in-device_add.patch


\
 
 \ /
  Last update: 2008-03-13 21:59    [W:1.927 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site