lkml.org 
[lkml]   [2008]   [Feb]   [7]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
DateThu, 7 Feb 2008 12:47:49 -0800
FromGreg KH <>
Subject[patch 30/45] sky2: fix for WOL on some devices
2.6.24-stable review patch.  If anyone has any objections, please let us know.

------------------
From: Stephen Hemminger <shemminger@linux-foundation.org>
patch 82637e808478087ce861129745fa60cc37e7929d in mainline

This patch disables config mode access after clearing PCI settings.
Without this change WOL won't work on some BIOS's

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/net/sky2.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -621,6 +621,7 @@ static void sky2_phy_power(struct sky2_h
 	static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
 	static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	/* Turn on/off phy power saving */
 	if (onoff)
@@ -632,7 +633,8 @@ static void sky2_phy_power(struct sky2_h
 		reg1 |= coma_mode[port];
 
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+	sky2_pci_read32(hw, PCI_DEV_REG1);
 
 	udelay(100);
 }
@@ -2427,6 +2429,7 @@ static void sky2_hw_intr(struct sky2_hw 
 	if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
 		u16 pci_err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		pci_err = sky2_pci_read16(hw, PCI_STATUS);
 		if (net_ratelimit())
 			dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2434,12 +2437,14 @@ static void sky2_hw_intr(struct sky2_hw 
 
 		sky2_pci_write16(hw, PCI_STATUS,
 				      pci_err | PCI_STATUS_ERROR_BITS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
 		u32 err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
 			     0xfffffffful);
@@ -2447,6 +2452,7 @@ static void sky2_hw_intr(struct sky2_hw 
 			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 
 		sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -2812,6 +2818,7 @@ static void sky2_reset(struct sky2_hw *h
 	}
 
 	sky2_power_on(hw);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 	for (i = 0; i < hw->ports; i++) {
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
-- 


\
 
 \ /
  Last update: 2008-02-07 22:09    [from the cache]
©2003-2008