lkml.org 
[lkml]   [2008]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] x86 PM: Move 64-bit hibernation files to arch/x86/power
Date
From: Rafael J. Wysocki <rjw@sisk.pl>

Move arch/x86/kernel/suspend_64.c to arch/x86/power .

Move arch/x86/kernel/suspend_asm_64.S to arch/x86/power
as hibernate_asm_64.S .

Update purpose and copyright information in
arch/x86/power/suspend_64.c and
arch/x86/power/hibernate_asm_64.S .

Update the Makefiles in arch/x86, arch/x86/kernel and
arch/x86/power to reflect the above changes.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
arch/x86/Makefile | 4
arch/x86/kernel/Makefile | 2
arch/x86/kernel/suspend_64.c | 320 -------------------------------------
arch/x86/kernel/suspend_asm_64.S | 141 ----------------
arch/x86/power/Makefile | 9 -
arch/x86/power/hibernate_asm_64.S | 146 +++++++++++++++++
arch/x86/power/suspend_64.c | 321 ++++++++++++++++++++++++++++++++++++++
7 files changed, 477 insertions(+), 466 deletions(-)

Index: linux-2.6/arch/x86/kernel/suspend_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/suspend_64.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Suspend support specific for i386.
- *
- * Distribute under GPLv2
- *
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
- * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
- */
-
-#include <linux/smp.h>
-#include <linux/suspend.h>
-#include <asm/proto.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mtrr.h>
-
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
-
-static void fix_processor_context(void);
-
-struct saved_context saved_context;
-
-/**
- * __save_processor_state - save CPU registers before creating a
- * hibernation image and before restoring the memory state from it
- * @ctxt - structure to store the registers contents in
- *
- * NOTE: If there is a CPU register the modification of which by the
- * boot kernel (ie. the kernel used for loading the hibernation image)
- * might affect the operations of the restored target kernel (ie. the one
- * saved in the hibernation image), then its contents must be saved by this
- * function. In other words, if kernel A is hibernated and different
- * kernel B is used for loading the hibernation image into memory, the
- * kernel A's __save_processor_state() function must save all registers
- * needed by kernel A, so that it can operate correctly after the resume
- * regardless of what kernel B does in the meantime.
- */
-static void __save_processor_state(struct saved_context *ctxt)
-{
- kernel_fpu_begin();
-
- /*
- * descriptor tables
- */
- store_gdt((struct desc_ptr *)&ctxt->gdt_limit);
- store_idt((struct desc_ptr *)&ctxt->idt_limit);
- store_tr(ctxt->tr);
-
- /* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
- /*
- * segment registers
- */
- asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
- asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
- asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
- asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs));
- asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss));
-
- rdmsrl(MSR_FS_BASE, ctxt->fs_base);
- rdmsrl(MSR_GS_BASE, ctxt->gs_base);
- rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
- mtrr_save_fixed_ranges(NULL);
-
- /*
- * control registers
- */
- rdmsrl(MSR_EFER, ctxt->efer);
- ctxt->cr0 = read_cr0();
- ctxt->cr2 = read_cr2();
- ctxt->cr3 = read_cr3();
- ctxt->cr4 = read_cr4();
- ctxt->cr8 = read_cr8();
-}
-
-void save_processor_state(void)
-{
- __save_processor_state(&saved_context);
-}
-
-static void do_fpu_end(void)
-{
- /*
- * Restore FPU regs if necessary
- */
- kernel_fpu_end();
-}
-
-/**
- * __restore_processor_state - restore the contents of CPU registers saved
- * by __save_processor_state()
- * @ctxt - structure to load the registers contents from
- */
-static void __restore_processor_state(struct saved_context *ctxt)
-{
- /*
- * control registers
- */
- wrmsrl(MSR_EFER, ctxt->efer);
- write_cr8(ctxt->cr8);
- write_cr4(ctxt->cr4);
- write_cr3(ctxt->cr3);
- write_cr2(ctxt->cr2);
- write_cr0(ctxt->cr0);
-
- /*
- * now restore the descriptor tables to their proper values
- * ltr is done i fix_processor_context().
