lkml.org 
[lkml]   [2008]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: 2.6.25-rc5-mm1 - x86_64 boot problem ?
    From
    Date
    On Tue, 2008-03-11 at 01:14 -0700, Andrew Morton wrote:
    > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.25-rc5/2.6.25-rc5-mm1/
    >

    I am having trouble booting rc5-mm1 on my x86_64. (ppc64 boots & works
    fine). Seems to be a networking issues (hangs on boot). Here are the
    messages on the console (not really useful to me).

    On a good kernel (rc5), the next set of messages would be ..

    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 13864 for ipc namespace ffffffff806903a0
    ..

    Sorry for not being really useful here. But would like to
    know if its a known issue ? Or should I start bisecting ?

    Thanks,
    Badari

    Linux version 2.6.25-rc5-mm1 (root@elm3b29) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Wed Mar 12 12:27:14 PDT 2008
    Command line: root=/dev/hda2 vga=0x314 crashkernel=64M@16M selinux=0 console=tty0 console=ttyS0,38400 resume=/dev/hda1 resume=/dev/hda1 splash=silent showopts
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ca000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000dfef0000 (usable)
    BIOS-e820: 00000000dfef0000 - 00000000dfeff000 (ACPI data)
    BIOS-e820: 00000000dfeff000 - 00000000dff00000 (ACPI NVS)
    BIOS-e820: 00000000dff00000 - 00000000e0000000 (usable)
    BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 00000001e0000000 (usable)
    end_pfn_map = 1966080
    DMI 2.3 present.
    ACPI: RSDP 000F6970, 0024 (r2 PTLTD )
    ACPI: XSDT DFEFC625, 003C (r1 PTLTD XSDT 6040000 LTP 0)
    ACPI: FACP DFEFED02, 00F4 (r3 AMD HAMMER 6040000 PTEC F4240)
    ACPI: DSDT DFEFC661, 262D (r1 AMD-K8 AMDACPI 6040000 MSFT 100000D)
    ACPI: FACS DFEFFFC0, 0040
    ACPI: SRAT DFEFEDF6, 0160 (r1 AMD HAMMER 6040000 AMD 1)
    ACPI: APIC DFEFEF56, 00AA (r1 PTLTD APIC 6040000 LTP 0)
    SRAT: PXM 0 -> APIC 0 -> Node 0
    SRAT: PXM 1 -> APIC 1 -> Node 1
    SRAT: PXM 2 -> APIC 2 -> Node 2
    SRAT: PXM 3 -> APIC 3 -> Node 3
    SRAT: Node 0 PXM 0 0-a0000
    SRAT: Node 0 PXM 0 0-e0000000
    SRAT: Node 0 PXM 0 0-180000000
    SRAT: PXM 1 (100000000-1a0000000) overlaps with PXM 0 (0-180000000)
    SRAT: SRAT not used.
    Scanning NUMA topology in Northbridge 24
    Number of nodes 4
    Node 0 MemBase 0000000000000000 Limit 0000000180000000
    Node 1 MemBase 0000000180000000 Limit 00000001a0000000
    Node 2 MemBase 00000001a0000000 Limit 00000001c0000000
    Node 3 MemBase 00000001c0000000 Limit 00000001e0000000
    Using node hash shift of 29
    Bootmem setup node 0 0000000000000000-0000000180000000
    NODE_DATA [0000000000011000 - 0000000000015fff]
    bootmap [0000000000016000 - 0000000000045fff] pages 30
    Bootmem setup node 1 0000000180000000-00000001a0000000
    NODE_DATA [0000000180000000 - 0000000180004fff]
    bootmap [0000000180005000 - 0000000180008fff] pages 4
    Bootmem setup node 2 00000001a0000000-00000001c0000000
    NODE_DATA [00000001a0000000 - 00000001a0004fff]
    bootmap [00000001a0005000 - 00000001a0008fff] pages 4
    Bootmem setup node 3 00000001c0000000-00000001e0000000
    NODE_DATA [00000001c0000000 - 00000001c0004fff]
    bootmap [00000001c0005000 - 00000001c0008fff] pages 4
    early res: 0 [0-fff] BIOS data page
    early res: 1 [6000-7fff] TRAMPOLINE
    early res: 2 [200000-82936f] TEXT DATA BSS
    early res: 3 [9f000-fffff] BIOS reserved
    early res: 4 [8000-10fff] PGTABLE
    Reserving 64MB of memory at 16MB for crashkernel (System RAM: 7680MB)
    [ffffe20005b00000-ffffe20005bfffff] potential offnode page_structs
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1966080
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0 -> 159
    0: 256 -> 917232
    0: 917248 -> 917504
    0: 1048576 -> 1572864
    1: 1572864 -> 1703936
    2: 1703936 -> 1835008
    3: 1835008 -> 1966080
    ACPI: PM-Timer IO Port: 0x8008
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    Processor #2
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    Processor #3
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x05] address[0xfa3e0000] gsi_base[24])
    IOAPIC[1]: apic_id 5, address 0xfa3e0000, GSI 24-27
    ACPI: IOAPIC (id[0x06] address[0xfa3e1000] gsi_base[28])
    IOAPIC[2]: apic_id 6, address 0xfa3e1000, GSI 28-31
    ACPI: IOAPIC (id[0x07] address[0xfa3e2000] gsi_base[32])
    IOAPIC[3]: apic_id 7, address 0xfa3e2000, GSI 32-35
    ACPI: IOAPIC (id[0x08] address[0xfa3e4000] gsi_base[36])
    IOAPIC[4]: apic_id 8, address 0xfa3e4000, GSI 36-39
