Messages in this thread Patch in this message | | | From | Bartlomiej Zolnierkiewicz <> | Subject | [PATCH 3/5] ide: add "ignore_cable" kernel parameter | Date | Tue, 11 Mar 2008 00:47:08 +0100 |
| |
Add "ignore_cable" kernel parameter:
* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")
* "ignore_cable=[interface_number]" module parameter (for ide_core module) if IDE is compiled as module
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --- Documentation/ide/ide.txt | 15 ++++++++++----- drivers/ide/ide.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 5 deletions(-)
Index: b/Documentation/ide/ide.txt =================================================================== --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -242,11 +242,6 @@ Summary of ide driver parameters for ker "idex=reset" : reset interface after probe - "idex=ata66" : informs the interface that it has an 80c cable - for chipsets that are ATA-66 capable, but the - ability to bit test for detection is currently - unknown. - "ide=reverse" : formerly called to pci sub-system, but now local. The following are valid ONLY on ide0, which usually corresponds @@ -275,6 +270,16 @@ are detected automatically). You also need to use "probe" kernel parameter for ide-4drives driver (support for IDE generic chipset with four drives on one port). +To force ignoring cable detection (this should be needed only if you're using +short 40-wires cable which cannot be automatically detected - if this is not +a case please report it as a bug instead) use "ignore_cable" kernel parameter: + +* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in + (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1") + +* "ignore_cable=[interface_number]" module parameter (for ide_core module) + if IDE is compiled as module + ================================================================================ Some Terminology Index: b/drivers/ide/ide.c =================================================================== --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1257,6 +1257,38 @@ struct class ide_port_class = { .release = ide_port_class_release, }; +static unsigned int ide_ignore_cable; + +static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) +{ + unsigned long i = simple_strtoul(s, NULL, 0); + + if (i >= MAX_HWIFS) + return -EINVAL; + + ide_ignore_cable |= (1 << i); + + return 0; +} + +module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0); +MODULE_PARM_DESC(ignore_cable, "ignore cable detection"); + +static void __init ide_apply_params(void) +{ + int i; + + for (i = 0; i < MAX_HWIFS; i++) { + ide_hwif_t *hwif = &ide_hwifs[i]; + + if (ide_ignore_cable & (1 << i)) { + printk(KERN_INFO "ide: ignoring cable detection for " + "ide%d\n", i); + hwif->cbl = ATA_CBL_PATA40_SHORT; + } + } +} + /* * This is gets invoked once during initialization, to set *everything* up */ @@ -1285,6 +1317,8 @@ static int __init ide_init(void) proc_ide_create(); + ide_apply_params(); + return 0; out_port_class:
| |