- */
- load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
- load_idt((const struct desc_ptr *)&ctxt->idt_limit);
-
-
- /*
- * segment registers
- */
- asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
- asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
- asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
- load_gs_index(ctxt->gs);
- asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
-
- wrmsrl(MSR_FS_BASE, ctxt->fs_base);
- wrmsrl(MSR_GS_BASE, ctxt->gs_base);
- wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
-
- fix_processor_context();
-
- do_fpu_end();
- mtrr_ap_init();
-}
-
-void restore_processor_state(void)
-{
- __restore_processor_state(&saved_context);
-}
-
-static void fix_processor_context(void)
-{
- int cpu = smp_processor_id();
- struct tss_struct *t = &per_cpu(init_tss, cpu);
-
- /*
- * This just modifies memory; should not be necessary. But... This
- * is necessary, because 386 hardware has concept of busy TSS or some
- * similar stupidity.
- */
- set_tss_desc(cpu, t);
-
- get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
-
- syscall_init(); /* This sets MSR_*STAR and related */
- load_TR_desc(); /* This does ltr */
- load_LDT(&current->active_mm->context); /* This does lldt */
-
- /*
- * Now maybe reload the debug registers
- */
- if (current->thread.debugreg7){
- loaddebug(&current->thread, 0);
- loaddebug(&current->thread, 1);
- loaddebug(&current->thread, 2);
- loaddebug(&current->thread, 3);
- /* no 4 and 5 */
- loaddebug(&current->thread, 6);
- loaddebug(&current->thread, 7);
- }
-}
-
-#ifdef CONFIG_HIBERNATION
-/* Defined in arch/x86_64/kernel/suspend_asm.S */
-extern int restore_image(void);
-
-/*
- * Address to jump to in the last phase of restore in order to get to the image
- * kernel's text (this value is passed in the image header).
- */
-unsigned long restore_jump_address;
-
-/*
- * Value of the cr3 register from before the hibernation (this value is passed
- * in the image header).
- */
-unsigned long restore_cr3;
-
-pgd_t *temp_level4_pgt;
-
-void *relocated_restore_code;
-
-static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
-{
- long i, j;
-
- i = pud_index(address);
- pud = pud + i;
- for (; i < PTRS_PER_PUD; pud++, i++) {
- unsigned long paddr;
- pmd_t *pmd;
-
- paddr = address + i*PUD_SIZE;
- if (paddr >= end)
- break;
-
- pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
- if (!pmd)
- return -ENOMEM;
- set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
- for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
- unsigned long pe;
-
- if (paddr >= end)
- break;
- pe = __PAGE_KERNEL_LARGE_EXEC | paddr;
- pe &= __supported_pte_mask;
- set_pmd(pmd, __pmd(pe));
- }
- }
- return 0;
-}
-
-static int set_up_temporary_mappings(void)
-{
- unsigned long start, end, next;
- int error;
-
- temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC);
- if (!temp_level4_pgt)
- return -ENOMEM;
-
- /* It is safe to reuse the original kernel mapping */
- set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
- init_level4_pgt[pgd_index(__START_KERNEL_map)]);
-
- /* Set up the direct mapping from scratch */
- start = (unsigned long)pfn_to_kaddr(0);
- end = (unsigned long)pfn_to_kaddr(end_pfn);
-
- for (; start < end; start = next) {
- pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
- if (!pud)
- return -ENOMEM;
- next = start + PGDIR_SIZE;
