lkml.org 
[lkml]   [2008]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch 2.6.25-rc2-git 2/2] atmel_tc clocksource/clockevent code
On Sun, 24 Feb 2008 15:42:51 -0800
David Brownell <david-b@pacbell.net> wrote:

> > On Fri, 22 Feb 2008 17:28:37 -0800
> > David Brownell <david-b@pacbell.net> wrote:
> >
> > > +static cycle_t tc_get_cycles(void)
> > > +{
> > > + unsigned long flags;
> > > + u32 lower, upper;
> > > +
> > > + raw_local_irq_save(flags);
> >
> > Why do you need to use the raw version?
>
> This is part of the system timer code, and it should never be a
> preemption point. Plus I didn't want to waste any instruction
> cycles in code that runs before e.g. the DBGU IRQ handler would
> get called... observably, such extra cycles *do* hurt.

I don't understand what you mean by preemption point, but I guess the
non-raw version may consume some extra cycles when lockdep is enabled.

> > > +#ifdef CONFIG_GENERIC_CLOCKEVENTS
> > > +#define USE_TC_CLKEVT
> > > +#endif
> > > +
> > > +#ifdef CONFIG_ARCH_AT91RM9200
> > > +/* The AT91rm9200 system timer is a oneshot-capable 32k timer that's
> > > + * always running ... configuring a TC channel to work the same way
> > > + * would just waste some power.
> > > + */
> > > +#undef USE_TC_CLKEVT
> > > +#endif
> > > +
> > > +#ifdef USE_TC_CLKEVT
> >
> > Can't you just use #ifndef CONFIG_ARCH_AT91RM9200 and avoid the whole
> > ifdef/define/undef dance above?
>
> I can't know that some other platform won't have a better system
> timer solution, and didn't want to assume that only that single
> venerable chip had such a solution ... it's kind of puzzling to
> me (software guy) that none of the newest Atmel SOCs have better
> timer infrastructure than they do. ;)

Heh.

If we really expect using TC as a clocksource but not as a clockevent
is going to be a common usage, perhaps we should move the decision into
Kconfig?

Besides, I don't really see the difference between having a big #ifdef
expression around the whole clockevent block and having a big #ifdef
expression around the definition of USE_TC_CLKEVT except that the
latter is more code...

> > > + case CLOCK_EVT_MODE_ONESHOT:
> > > + /* slow clock, count up to RC, then irq and stop */
> >
> > Hmm. Do you really want to stop it? Won't you get better accuracy if
> > you let it run and program the next event as (prev_event + delta)?
>
> No, ONESHOT means "stop after the IRQ I asked for". And when
> tc_next_event() is asked to trigger that IRQ, it's relative to
> the instant it's requested, not relative to the last one that
> was requested (which may not have triggered yet, or may have
> been quite some time ago).

Right. Sounds like it might introduce some inaccuracy, but I guess it's
the clocksource's job to keep track of the actual time at the time of
the event.

> > > +static struct irqaction tc_irqaction = {
> > > + .name = "tc_clkevt",
> > > + .flags = IRQF_TIMER | IRQF_DISABLED,
> > > + .handler = ch2_irq,
> > > +};
> >
> > I don't think you need to define this statically. You can call
> > request_irq() at arch_initcall() time.
>
> That could be done, yes ... and using request_irq()/free_irq()
> would also let this be linked as a module, not just statically.
>
> On the other hand, doing it this way doesn't hurt either does it?
> Unless a modular build is important.

No, it doesn't hurt. Maybe we should keep it static so that we have the
option of initializing it earlier if we need to.

> > I don't think it is safe to assume that one clock per channel always
> > means one irq per channel as well...
>
> On current chips, that's how it works.

Indeed. I just don't see any fundamental reason why it has to work that
way, which is why I don't think we should depend on it.

> > What's wrong with
> >
> > irq = platform_get_irq(pdev, 2);
> > if (irq < 0)
> > irq = platform_get_irq(pdev, 0);
>
> Nothing much, except that I took the more concise path. Got patch?

Not until we reach a conclusion about the tclib core.

> > How about we make tcb_clksrc_init() global and call it from the
> > platform code with whatever TCB the platform thinks is appropriate?
>
> That could work too, but if it goes that way then there's no
> point in changes to support a modular build (e.g. the irqaction
> thing you noted above).

True.

> > Perhaps remove the prompt from ATMEL_TCB_CLKSRC and have the platform
> > select it as well? I certainly want to force this stuff on on the
> > AP7000...otherwise we'll just get lots of complaints that the thing is
> > using 4x more power than it's supposed to...
>
> Well, "force" seems the wrong approach to me. That should be a
> board-specific choice. The ap700x power budget may not be the
> most important system design consideration, so making such a
> decision at the platform ("ap700x") level seems wrong.
>
> Suppose someone has to build an AVR32 based system that uses both
> TCB modules to hook up to external hardware, so that neither one
> is available for use as a "system timer"?

Good point. Let's keep it as it is and let the board "select" it
through its defconfig.

Haavard


\
 
 \ /
  Last update: 2008-02-25 12:35    [W:0.061 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site