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    Setting APIC routing to flat
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
    SMP: Allowing 4 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 40896 bytes of per cpu data
    Built 4 zonelists in Zone order, mobility grouping on. Total pages: 1806327
    Policy zone: Normal
    Kernel command line: root=/dev/hda2 vga=0x314 crashkernel=64M@16M selinux=0 console=tty0 console=ttyS0,38400 resume=/dev/hda1 resume=/dev/hda1 splash=silent showopts
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    TSC calibrated against PM_TIMER
    Marking TSC unstable due to TSCs unsynchronized
    time.c: Detected 1398.170 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    console [ttyS0] enabled
    Checking aperture...
    Node 0: aperture @ 0 size 32 MB
    No AGP bridge found
    Your BIOS doesn't leave a aperture memory hole
    Please enable the IOMMU option in the BIOS setup
    This costs you 64 MB of RAM
    Mapping aperture over 65536 KB of RAM @ 10000000
    Memory: 7098644k/7864320k available (3428k kernel code, 240936k reserved, 1472k data, 316k init)
    Calibrating delay using timer specific routine.. 2799.22 BogoMIPS (lpj=5598441)
    Security Framework initialized
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys debug
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 0/0 -> Node 0
    ACPI: Core revision 20070126
    Using local APIC timer interrupts.
    Detected 12.483 MHz APIC timer.
    Booting processor 1/4 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 2796.41 BogoMIPS (lpj=5592825)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 1/1 -> Node 1
    Opteron MP w/ 1MB stepping 00
    Booting processor 2/4 APIC 0x2
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 2796.42 BogoMIPS (lpj=5592842)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 2/2 -> Node 2
    Opteron MP w/ 1MB stepping 00
    Booting processor 3/4 APIC 0x3
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 2796.42 BogoMIPS (lpj=5592844)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 3/3 -> Node 3
    Opteron MP w/ 1MB stepping 00
    Brought up 4 CPUs
    net_namespace: 1016 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using configuration type 1
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    ACPI: PCI Root Bridge [PCI1] (0000:08)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 *10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI-DMA: Disabling AGP.
    PCI-DMA: aperture base @ 10000000 size 65536 KB
    PCI-DMA: using GART IOMMU.
    PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    system 00:05: ioport range 0x4d0-0x4d1 has been reserved
    system 00:05: ioport range 0x1100-0x117f has been reserved
    system 00:05: ioport range 0x1180-0x11ff has been reserved
    system 00:05: ioport range 0xb78-0xb7b has been reserved
    system 00:05: ioport range 0x190-0x193 has been reserved
    system 00:06: iomem range 0xe0000-0xfffff could not be reserved
    system 00:06: iomem range 0xc0000-0xc87ff has been reserved
    system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:06: iomem range 0xffc00000-0xfff7ffff has been reserved
    system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved
    system 00:06: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:06: iomem range 0xfe000000-0xfe000fff has been reserved
    system 00:06: iomem range 0xfe001000-0xfe001fff has been reserved
    system 00:06: iomem range 0xfe002000-0xfe003fff has been reserved
    system 00:06: iomem range 0xfe004000-0xfe004fff has been reserved
    PCI: Bridge: 0000:00:06.0
    Time: acpi_pm clocksource has been installed.
    IO window: 2000-2fff
    MEM window: 0xfa000000-0xfa0fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:09:01.0
    IO window: disabled.
    MEM window: 0xfa400000-0xfaffffff
    PREFETCH window: 0x00000000fc000000-0x00000000fdffffff
    PCI: Bridge: 0000:08:01.0
    IO window: disabled.
    MEM window: 0xfa400000-0xfaffffff
    PREFETCH window: 0x00000000fc000000-0x00000000fdffffff
    PCI: Bridge: 0000:08:02.0
    IO window: 3000-3fff
    MEM window: 0xfb000000-0xfb0fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:08:03.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:08:04.0
    IO window: 4000-4fff
    MEM window: 0xfb100000-0xfb1fffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 36 (level, low) -> IRQ 36
    NET: Registered protocol family 2





    \
     
     \ /
      Last update: 2008-03-12 19:11    [W:0.034 / U:61.580 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site