- if (next > end)
- next = end;
- if ((error = res_phys_pud_init(pud, __pa(start), __pa(next))))
- return error;
- set_pgd(temp_level4_pgt + pgd_index(start),
- mk_kernel_pgd(__pa(pud)));
- }
- return 0;
-}
-
-int swsusp_arch_resume(void)
-{
- int error;
-
- /* We have got enough memory and from now on we cannot recover */
- if ((error = set_up_temporary_mappings()))
- return error;
-
- relocated_restore_code = (void *)get_safe_page(GFP_ATOMIC);
- if (!relocated_restore_code)
- return -ENOMEM;
- memcpy(relocated_restore_code, &core_restore_code,
- &restore_registers - &core_restore_code);
-
- restore_image();
- return 0;
-}
-
-/*
- * pfn_is_nosave - check if given pfn is in the 'nosave' section
- */
-
-int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long nosave_begin_pfn = __pa_symbol(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long nosave_end_pfn = PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT;
- return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
-}
-
-struct restore_data_record {
- unsigned long jump_address;
- unsigned long cr3;
- unsigned long magic;
-};
-
-#define RESTORE_MAGIC 0x0123456789ABCDEFUL
-
-/**
- * arch_hibernation_header_save - populate the architecture specific part
- * of a hibernation image header
- * @addr: address to save the data at
- */
-int arch_hibernation_header_save(void *addr, unsigned int max_size)
-{
- struct restore_data_record *rdr = addr;
-
- if (max_size < sizeof(struct restore_data_record))
- return -EOVERFLOW;
- rdr->jump_address = restore_jump_address;
- rdr->cr3 = restore_cr3;
- rdr->magic = RESTORE_MAGIC;
- return 0;
-}
-
-/**
- * arch_hibernation_header_restore - read the architecture specific data
- * from the hibernation image header
- * @addr: address to read the data from
- */
-int arch_hibernation_header_restore(void *addr)
-{
- struct restore_data_record *rdr = addr;
-
- restore_jump_address = rdr->jump_address;
- restore_cr3 = rdr->cr3;
- return (rdr->magic == RESTORE_MAGIC) ? 0 : -EINVAL;
-}
-#endif /* CONFIG_HIBERNATION */
Index: linux-2.6/arch/x86/kernel/suspend_asm_64.S
===================================================================
--- linux-2.6.orig/arch/x86/kernel/suspend_asm_64.S
+++ /dev/null
@@ -1,141 +0,0 @@
-/* Copyright 2004,2005 Pavel Machek <pavel@suse.cz>, Andi Kleen <ak@suse.de>, Rafael J. Wysocki <rjw@sisk.pl>
- *
- * Distribute under GPLv2.
- *
- * swsusp_arch_resume must not use any stack or any nonlocal variables while
- * copying pages:
- *
- * Its rewriting one kernel image with another. What is stack in "old"
- * image could very well be data page in "new" image, and overwriting
- * your own stack under you is bad idea.
- */
-
- .text
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/asm-offsets.h>
-
-ENTRY(swsusp_arch_suspend)
- movq $saved_context, %rax
- movq %rsp, pt_regs_sp(%rax)
- movq %rbp, pt_regs_bp(%rax)
- movq %rsi, pt_regs_si(%rax)
- movq %rdi, pt_regs_di(%rax)
- movq %rbx, pt_regs_bx(%rax)
- movq %rcx, pt_regs_cx(%rax)
- movq %rdx, pt_regs_dx(%rax)
- movq %r8, pt_regs_r8(%rax)
- movq %r9, pt_regs_r9(%rax)
- movq %r10, pt_regs_r10(%rax)
- movq %r11, pt_regs_r11(%rax)
- movq %r12, pt_regs_r12(%rax)
- movq %r13, pt_regs_r13(%rax)
- movq %r14, pt_regs_r14(%rax)
- movq %r15, pt_regs_r15(%rax)
- pushfq
- popq pt_regs_flags(%rax)
-
- /* save the address of restore_registers */
