lkml.org 
[lkml]   [2008]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 3/9] ieee1394: sbp2: add INQUIRY delay workaround
Add the same workaround as found in fw-sbp2 for feature parity and
compatibility of the workarounds module parameter.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/ieee1394/sbp2.c | 12 ++++++++++++
drivers/ieee1394/sbp2.h | 2 ++
2 files changed, 14 insertions(+)

Index: linux/drivers/ieee1394/sbp2.c
===================================================================
--- linux.orig/drivers/ieee1394/sbp2.c
+++ linux/drivers/ieee1394/sbp2.c
@@ -183,6 +183,9 @@ MODULE_PARM_DESC(exclusive_login, "Exclu
* Avoids access beyond actual disk limits on devices with an off-by-one bug.
* Don't use this with devices which don't have this bug.
*
+ * - delay inquiry
+ * Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
+ *
* - override internal blacklist
* Instead of adding to the built-in blacklist, use only the workarounds
* specified in the module load parameter.
@@ -195,6 +198,7 @@ MODULE_PARM_DESC(workarounds, "Work arou
", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36)
", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+ ", delay inquiry = " __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");

@@ -357,6 +361,11 @@ static const struct {
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
SBP2_WORKAROUND_MODE_SENSE_8,
},
+ /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+ .firmware_revision = 0x002800,
+ .model_id = 0x000000,
+ .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY,
+ },
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
.model_id = SBP2_ROM_VALUE_WILDCARD,
@@ -914,6 +923,9 @@ static int sbp2_start_device(struct sbp2
sbp2_agent_reset(lu, 1);
sbp2_max_speed_and_size(lu);

+ if (lu->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
+ ssleep(SBP2_INQUIRY_DELAY);
+
error = scsi_add_device(lu->shost, 0, lu->ud->id, 0);
if (error) {
SBP2_ERR("scsi_add_device failed");
Index: linux/drivers/ieee1394/sbp2.h
===================================================================
--- linux.orig/drivers/ieee1394/sbp2.h
+++ linux/drivers/ieee1394/sbp2.h
@@ -343,6 +343,8 @@ enum sbp2lu_state_types {
#define SBP2_WORKAROUND_INQUIRY_36 0x2
#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
+#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10
+#define SBP2_INQUIRY_DELAY 12
#define SBP2_WORKAROUND_OVERRIDE 0x100

#endif /* SBP2_H */
--
Stefan Richter
-=====-==--- --=- ---==
http://arcgraph.de/sr/


\
 
 \ /
  Last update: 2008-02-03 23:11    [W:0.204 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site