[lkml]   [2008]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Kernel Panic in MPT SAS on 2.6.24 (and,
Am Thursday, den  7 February hub Krzysztof Oledzki folgendes in die Tasten:


> >While installing my new firewall I got the following kernel panic in
> >the MPT SAS driver which I need for the disks.

> >The first kernel I bootet was which did panic so I tried a
> >2.6.24 which panics, too. Our usual FAI kernel ( is also
> >affected.

> Could you please try 2.6.22-stable?

Yes it works :-/

I've put some things which on the web which might be helpful:

lspci -v

I'll search for the last working kernel and try to break it down to a
commit tommorow when I can get a serial console or direct access.
The Java driven console redirection is everything else than fulfilling :-(

> It looks *very* similar to my problem:


It seems to be the same controller:

01:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
Subsystem: Dell Unknown device 1f10
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at ec00 [size=256]
Memory at fc8fc000 (64-bit, non-prefetchable) [size=16K]
Memory at fc8e0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fc900000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Capabilities: [68] Express Endpoint IRQ 0
Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1

Stay tuned.

Follow the white penguin.

 \ /
  Last update: 2008-02-08 02:23    [W:0.083 / U:23.772 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site