- movq $restore_registers, %rax
- movq %rax, restore_jump_address(%rip)
- /* save cr3 */
- movq %cr3, %rax
- movq %rax, restore_cr3(%rip)
-
- call swsusp_save
- ret
-
-ENTRY(restore_image)
- /* switch to temporary page tables */
- movq $__PAGE_OFFSET, %rdx
- movq temp_level4_pgt(%rip), %rax
- subq %rdx, %rax
- movq %rax, %cr3
- /* Flush TLB */
- movq mmu_cr4_features(%rip), %rax
- movq %rax, %rdx
- andq $~(1<<7), %rdx # PGE
- movq %rdx, %cr4; # turn off PGE
- movq %cr3, %rcx; # flush TLB
- movq %rcx, %cr3;
- movq %rax, %cr4; # turn PGE back on
-
- /* prepare to jump to the image kernel */
- movq restore_jump_address(%rip), %rax
- movq restore_cr3(%rip), %rbx
-
- /* prepare to copy image data to their original locations */
- movq restore_pblist(%rip), %rdx
- movq relocated_restore_code(%rip), %rcx
- jmpq *%rcx
-
- /* code below has been relocated to a safe page */
-ENTRY(core_restore_code)
-loop:
- testq %rdx, %rdx
- jz done
-
- /* get addresses from the pbe and copy the page */
- movq pbe_address(%rdx), %rsi
- movq pbe_orig_address(%rdx), %rdi
- movq $(PAGE_SIZE >> 3), %rcx
- rep
- movsq
-
- /* progress to the next pbe */
- movq pbe_next(%rdx), %rdx
- jmp loop
-done:
- /* jump to the restore_registers address from the image header */
- jmpq *%rax
- /*
- * NOTE: This assumes that the boot kernel's text mapping covers the
- * image kernel's page containing restore_registers and the address of
- * this page is the same as in the image kernel's text mapping (it
- * should always be true, because the text mapping is linear, starting
- * from 0, and is supposed to cover the entire kernel text for every
- * kernel).
- *
- * code below belongs to the image kernel
- */
-
-ENTRY(restore_registers)
- /* go back to the original page tables */
- movq %rbx, %cr3
-
- /* Flush TLB, including "global" things (vmalloc) */
- movq mmu_cr4_features(%rip), %rax
- movq %rax, %rdx
- andq $~(1<<7), %rdx; # PGE
- movq %rdx, %cr4; # turn off PGE
- movq %cr3, %rcx; # flush TLB
- movq %rcx, %cr3
- movq %rax, %cr4; # turn PGE back on
-
- /* We don't restore %rax, it must be 0 anyway */
- movq $saved_context, %rax
- movq pt_regs_sp(%rax), %rsp
- movq pt_regs_bp(%rax), %rbp
- movq pt_regs_si(%rax), %rsi
- movq pt_regs_di(%rax), %rdi
- movq pt_regs_bx(%rax), %rbx
- movq pt_regs_cx(%rax), %rcx
- movq pt_regs_dx(%rax), %rdx
- movq pt_regs_r8(%rax), %r8
- movq pt_regs_r9(%rax), %r9
- movq pt_regs_r10(%rax), %r10
- movq pt_regs_r11(%rax), %r11
- movq pt_regs_r12(%rax), %r12
- movq pt_regs_r13(%rax), %r13
- movq pt_regs_r14(%rax), %r14
- movq pt_regs_r15(%rax), %r15
- pushq pt_regs_flags(%rax)
- popfq
-
- xorq %rax, %rax
-
- /* tell the hibernation core that we've just restored the memory */
- movq %rax, in_suspend(%rip)
-
- ret
Index: linux-2.6/arch/x86/power/hibernate_asm_64.S
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/power/hibernate_asm_64.S
@@ -0,0 +1,146 @@
+/*
+ * Hibernation support for x86-64
+ *
+ * Distribute under GPLv2.
+ *
+ * Copyright 2007 Rafael J. Wysocki <rjw@sisk.pl>
+ * Copyright 2005 Andi Kleen <ak@suse.de>
+ * Copyright 2004 Pavel Machek <pavel@suse.cz>
+ *
+ * swsusp_arch_resume must not use any stack or any nonlocal variables while
+ * copying pages:
+ *
+ * Its rewriting one kernel image with another. What is stack in "old"
+ * image could very well be data page in "new" image, and overwriting
+ * your own stack under you is bad idea.
+ */
+
+ .text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+
+ENTRY(swsusp_arch_suspend)
+ movq $saved_context, %rax
+ movq %rsp, pt_regs_sp(%rax)
+ movq %rbp, pt_regs_bp(%rax)
+ movq %rsi, pt_regs_si(%rax)
+ movq %rdi, pt_regs_di(%rax)
+ movq %rbx, pt_regs_bx(%rax)
+ movq %rcx, pt_regs_cx(%rax)
+ movq %rdx, pt_regs_dx(%rax)
+ movq %r8, pt_regs_r8(%rax)
+ movq %r9, pt_regs_r9(%rax)
+ movq %r10, pt_regs_r10(%rax)
+ movq %r11, pt_regs_r11(%rax)
+ movq %r12, pt_regs_r12(%rax)
+ movq %r13, pt_regs_r13(%rax)
+ movq %r14, pt_regs_r14(%rax)
+ movq %r15, pt_regs_r15(%rax)
+ pushfq
+ popq pt_regs_flags(%rax)
+
+ /* save the address of restore_registers */
+ movq $restore_registers, %rax
+ movq %rax, restore_jump_address(%rip)
+ /* save cr3 */
+ movq %cr3, %rax
+ movq %rax, restore_cr3(%rip)
+
+ call swsusp_save
+ ret
+
+ENTRY(restore_image)
+ /* switch to temporary page tables */
+ movq $__PAGE_OFFSET, %rdx
+ movq temp_level4_pgt(%rip), %rax
+ subq %rdx, %rax
+ movq %rax, %cr3
+ /* Flush TLB */
+ movq mmu_cr4_features(%rip), %rax
+ movq %rax, %rdx
+ andq $~(1<<7), %rdx # PGE
+ movq %rdx, %cr4; # turn off PGE
+ movq %cr3, %rcx; # flush TLB
+ movq %rcx, %cr3;
+ movq %rax, %cr4; # turn PGE back on
+
+ /* prepare to jump to the image kernel */
+ movq restore_jump_address(%rip), %rax
+ movq restore_cr3(%rip), %rbx
+
+ /* prepare to copy image data to their original locations */
+ movq restore_pblist(%rip), %rdx
+ movq relocated_restore_code(%rip), %rcx
+ jmpq *%rcx
+
+ /* code below has been relocated to a safe page */
+ENTRY(core_restore_code)
+loop:
+ testq %rdx, %rdx
+ jz done
+
+ /* get addresses from the pbe and copy the page */
+ movq pbe_address(%rdx), %rsi
+ movq pbe_orig_address(%rdx), %rdi
+ movq $(PAGE_SIZE >> 3), %rcx
+ rep
+ movsq
+
+ /* progress to the next pbe */
+ movq pbe_next(%rdx), %rdx
+ jmp loop
+done:
+ /* jump to the restore_registers address from the image header */
+ jmpq *%rax
+ /*
+ * NOTE: This assumes that the boot kernel's text mapping covers the
+ * image kernel's page containing restore_registers and the address of
+ * this page is the same as in the image kernel's text mapping (it
+ * should always be true, because the text mapping is linear, starting
+ * from 0, and is supposed to cover the entire kernel text for every
+ * kernel).
+ *
+ * code below belongs to the image kernel
+ */
+
+ENTRY(restore_registers)
+ /* go back to the original page tables */
+ movq %rbx, %cr3
+
+ /* Flush TLB, including "global" things (vmalloc) */
+ movq mmu_cr4_features(%rip), %rax
+ movq %rax, %rdx
+ andq $~(1<<7), %rdx; # PGE
+ movq %rdx, %cr4; # turn off PGE
+ movq %cr3, %rcx; # flush TLB
+ movq %rcx, %cr3
+ movq %rax, %cr4; # turn PGE back on
+
+ /* We don't restore %rax, it must be 0 anyway */
+ movq $saved_context, %rax
+ movq pt_regs_sp(%rax), %rsp
+ movq pt_regs_bp(%rax), %rbp
+ movq pt_regs_si(%rax), %rsi
+ movq pt_regs_di(%rax), %rdi
+ movq pt_regs_bx(%rax), %rbx
+ movq pt_regs_cx(%rax), %rcx
+ movq pt_regs_dx(%rax), %rdx
+ movq pt_regs_r8(%rax), %r8
+ movq pt_regs_r9(%rax), %r9
+ movq pt_regs_r10(%rax), %r10
+ movq pt_regs_r11(%rax), %r11
+ movq pt_regs_r12(%rax), %r12
+ movq pt_regs_r13(%rax), %r13
+ movq pt_regs_r14(%rax), %r14
+ movq pt_regs_r15(%rax), %r15
+ pushq pt_regs_flags(%rax)
+ popfq
+
+ xorq %rax, %rax
+
+ /* tell the hibernation core that we've just restored the memory */
+ movq %rax, in_suspend(%rip)
+
+ ret
Index: linux-2.6/arch/x86/power/suspend_64.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/power/suspend_64.c
@@ -0,0 +1,321 @@
+/*
+ * Suspend and hibernation support for x86-64
+ *
+ * Distribute under GPLv2
+ *
+ * Copyright (c) 2007 Rafael J. Wysocki <rjw@sisk.pl>
+ * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
+ */
+
+#include <linux/smp.h>
+#include <linux/suspend.h>
+#include <asm/proto.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mtrr.h>
+
+/* References to section boundaries */
+extern const void __nosave_begin, __nosave_end;
+
+static void fix_processor_context(void);
+
+struct saved_context saved_context;
+
+/**
+ * __save_processor_state - save CPU registers before creating a
+ * hibernation image and before restoring the memory state from it
+ * @ctxt - structure to store the registers contents in
+ *
+ * NOTE: If there is a CPU register the modification of which by the
+ * boot kernel (ie. the kernel used for loading the hibernation image)
+ * might affect the operations of the restored target kernel (ie. the one
+ * saved in the hibernation image), then its contents must be saved by this
+ * function. In other words, if kernel A is hibernated and different
+ * kernel B is used for loading the hibernation image into memory, the
+ * kernel A's __save_processor_state() function must save all registers
+ * needed by kernel A, so that it can operate correctly after the resume
+ * regardless of what kernel B does in the meantime.
+ */
+static void __save_processor_state(struct saved_context *ctxt)
+{
+ kernel_fpu_begin();
+
+ /*
+ * descriptor tables
+ */
+ store_gdt((struct desc_ptr *)&ctxt->gdt_limit);
+ store_idt((struct desc_ptr *)&ctxt->idt_limit);
+ store_tr(ctxt->tr);
+
+ /* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
+ /*
+ * segment registers
+ */
+ asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
+ asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
+ asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
+ asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs));
+ asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss));
+
+ rdmsrl(MSR_FS_BASE, ctxt->fs_base);
+ rdmsrl(MSR_GS_BASE, ctxt->gs_base);
+ rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+ mtrr_save_fixed_ranges(NULL);
+
+ /*
+ * control registers
+ */
+ rdmsrl(MSR_EFER, ctxt->efer);
+ ctxt->cr0 = read_cr0();
+ ctxt->cr2 = read_cr2();
+ ctxt->cr3 = read_cr3();
+ ctxt->cr4 = read_cr4();
+ ctxt->cr8 = read_cr8();
+}
+
+void save_processor_state(void)
+{
+ __save_processor_state(&saved_context);
+}
+
+static void do_fpu_end(void)
+{
+ /*
+ * Restore FPU regs if necessary
+ */
+ kernel_fpu_end();
+}
+
+/**
+ * __restore_processor_state - restore the contents of CPU registers saved
+ * by __save_processor_state()
+ * @ctxt - structure to load the registers contents from
+ */
+static void __restore_processor_state(struct saved_context *ctxt)
+{
+ /*
+ * control registers
+ */
+ wrmsrl(MSR_EFER, ctxt->efer);
+ write_cr8(ctxt->cr8);
+ write_cr4(ctxt->cr4);
+ write_cr3(ctxt->cr3);
+ write_cr2(ctxt->cr2);
+ write_cr0(ctxt->cr0);
+
+ /*
+ * now restore the descriptor tables to their proper values
+ * ltr is done i fix_processor_context().
+ */
+ load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
+ load_idt((const struct desc_ptr *)&ctxt->idt_limit);
+
+
+ /*
+ * segment registers
+ */
+ asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
+ asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
+ asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
+ load_gs_index(ctxt->gs);
+ asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
+
+ wrmsrl(MSR_FS_BASE, ctxt->fs_base);
+ wrmsrl(MSR_GS_BASE, ctxt->gs_base);
+ wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+
+ fix_processor_context();
+
+ do_fpu_end();
+ mtrr_ap_init();
+}
+
+void restore_processor_state(void)
+{
+ __restore_processor_state(&saved_context);
+}
+
+static void fix_processor_context(void)
+{
+ int cpu = smp_processor_id();
+ struct tss_struct *t = &per_cpu(init_tss, cpu);
+
+ /*
+ * This just modifies memory; should not be necessary. But... This
+ * is necessary, because 386 hardware has concept of busy TSS or some
+ * similar stupidity.
+ */
+ set_tss_desc(cpu, t);
+
+ get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
+
+ syscall_init(); /* This sets MSR_*STAR and related */
+ load_TR_desc(); /* This does ltr */
+ load_LDT(&current->active_mm->context); /* This does lldt */
+
+ /*
+ * Now maybe reload the debug registers
+ */
+ if (current->thread.debugreg7){
+ loaddebug(&current->thread, 0);
+ loaddebug(&current->thread, 1);
+ loaddebug(&current->thread, 2);
+ loaddebug(&current->thread, 3);
+ /* no 4 and 5 */
+ loaddebug(&current->thread, 6);
+ loaddebug(&current->thread, 7);
+ }
+}
+
+#ifdef CONFIG_HIBERNATION
+/* Defined in arch/x86_64/kernel/suspend_asm.S */
+extern int restore_image(void);
+
+/*
+ * Address to jump to in the last phase of restore in order to get to the image
+ * kernel's text (this value is passed in the image header).
+ */
+unsigned long restore_jump_address;
+
+/*
+ * Value of the cr3 register from before the hibernation (this value is passed
+ * in the image header).
+ */
+unsigned long restore_cr3;
+
+pgd_t *temp_level4_pgt;
+
+void *relocated_restore_code;
+
+static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+{
+ long i, j;
+
+ i = pud_index(address);
+ pud = pud + i;
+ for (; i < PTRS_PER_PUD; pud++, i++) {
+ unsigned long paddr;
+ pmd_t *pmd;
+
+ paddr = address + i*PUD_SIZE;
+ if (paddr >= end)
+ break;
+
+ pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
+ if (!pmd)
+ return -ENOMEM;
+ set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+ for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
+ unsigned long pe;
+
+ if (paddr >= end)
+ break;
+ pe = __PAGE_KERNEL_LARGE_EXEC | paddr;
+ pe &= __supported_pte_mask;
+ set_pmd(pmd, __pmd(pe));
+ }
+ }
+ return 0;
+}
+
+static int set_up_temporary_mappings(void)
+{
+ unsigned long start, end, next;
+ int error;
+
+ temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC);
+ if (!temp_level4_pgt)
+ return -ENOMEM;
+
+ /* It is safe to reuse the original kernel mapping */
+ set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
+ init_level4_pgt[pgd_index(__START_KERNEL_map)]);
+
+ /* Set up the direct mapping from scratch */
+ start = (unsigned long)pfn_to_kaddr(0);
+ end = (unsigned long)pfn_to_kaddr(end_pfn);
+
+ for (; start < end; start = next) {
+ pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
+ if (!pud)
+ return -ENOMEM;
+ next = start + PGDIR_SIZE;
+ if (next > end)
+ next = end;
+ if ((error = res_phys_pud_init(pud, __pa(start), __pa(next))))
+ return error;
+ set_pgd(temp_level4_pgt + pgd_index(start),
+ mk_kernel_pgd(__pa(pud)));
+ }
+ return 0;
+}
+
+int swsusp_arch_resume(void)
+{
+ int error;
+
+ /* We have got enough memory and from now on we cannot recover */
+ if ((error = set_up_temporary_mappings()))
+ return error;
+
+ relocated_restore_code = (void *)get_safe_page(GFP_ATOMIC);
+ if (!relocated_restore_code)
+ return -ENOMEM;
+ memcpy(relocated_restore_code, &core_restore_code,
+ &restore_registers - &core_restore_code);
+
+ restore_image();
+ return 0;
+}
+
+/*
+ * pfn_is_nosave - check if given pfn is in the 'nosave' section
+ */
+
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long nosave_begin_pfn = __pa_symbol(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long nosave_end_pfn = PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT;
+ return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
+}
+
+struct restore_data_record {
+ unsigned long jump_address;
+ unsigned long cr3;
+ unsigned long magic;
+};
+
+#define RESTORE_MAGIC 0x0123456789ABCDEFUL
+
+/**
+ * arch_hibernation_header_save - populate the architecture specific part
+ * of a hibernation image header
+ * @addr: address to save the data at
+ */
+int arch_hibernation_header_save(void *addr, unsigned int max_size)
+{
+ struct restore_data_record *rdr = addr;
+
+ if (max_size < sizeof(struct restore_data_record))
+ return -EOVERFLOW;
+ rdr->jump_address = restore_jump_address;
+ rdr->cr3 = restore_cr3;
+ rdr->magic = RESTORE_MAGIC;
+ return 0;
+}
+
+/**
+ * arch_hibernation_header_restore - read the architecture specific data
+ * from the hibernation image header
+ * @addr: address to read the data from
+ */
+int arch_hibernation_header_restore(void *addr)
+{
+ struct restore_data_record *rdr = addr;
+
+ restore_jump_address = rdr->jump_address;
+ restore_cr3 = rdr->cr3;
+ return (rdr->magic == RESTORE_MAGIC) ? 0 : -EINVAL;
+}
+#endif /* CONFIG_HIBERNATION */
Index: linux-2.6/arch/x86/kernel/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/kernel/Makefile
+++ linux-2.6/arch/x86/kernel/Makefile
@@ -82,8 +82,6 @@ ifeq ($(CONFIG_X86_64),y)
obj-y += genapic_64.o genapic_flat_64.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_AUDIT) += audit_64.o
- obj-$(CONFIG_PM) += suspend_64.o
- obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o

obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
Index: linux-2.6/arch/x86/power/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/power/Makefile
+++ linux-2.6/arch/x86/power/Makefile
@@ -1,2 +1,7 @@
-obj-$(CONFIG_PM) += cpu.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
+ifeq ($(CONFIG_X86_64),y)
+ obj-$(CONFIG_PM) += suspend_64.o
+ obj-$(CONFIG_HIBERNATION) += hibernate_asm_64.o
+else
+ obj-$(CONFIG_PM) += cpu.o
+ obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
+endif
Index: linux-2.6/arch/x86/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/Makefile
+++ linux-2.6/arch/x86/Makefile
@@ -192,8 +192,10 @@ drivers-$(CONFIG_PCI) += arch
# must be linked after kernel/
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/

-ifeq ($(CONFIG_X86_32),y)
+# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/
+
+ifeq ($(CONFIG_X86_32),y)
drivers-$(CONFIG_FB) += arch/x86/video/
endif


\
 
 \ /
  Last update: 2008-02-03 22:07    [W:0.070 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site